Teranex Mini 444

Anyone know a solution to the teranex mini outputting 444 like this?

Chain is Decklink --> Teranex --> loop out to CM250, HDMI to LGOLED

Both these monitor can take a 444 signal, and when the teranex is removed from the chain, its ok.

Using the teranex as a lut box for client TV

Hi Matt,

I have the same problem. Did you find a solution?

Edo

Same problem here.!! The funny thing is that the colors on the teranex mini panel on the front are even different from what it is outputting..

Tested with a Phabrix QX 12G test device send over SDI to the teranex mini optical to HDMI. (Running latest firmware)

I will look if i can find the screenshots again for proof.

Here is a folder with photos of the problem.

The data send was 4096x2160P50 (and on P48) YCbCr:422:10 bit on 12G-SDI.

This resulted in a 4K DCI 24/25P image.. With complete OFF colors.. But the LCD on the teranex panel displays a different OFF color then the HDMI outputs..

Foto 27-06-17 10 56 09.jpg (417.97 KiB) Viewed 1509 times

And the whole folder with some more detailed images: https://www.dropbox.com/sh/b2met19r7c4x ... 2_p7a?dl=0

Unfortunately Update 6.1 do not fix the problem.
Do you have any propositions?

Edo