![Offline Offline](./styles/bmd_universal/imageset/en/icon_user_offline.png)
- Posts: 8
- Joined: Sun Oct 01, 2017 12:28 pm
Hi all,
I know this has been addressed to some extent in various posts but I have a specific question that I can't seem to find any info on.
My company recently bought a TVS pro hd and it works brilliantly for us. One of the types of content we broadcast is live presenters speaking with slides. Until this point I've been using the media player for a background, the USK with DVE to move the slides in position and one of the DSKs (cropped) for the camera on the presenter (the other DSK is used for lower third). This looks something like this:
It works fine, but makes it very difficult to frame the presenter, as I have to ask the cameraman to frame the subject like this (with very little room for error or they get cut off):
It also means while I can do DVE effects (fly in/out ect) on the slides, I can't do it for the presenter which for our content would be much better.
I would much prefer to use the USK for the camera so the cameraman can frame more normally and easily, and use the DSK for the slides. However this obviously would require moving the slides on screen which isn't possible with the DSK (only cropping).
I've seen some talk of using a multicam viewer to place a video in one of the 4 corners. While this could work, I'd love to know if there is any way (with hardware presumably) to move a source more specifically on a video stream as we'd prefer not to have the presenter completely flush with the corner for aesthetic reasons. Because the only way I can see at the moment is using an extra laptop with something like wirecast to move the vid and an i/o device to go back to the ATEM which would obviously be a bit overcomplicated...
Does anybody have any experience in this sort of thing? I love the device but the single USK is the biggest limiter for me at the moment given the requirement for great looking pic-in-pic in the field I work in (I'm really trying to squeeze every bit of functionality out of this thing
).
Many thanks for any advice or suggestions,
Mike
I know this has been addressed to some extent in various posts but I have a specific question that I can't seem to find any info on.
My company recently bought a TVS pro hd and it works brilliantly for us. One of the types of content we broadcast is live presenters speaking with slides. Until this point I've been using the media player for a background, the USK with DVE to move the slides in position and one of the DSKs (cropped) for the camera on the presenter (the other DSK is used for lower third). This looks something like this:
- full.png (20.31 KiB) Viewed 8945 times
It works fine, but makes it very difficult to frame the presenter, as I have to ask the cameraman to frame the subject like this (with very little room for error or they get cut off):
- framed shot.png (7.18 KiB) Viewed 8945 times
It also means while I can do DVE effects (fly in/out ect) on the slides, I can't do it for the presenter which for our content would be much better.
I would much prefer to use the USK for the camera so the cameraman can frame more normally and easily, and use the DSK for the slides. However this obviously would require moving the slides on screen which isn't possible with the DSK (only cropping).
I've seen some talk of using a multicam viewer to place a video in one of the 4 corners. While this could work, I'd love to know if there is any way (with hardware presumably) to move a source more specifically on a video stream as we'd prefer not to have the presenter completely flush with the corner for aesthetic reasons. Because the only way I can see at the moment is using an extra laptop with something like wirecast to move the vid and an i/o device to go back to the ATEM which would obviously be a bit overcomplicated...
Does anybody have any experience in this sort of thing? I love the device but the single USK is the biggest limiter for me at the moment given the requirement for great looking pic-in-pic in the field I work in (I'm really trying to squeeze every bit of functionality out of this thing
![:-D :D](./images/smilies/icon_e_biggrin.gif)
Many thanks for any advice or suggestions,
Mike