Thanks BM for the great firmware update to to the Micro camera’s! Nice move — adding frame rate changes TI SBus will be a game changer for many, not sure how you pulled that one off, but will check it out!
As for remotes, we have two great choices, with Kim’s Levitzer remote and Phil’s One Little Goat Remote.
Need to see if either one will handle the frame rate change.
Another big improvement for me with the Micr Studio is the improved sensor exposure sensitivity by 2 stops, and a new gain setting range from -12dB to +12dB, and RAW SDI output. Thank you BM!
In case you missed it, here are the new changes in V4.7:
What's new in Blackmagic Camera Setup 4.7
New Features for Micro Studio Camera 4K
Added 720p50, 720p59.94 and 720p60 format support.
Improved sensor exposure sensitivity by 2 stops.
Added new gain setting range which now goes from -12dB to +12dB. ATEM will need a new software update to access these new ranges via Blackmagic SDI Control Protocol.
Added RAW SDI output feature. Refer to the user manual for information about capturing and unpacking RAW SDI video.
Added support for PTZ communication on Expansion port via VISCA. Refer to the user manual for protocol details.
Added support for PTZ commands in the Blackmagic SDI Control Protocol.
Added preview tally support for the front tally light.
Added tally indication on the HDMI display overlay.
Added indication to the user that camera is genlocked on the HDMI display overlay.
Added option to change camera frame rate via S.Bus.
Added option to toggle auto focus via S.Bus.
Added option to toggle record via S.Bus for external recorders.
Added feature to pass through remote record commands as SDI and HDMI record triggers for external recorders.
New features for Micro Cinema Camera
Added record start/stop trigger on HDMI output.
Added HDMI timecode output support.
Added indication to the user that camera is genlocked in the HDMI display overlay.
Added option to change frame rate settings via S.Bus.
Added option to change codec settings via S.Bus.
Added option to toggle auto focus via S.Bus.
Fixed issue with a small vertical pixel offset between HDMI output and RAW recording on Micro Cinema Camera.
Cheers