DaVinci Resolve on Linux - Install issues

Get answers to your questions about color grading, editing and finishing with DaVinci Resolve.
  • Author
  • Message
Offline

John Morris

  • Posts: 46
  • Joined: Mon Jul 31, 2017 12:44 am

Re: DaVinci Resolve on Linux - Install issues

PostThu Nov 30, 2017 2:13 pm

Sarah Corriher wrote:Thanks. The trouble is that there really is no adequate video editing program for Linux right now. This is the closest there is, to my knowledge. I don't even want to think about Kdenlive/Openshot. Do you know what the minimum setup would be, or is that what you already described?

If you already have a second monitor that has an audio out connector, the current cheapest solution to audio output on Linux is a DeckLink Mini Monitor (or DeckLink Mini Monitor 4K, if you want full screen UHD).
My setup is 2 monitors with one of the monitors connected to the HDMI output of the DeckLink and external speakers plugged into the audio out connector of that monitor. I also have that monitor connected to the PC graphics card via displayport so I can switch the input on the monitor for normal use. The other monitor is just connected to another port on the PC graphics card.
I would rather just be able to use system audio of course but the above system works OK.
NVIDIA 750Ti 2GB
NVIDIA driver version 390.77
DeckLink Mini Monitor 4K
32G system memory
Resolve 15.0.1.003 1 GPU, free version
Linux Mint 18.3
Offline
User avatar

Ian MacLean

  • Posts: 64
  • Joined: Tue Aug 28, 2012 10:16 pm
  • Location: SF Bay Area

Re: DaVinci Resolve on Linux - Install issues

PostThu Nov 30, 2017 9:20 pm

Thank you Dwaine. A couple of other basic questions:
-I have the BM CentOS build successfully installed, and Resolve and Fusion working.
-However, I am assuming it's more practical to NOT use this OS install as one's main OS for everyday use.
-I have other conventional drives I can install later, but right now I have two 500 GB SSD's.
-I intend to put another Linux distro on the same SSD as the BM CentOS build, and leave the second SSD available for fast video caching by Resolve (and Fusion).
-Does this make sense, or would it be better to organize it another way? Any recommendations on partition size would also be welcome.

Many thanks.

*I forgot. Will your CentOS build want to auto update? If so, how do I turn that off?

Dwaine Maggart wrote:@Ian: ...No, you should not update the OS after install.

When there is a new CentOS version we support, we'll have a new ISO image for that version.
Offline
User avatar

Dwaine Maggart

Blackmagic Design

  • Posts: 4411
  • Joined: Wed Aug 22, 2012 2:53 pm

Re: DaVinci Resolve on Linux - Install issues

PostThu Nov 30, 2017 10:34 pm

If it asks to update, don't. I don't think it will.

You are correct that our ISO image is pretty much setup as a dedicated Resolve system, and it may not be the best practical everyday beater machine.

You can install Resolve on an existing build, as long as it's CentOS or RHEL 7 based, as long as you don't mind getting the NVIDIA driver installed (seems to be less than trivial for some) or installing PostgreSQL, if you need it.

As evidenced in this long forum thread, you can get Resolve installed on other distro's with varying degrees of effort and success, but we currently target and support CentOS/RHEL.
Dwaine Maggart
Blackmagic Design DaVinci Support
Offline
User avatar

Ian MacLean

  • Posts: 64
  • Joined: Tue Aug 28, 2012 10:16 pm
  • Location: SF Bay Area

Re: DaVinci Resolve on Linux - Install issues

PostMon Dec 04, 2017 7:19 pm

*Note for others on Updates to the BM CentOS build: So far, the only update notification that's been an issue is when shutting down the OS. In the confirmation window, there is an update option that's useful to be aware of as you'll need to override your muscle memory and NOT select it.
Offline

Gaspard Bariller

  • Posts: 1
  • Joined: Sun Dec 10, 2017 2:03 pm

Re: DaVinci Resolve on Linux - Install issues

PostSun Dec 10, 2017 2:27 pm

Hello to everyone,

I'm currently experiencing launching problems of Da Vinci Resolve 14.11 on OpenSuSe Tumbleweed. Here is the error I get if I try to run it from command line :
Code: Select all
/opt/resolve/bin/resolve: error while loading shared libraries: libssl.so.10: cannot open shared object file: No such file or directory


I've tried to install libssl using zypper and to create symbolic links (ln -s) in diverse places to help Resolve to find the "missing" libraries but so far it has'nt worked...

I'm using a Nvidia Quadro 3000M on an HP Elitebook 8760w, Da Vinci Resolve worked perfectly under Windows 10 (same PC). I installed Nvidia drivers (from community repos, installation from downladed file could'nt work somehow).

I'm stuck here, hope someone will be able to give me a hand :).
Offline

Ondra Mayer

  • Posts: 6
  • Joined: Mon Dec 11, 2017 3:34 pm

Re: DaVinci Resolve on Linux - Install issues

PostMon Dec 11, 2017 3:43 pm

Hello All,

Just installed fresh system from iso (14.1), centos 7 on recommended hw.
Everything works until system update (new kernel version) is performed. After updating kernel, system is not able to boot. Looks like boot partition is too small to run the update.

Can you please advice that small boot partition (1Gb) is being created by design by automatic install to prevent updates?

Thanks much, O.
Offline

Audacieuse-Galerie Sarl

  • Posts: 33
  • Joined: Sun Aug 27, 2017 3:21 pm
  • Location: Carouge Geneve

Re: DaVinci Resolve on Linux - Install issues

PostTue Dec 12, 2017 5:29 pm

My feedback: We have been able to install centos. The drivers are painful but we get there with online tutorials. Test two Beta versions then two stable versions, then buy a 4K BMD card. Not having any answer as to the smooth running of the studio version as to the color tab on linux leaves me sad. I have two film projects started on davinci and unfortunately he can not find the word FIN. Three months that lasts. I am very sad.
Offline

Arthur Sergin

  • Posts: 17
  • Joined: Wed Oct 11, 2017 7:37 am

Re: DaVinci Resolve on Linux - Install issues

PostWed Dec 13, 2017 7:47 am

Gaspard Bariller wrote:Hello to everyone,

I'm currently experiencing launching problems of Da Vinci Resolve 14.11 on OpenSuSe Tumbleweed. Here is the error I get if I try to run it from command line :
Code: Select all
/opt/resolve/bin/resolve: error while loading shared libraries: libssl.so.10: cannot open shared object file: No such file or directory



Different Linux distros have different places where shared libs live. This is one of the reasons which makes it hard to fit all Linux distros at once. You should run 'ldd' command against resolve full path in order to see which libs are not fit and where to put your symlinks.
Code: Select all
#ldd /opt/resolve/bin/resolve

Find all places with 'Not found' state and create symlinks to appropriate libs on your system. Hope that helps.
Hardware: Ryzen 7 1700, PRIME X370-PRO, 16Gb DDR4, GeForce GTX 1070, NVMe 960 EVO 250GB, WD 7200rpm 1Tb
OS: Ubuntu Linux 16.04x
Nvidia Driver: v396.26
Cuda: 9.2.88
Offline

Steve Baxter

  • Posts: 5
  • Joined: Wed Sep 21, 2016 12:55 pm

Re: DaVinci Resolve on Linux - Install issues

PostFri Dec 15, 2017 9:04 am

For information for others installing on Linux:

I have installed Desktop Video and Resolve 14 free on Ubuntu Studio 14 and have audio output in Resolve working via BM Intensity Pro PCIE card through the analogue audio connectors on the breakout cable.

The only issue I have come across so far is that engaging the compressor or limiter / gate in a fairlight channel strip cause the channel output level to jump very high and distort. The EQ functionality is fine it's just the engaging dynamics which causes this to happen.
Resolve 14.1
Linux Ubuntu Studio 14
128Gb Samsumg EVO SSD (system)
2Tb Toshiba Red x 2
1Tb Hitachi drive
16Gb RAM
nVidia GTX950 (2Gb)
Offline

Daniel Tufvesson

  • Posts: 121
  • Joined: Sun Sep 18, 2016 11:03 am
  • Location: Stockholm, Sweden

Re: DaVinci Resolve on Linux - Install issues

PostSun Dec 17, 2017 12:21 am

I have updated my Resolve DEB package creator for Resolve version 14.2

Instructions here --> viewtopic.php?f=21&t=56878&start=500#p361701

makeresolvedeb_14.2-1.sh.tar.gz
(2.16 KiB) Downloaded 170 times
Shoot - BMCC | BMPC | BMPCC | BMVA
Edit - Debian Linux 9 | Resolve Studio 15.0.1 | i7-3930K CPU | X79 MB | 32GB RAM | GTX1080 GPU | Decklink SDI
Offline

John Morris

  • Posts: 46
  • Joined: Mon Jul 31, 2017 12:44 am

Re: DaVinci Resolve on Linux - Install issues

PostSun Dec 17, 2017 3:31 am

Steve Baxter wrote:For information for others installing on Linux:

I have installed Desktop Video and Resolve 14 free on Ubuntu Studio 14 and have audio output in Resolve working via BM Intensity Pro PCIE card through the analogue audio connectors on the breakout cable.

The only issue I have come across so far is that engaging the compressor or limiter / gate in a fairlight channel strip cause the channel output level to jump very high and distort. The EQ functionality is fine it's just the engaging dynamics which causes this to happen.


What version is installed? An earlier version of 14 had this problem, but was fixed a while ago in 14.0.1 at least it was working with my DeckLink 4K up to 14.1.1. I haven't tried 14.2 yet.
NVIDIA 750Ti 2GB
NVIDIA driver version 390.77
DeckLink Mini Monitor 4K
32G system memory
Resolve 15.0.1.003 1 GPU, free version
Linux Mint 18.3
Offline

John Morris

  • Posts: 46
  • Joined: Mon Jul 31, 2017 12:44 am

Re: DaVinci Resolve on Linux - Install issues

PostSun Dec 17, 2017 3:41 am

Daniel Tufvesson wrote:I have updated my Resolve DEB package creator for Resolve version 14.2

Instructions here --> viewtopic.php?f=21&t=56878&start=500#p361701

makeresolvedeb_14.2-1.sh.tar.gz


Thank you for the effort you put into this. It does make it easier for us Ubuntu based users.
NVIDIA 750Ti 2GB
NVIDIA driver version 390.77
DeckLink Mini Monitor 4K
32G system memory
Resolve 15.0.1.003 1 GPU, free version
Linux Mint 18.3
Offline

Steve Baxter

  • Posts: 5
  • Joined: Wed Sep 21, 2016 12:55 pm

Re: DaVinci Resolve on Linux - Install issues

PostMon Dec 18, 2017 1:49 pm

What version is installed? An earlier version of 14 had this problem, but was fixed a while ago in 14.0.1 at least it was working with my DeckLink 4K up to 14.1.1. I haven't tried 14.2 yet.


This was 14.1 I haven't installed 14.2 yet as I only just installed 14.1 but I will try 14.2 this evening to see if the problem remains with the dynamics section.
Resolve 14.1
Linux Ubuntu Studio 14
128Gb Samsumg EVO SSD (system)
2Tb Toshiba Red x 2
1Tb Hitachi drive
16Gb RAM
nVidia GTX950 (2Gb)
Offline

Neti_Treves

  • Posts: 3
  • Joined: Tue Dec 19, 2017 3:44 pm

Re: DaVinci Resolve on Linux - Install issues

PostTue Dec 19, 2017 4:18 pm

Hi,
I tried to install DaVinci Resolve on my Ubuntu 16.04

I executed the script and linked all the libraries in /opt/resolve/lib

I also manually installed the liblog4cxx which apparently was demanded.

The first time it opened and asked me to config some stuff, but then nothing.

When I run it from terminal it does this:

Code: Select all
$ /opt/resolve/bin/resolve
ActCCMessage Already in Table: Code= 2282, Mode=  0, Level=  0, CmdKey= 8, Option= 0
ActCCMessage Already in Table: Code= c005, Mode= 13, Level=  1, CmdKey= -1, Option= 0
ActCCMessage Already in Table: Code= c006, Mode= 13, Level=  1, CmdKey= -1, Option= 0
ActCCMessage Already in Table: Code= c007, Mode= 13, Level=  1, CmdKey= -1, Option= 0
14.2 (#012)
Main thread starts: 3DD81B40
[0x7f6e3dd81b40] | Undefined            | INFO  | 2017-12-19 17:18:09,106 | --------------------------------------------------------------------------------
[0x7f6e3dd81b40] | Undefined            | INFO  | 2017-12-19 17:18:09,106 | Loaded log config from /opt/resolve/configs/log-conf.xml
[0x7f6e3dd81b40] | Undefined            | INFO  | 2017-12-19 17:18:09,106 | --------------------------------------------------------------------------------


What should I do?

thanks!
Offline

Normand_Nadon

  • Posts: 1
  • Joined: Wed Dec 20, 2017 2:49 pm

Re: DaVinci Resolve on Linux - Install issues

PostWed Dec 20, 2017 3:15 pm

Hello Everyone,
After a week of desperate efforts, I am turning to community knowledge!

I am trying to run Resolve on Ubuntu x64 16.04.1 on Kernel 4.10.0-42.
The system is an AMD FX rig with and AMD HD7970 GPU

I had the latest MESA 17.2 installed but the program would not even load with that config.

I switched to amdgpu-pro with ROCm installed as per AMDs site instructions

The program loads the initial project selection menu but won't go past that.
It throws an OpenCL error : No OpenCL boards available on chassis 1.
As soon as I click on "open" the program shuts down.

Did some of you have some success on a similar setup?

- Normand
Offline
User avatar

Doug Marsh

  • Posts: 62
  • Joined: Thu Mar 20, 2014 9:33 pm

Re: DaVinci Resolve on Linux - Install issues

PostWed Dec 20, 2017 6:38 pm

Daniel Tufvesson wrote:I have updated my Resolve DEB package creator for Resolve version 14.2

Instructions here --> viewtopic.php?f=21&t=56878&start=500#p361701

makeresolvedeb_14.2-1.sh.tar.gz


Is there a way I can gift you something to show my appreciation?! You rock!

--Doug
Offline

John Morris

  • Posts: 46
  • Joined: Mon Jul 31, 2017 12:44 am

Re: DaVinci Resolve on Linux - Install issues

PostThu Dec 21, 2017 12:08 am

Neti_Treves wrote:Hi,
I tried to install DaVinci Resolve on my Ubuntu 16.04

I executed the script and linked all the libraries in /opt/resolve/lib

I also manually installed the liblog4cxx which apparently was demanded.

The first time it opened and asked me to config some stuff, but then nothing.

...

What should I do?

thanks!

Have you tried installing via Daniel Tufvesson's DEB package builder? You will find his post on the 17th Dec.
NVIDIA 750Ti 2GB
NVIDIA driver version 390.77
DeckLink Mini Monitor 4K
32G system memory
Resolve 15.0.1.003 1 GPU, free version
Linux Mint 18.3
Offline

Neti_Treves

  • Posts: 3
  • Joined: Tue Dec 19, 2017 3:44 pm

Re: DaVinci Resolve on Linux - Install issues

PostThu Dec 21, 2017 12:15 am

I just tried but it doesn't work.

when I give "/opt/resolve/bin/resolve vv" it gives me this:

Code: Select all
ActCCMessage Already in Table: Code= 2282, Mode=  0, Level=  0, CmdKey= 8, Option= 0
ActCCMessage Already in Table: Code= c005, Mode= 13, Level=  1, CmdKey= -1, Option= 0
ActCCMessage Already in Table: Code= c006, Mode= 13, Level=  1, CmdKey= -1, Option= 0
ActCCMessage Already in Table: Code= c007, Mode= 13, Level=  1, CmdKey= -1, Option= 0
14.2 (#012)
Main thread starts: C71DDB40
Printing Stack Info
/opt/resolve/bin/resolve() [0x3c5e96c]
/opt/resolve/bin/resolve() [0x3e04305]
/opt/resolve/bin/resolve() [0x3d0cc06]
/opt/resolve/bin/resolve() [0x3d0c070]
/opt/resolve/bin/resolve() [0x3ef4fdb]
/opt/resolve/bin/../libs/libQt5Core.so.5(_ZNK13QMetaProperty4readEPK7QObject+0x10c) [0x7f2dc5488f1c]
/opt/resolve/bin/resolve() [0x3e002c5]
/opt/resolve/bin/resolve() [0x3dbf044]
/opt/resolve/bin/resolve() [0x3e91c63]
/opt/resolve/bin/resolve() [0x3e9580b]
/opt/resolve/bin/resolve() [0x3e95c15]
/opt/resolve/bin/resolve() [0x3e9652a]
/opt/resolve/bin/resolve() [0x3e9b44c]
/opt/resolve/bin/resolve() [0xd16140]
/opt/resolve/bin/resolve() [0xd16299]
/opt/resolve/bin/resolve() [0xcfb89d]
/opt/resolve/bin/resolve() [0x71e818]
/opt/resolve/bin/resolve(main+0x4d8) [0x700e98]
/lib/x86_64-linux-gnu/libc.so.6(__libc_start_main+0xf0) [0x7f2daed24830]
/opt/resolve/bin/resolve() [0x6ffc09]
log4cxx: No appender could be found for logger (DbCommon2).
log4cxx: Please initialize the log4cxx system properly.
resolve: AppConfig.cpp:159: void AppConfig::LoadAllSiteInfo(): asserzione "m_SiteEnabledIdx > 0" non riuscita.
Annullato (core dump creato)


I think the problem is still log4cxx, right?
Offline
User avatar

Dwaine Maggart

Blackmagic Design

  • Posts: 4411
  • Joined: Wed Aug 22, 2012 2:53 pm

Re: DaVinci Resolve on Linux - Install issues

PostThu Dec 21, 2017 12:42 am

The log4cxx errors are normal and are not indicative of a problem.
Dwaine Maggart
Blackmagic Design DaVinci Support
Offline

Neti_Treves

  • Posts: 3
  • Joined: Tue Dec 19, 2017 3:44 pm

Re: DaVinci Resolve on Linux - Install issues

PostThu Dec 21, 2017 1:10 am

I understand, what should I look for then?

The program doesn't even start....

I'm using
Code: Select all
00:02.0 VGA compatible controller: Intel Corporation 3rd Gen Core processor Graphics Controller (rev 09)


maybe it's this?
Offline
User avatar

Doug Marsh

  • Posts: 62
  • Joined: Thu Mar 20, 2014 9:33 pm

Re: DaVinci Resolve on Linux - Install issues

PostThu Dec 21, 2017 5:43 am

As mentioned by Dwaine Maggart, should not cause a problem -- but for those wanting research, I think the command to install that library is:

sudo apt-get install liblog4cxx10v5

(mind you I've done that only on one machine but forgot to check the output -- think it cause that "warning" to go away on Ubuntu 16.04 -- I was using the makedeb process and installing the deb FWIW).

--Doug
Offline

Orlando Esponda

  • Posts: 21
  • Joined: Mon Aug 21, 2017 7:49 pm
  • Location: Mexico City

Re: DaVinci Resolve on Linux - Install issues

PostThu Dec 21, 2017 6:21 am

Normand_Nadon wrote:Hello Everyone,
After a week of desperate efforts, I am turning to community knowledge!

I am trying to run Resolve on Ubuntu x64 16.04.1 on Kernel 4.10.0-42.
The system is an AMD FX rig with and AMD HD7970 GPU

I had the latest MESA 17.2 installed but the program would not even load with that config.

I switched to amdgpu-pro with ROCm installed as per AMDs site instructions

The program loads the initial project selection menu but won't go past that.
It throws an OpenCL error : No OpenCL boards available on chassis 1.
As soon as I click on "open" the program shuts down.

Did some of you have some success on a similar setup?

- Normand


Not a similar setup at all, but I was having problems with openCL and Fedora. I found a solution:

Code: Select all
dnf remove mesa-libOpenCL
dnf remove beignet


To be honest, I wouldn't know how that translates to Ubuntu, but it might give you a clue about where to look at.
Offline

Steve Baxter

  • Posts: 5
  • Joined: Wed Sep 21, 2016 12:55 pm

Re: DaVinci Resolve on Linux - Install issues

PostSat Dec 23, 2017 5:41 pm

John Morris wrote:
Steve Baxter wrote:For information for others installing on Linux:

I have installed Desktop Video and Resolve 14 free on Ubuntu Studio 14 and have audio output in Resolve working via BM Intensity Pro PCIE card through the analogue audio connectors on the breakout cable.

The only issue I have come across so far is that engaging the compressor or limiter / gate in a fairlight channel strip cause the channel output level to jump very high and distort. The EQ functionality is fine it's just the engaging dynamics which causes this to happen.


What version is installed? An earlier version of 14 had this problem, but was fixed a while ago in 14.0.1 at least it was working with my DeckLink 4K up to 14.1.1. I haven't tried 14.2 yet.


Installed version 14.2 and the problem is gone. Now able to output the audio through the Decklink card and utilise the dynamics without issue.
Resolve 14.1
Linux Ubuntu Studio 14
128Gb Samsumg EVO SSD (system)
2Tb Toshiba Red x 2
1Tb Hitachi drive
16Gb RAM
nVidia GTX950 (2Gb)
Offline
User avatar

Noel Sterrett

  • Posts: 316
  • Joined: Wed Aug 22, 2012 9:12 pm

Re: DaVinci Resolve on Linux - Install issues

PostWed Jan 03, 2018 2:53 pm

Just upgraded to 14.2. Audio via Decklink works fine in the Fairlight page, but nothing at all (no sound, meters) in Media, Edit or Deliver.

Anyone else have this issue?

Cheers.
Admit One Pictures
Ubuntu 18.04 | Asus Z10 Xeon*2 32G | GTX 1080 8G | Resolve Studio 15b3 | Desktop Video 10.9.11
Offline

Bryan Kelley

  • Posts: 17
  • Joined: Thu Aug 03, 2017 4:07 am

Re: DaVinci Resolve on Linux - Install issues

PostWed Jan 03, 2018 9:43 pm

With all the new advancements in CPU GPU links with PCI-gen 4 and NVLINK with Power 8 and 9 running Linux any thought to porting to a IBM Linux on Power system for 32-64 Core and 1000 of GPU cores?
Your RED HAt 7.3 requirement is already met on P8 Systems.


Bryan
Offline
User avatar

Noel Sterrett

  • Posts: 316
  • Joined: Wed Aug 22, 2012 9:12 pm

Re: DaVinci Resolve on Linux - Install issues

PostSat Jan 06, 2018 1:40 pm

Anyone found a way to get audio out of a laptop?

Cheers.
Admit One Pictures
Ubuntu 18.04 | Asus Z10 Xeon*2 32G | GTX 1080 8G | Resolve Studio 15b3 | Desktop Video 10.9.11
Offline

Jason Leaman

  • Posts: 2
  • Joined: Sun Dec 31, 2017 10:48 pm

Re: DaVinci Resolve on Linux - Install issues

PostSun Jan 07, 2018 2:56 am

I am wondering who on here run's this software successfully and what OS they use ? I have a mega powerful workstation :P and want to convert to Linux from Windows..

I will buy the os if it's what's recommended and works. IE Redhat.. etc etc..
Offline

blaselteso

  • Posts: 3
  • Joined: Sun Jan 07, 2018 6:23 pm
  • Real Name: Alexander Exquemelin

Davinci-Resolve installed but not started

PostSun Jan 07, 2018 7:02 pm

My installation of Davinci-Resolve 14.2. on a Dell-Notebook (Latitude E 7450, with Intel-HD 5500 Grafic) produced a contradictory result on the same machine but under different operation systems: Under Win 8.1. it works fine, under Linux Debian not. The installation on both OS was so far succesful. But under Linux-Debian I cannot't start it. The message is:

/opt/resolve/bin/resolve: error while loading shared libraries: libcudart.so.7.5: cannot open shared object file: No such file or directory


If the message is due to the missing NVIDIA-Card so I ask myself why it works under Windows? And why not under Debian? Is there something what I have overseen?

Thanks for your help.

blaselteso
Offline

Iñigo Figuero

  • Posts: 45
  • Joined: Mon Sep 04, 2017 9:55 am

Re: DaVinci Resolve on Linux - Install issues

PostMon Jan 08, 2018 6:16 am

Install cuda libraries and try again.
Offline
User avatar

Dwaine Maggart

Blackmagic Design

  • Posts: 4411
  • Joined: Wed Aug 22, 2012 2:53 pm

Re: DaVinci Resolve on Linux - Install issues

PostTue Jan 09, 2018 6:46 pm

Edited to replace Thunderbolt with USB3.

@Noel: With regards to audio monitoring with Resolve Linux on a laptop, currently not very feasible, as we have no Linux support for our Thunderbolt I/O devices USB3 I/O devices.

If you have a Thunderbolt port, and an OS that supports it, and that is supported by Desktop Video, audio might work with an UltraStudio product, like a Mini Monitor.
Last edited by Dwaine Maggart on Wed Jan 10, 2018 3:12 am, edited 1 time in total.
Dwaine Maggart
Blackmagic Design DaVinci Support
Offline
User avatar

Noel Sterrett

  • Posts: 316
  • Joined: Wed Aug 22, 2012 9:12 pm

Re: DaVinci Resolve on Linux - Install issues

PostTue Jan 09, 2018 10:25 pm

Thanks Dwaine,

I just thought perhaps one of your USB boxes might work. Now that I'm able to read Sony AXSM drives in Linux, audio is the only thing holding back a laptop Linux solution on set. I'm sure it's on the list somewhere.

Cheers.
Admit One Pictures
Ubuntu 18.04 | Asus Z10 Xeon*2 32G | GTX 1080 8G | Resolve Studio 15b3 | Desktop Video 10.9.11
Offline
User avatar

Dwaine Maggart

Blackmagic Design

  • Posts: 4411
  • Joined: Wed Aug 22, 2012 2:53 pm

Re: DaVinci Resolve on Linux - Install issues

PostWed Jan 10, 2018 3:08 am

@Noel, Thanks for mentioning that. USB3 is actually what I meant. No support for the USB BMD I/O devices in Linux.

Desktop Video actually does support Thunderbolt in Linux to some extent, so possible that an UltraStudio I/O device could work if you had the right OS and drivers and a Thunderbolt port.
Dwaine Maggart
Blackmagic Design DaVinci Support
Offline
User avatar

Marc Gasser

  • Posts: 58
  • Joined: Tue Feb 07, 2017 8:14 pm

Re: DaVinci Resolve on Linux - Install issues

PostWed Jan 10, 2018 9:46 pm

Happy 2018 to everyone...

As a creative who switched from OSX/Adobe to Ubuntu/Blackmagicdesign Studio versions,
I am wondering...

1.) Do we ever get .mp3 support in DaVinci Resolve Studio or do we always have to separately extract and convert the audio streams from the .mp4 files ?

2.) When does someone start a second Resolve on Linux forum tread which will contain a wishlist for upcoming releases, or even better, when will Blackmagic for Linux release some kind of roadmap ?

3.) @Dwaine Maggart, are you the only BMD person who support the Linux community (btw. thanks for your effort!!) or is there a possibility to motivate more people from your team to give us answers ?

4.) How many Blackmagicdesign DaVinci Resolve and Fusion Linux users are we ?

5.) Will Fusion Studio on Linux ever support audio from video files ?
[code][/code]Xubuntu 16.04, 2x Intel Xeon Six Core, Nvidia GeForce 960 4GB, Nvidia 396 proprietary driver, 96 Gb Ram.

https://www.pocketvj.com
Offline

Tero Ahlfors

  • Posts: 362
  • Joined: Fri Apr 03, 2015 3:02 pm

Re: DaVinci Resolve on Linux - Install issues

PostThu Jan 11, 2018 7:25 am

Marc Gasser wrote:5.) Will Fusion Studio on Linux ever support audio from video files ?


This hasn't been a thing on any OS version. You can bring in audio as a separate wav file though.
Offline

Mário Pinto

  • Posts: 2
  • Joined: Thu Jan 11, 2018 10:31 pm

Re: DaVinci Resolve on Linux - Install issues

PostThu Jan 11, 2018 10:55 pm

Hello!

First, Let me thank BMD and all this great community for the effort on supporting Linux.
Haven't worked on Resolve yet, but I'm thrilled with the idea of using it in the near future. For now I'm trying to setup things:
- ASUS A88XM-A-USB-31
- AMD A10-7870K Radeon R7, 12 Compute Cores 4C+8G
- CORSAIR 32GB DDR3 1600MHz
- Debian GNU/Linux (4.9.0-5-amd64) - stable - stretch
- Resolve 14.2 using makeresolvedeb_14.2-1.sh (thanks to Daniel Tufvesson)

Issues:
[SOLVED]
/opt/resolve/bin/resolve: error while loading shared libraries: libOpenCL.so.1: cannot open shared object file: No such file or directory
Installed OpenCL with: sudo apt-get install ocl-icd-opencl-dev

[SOLVED]
Can't load libpng12-0
As libpng12-0 isn't available for stretch (only, wheezy, jessie and sid), download DEB file from jessie and manually installed it solve this issue

After this /opt/resolve/bin/resolve starts with first time assistant (intro, default resolution, project location, etc). Afterwards it will abort with the following issue.

[UNSOLVED]
resolve: AppConfig.cpp:159: void AppConfig::LoadAllSiteInfo(): Assertion `m_SiteEnabledIdx > 0' failed.
Aborted


And what you think about the hardware, will Resolve run OK... In the first time assistant it stated that the Graphics component couldn't do advanced coloring but would be fine with simple things.

Any input on this would be great!
Mário Pinto
-=( HW | MB A88XM-A-USB-31 | AMD A10-7870K radeon R7 | 32GB RAM )=-
-=( SW | debian GNU/Linux 4.9.0-5-amd64 stable/stretch )=-
Offline

Mikey Yeah

  • Posts: 1
  • Joined: Fri Jan 12, 2018 6:39 am

Re: DaVinci Resolve on Linux - Install issues

PostFri Jan 12, 2018 7:05 am

Hi all. previous user of resolve on win 7, and now 10 but looking to have a 2nd system at home to use as well as my workstation for basic edits etc. its a lowly box without too good a spec but im hoping itll be good enough just a lil slow. currently running Core2Duo 6600 @ 2.4ghz, 4gb ram (very low i know), nvidia GT740 with 1gb DDR5 vram.

ive installed Resolve 14 on my lubuntu 17.10 box, using all the tips n tricks here so far in this thread. i had the lib64 issues, lib12png, updated to latest nvidia drivers etc, retried installing using the .deb script (thankyou so much for doing that even though it didnt help me personally). Using all the prev posts i got as far as all the way through the welcome tour and setup. it suggested this box was underpowered for grading but should be ok for editing. Now when i open it however i get basically the same errors as everyone else. sometimes a splash screen, sometimes not, but always no starting. starting in a terminal brings this error
Code: Select all
ActCCMessage Already in Table: Code= 2282, Mode=  0, Level=  0, CmdKey= 8, Option= 0
ActCCMessage Already in Table: Code= c005, Mode= 13, Level=  1, CmdKey= -1, Option= 0
ActCCMessage Already in Table: Code= c006, Mode= 13, Level=  1, CmdKey= -1, Option= 0
ActCCMessage Already in Table: Code= c007, Mode= 13, Level=  1, CmdKey= -1, Option= 0
14.2 (#012)
Main thread starts: 9A08FB80
[0x7f6a9a08fb80] | Undefined            | INFO  | 2018-01-12 17:48:13,339 | --------------------------------------------------------------------------------
[0x7f6a9a08fb80] | Undefined            | INFO  | 2018-01-12 17:48:13,339 | Loaded log config from /opt/resolve/configs/log-conf.xml
[0x7f6a9a08fb80] | Undefined            | INFO  | 2018-01-12 17:48:13,339 | --------------------------------------------------------------------------------

rolling log gives me this
Code: Select all
<<<some previous log attempts>>>
[0x7f7709c0eb80] | Undefined            | INFO  | 2018-01-12 12:21:38,643 | --------------------------------------------------------------------------------
[0x7f7709c0eb80] | Undefined            | INFO  | 2018-01-12 12:21:38,659 | Loaded log config from /opt/resolve/configs/log-conf.xml
[0x7f7709c0eb80] | Undefined            | INFO  | 2018-01-12 12:21:38,659 | --------------------------------------------------------------------------------
[0x7f7709c0eb80] | Main                 | INFO  | 2018-01-12 12:21:39,349 | Updating display GPU information...
[0x7f7709c0eb80] | Main                 | INFO  | 2018-01-12 12:21:39,786 | Detecting Main Display properties
[0x7f7709c0eb80] | Main                 | INFO  | 2018-01-12 12:21:39,793 | Process to detect main display has finished
[0x7f7709c0eb80] | Main                 | INFO  | 2018-01-12 12:21:39,801 | Fallback process to detect main display has finished
[0x7f7709c0eb80] | Main                 | INFO  | 2018-01-12 12:21:39,801 | GPU Name = 'NVIDIA GeForce GT 740', Main display = 1
[0x7f7709c0eb80] | Main                 | INFO  | 2018-01-12 12:21:39,954 | Only 1 NVIDIA display GPU found. Using CUDA for processing.
[0x7f7709c0eb80] | Main                 | INFO  | 2018-01-12 12:21:39,954 | Setting LsManager.3.NumGPUs = 1
[0x7f7709c0eb80] | Main                 | INFO  | 2018-01-12 12:21:39,954 | Setting LsManager.3.DisplayGPUName = NVIDIA GeForce GT 740
[0x7f7709c0eb80] | Main                 | INFO  | 2018-01-12 12:21:39,954 | Setting LsManager.3.DisplayGPUIndex = 0
[0x7f7709c0eb80] | Main                 | INFO  | 2018-01-12 12:21:39,954 | Setting LsManager.3.DisplayGPUBusID = 1
[0x7f7709c0eb80] | IO                   | INFO  | 2018-01-12 12:21:39,954 | RED InitializeSdk with library path at /opt/resolve/libs
[0x7f7709c0eb80] | IO                   | INFO  | 2018-01-12 12:21:40,224 | R3DAPI 7.0.5-35I50 (20171120 L64S) R3DSDK 7.0.5-35I50 (20171120 L64D) RED CUDA 7.0.5-44406 (20171117) RED OPENCL 7.0.5-44406 (20171117) [/opt/resolve/libs/] init is successful
[0x7f7709c0eb80] | Main                 | INFO  | 2018-01-12 12:21:40,224 | Decklink model name: '', version: ''
[0x7f7709c0eb80] | Main                 | INFO  | 2018-01-12 12:21:40,298 | Installed custom font: Open Sans
[0x7f7709c0eb80] | Main                 | INFO  | 2018-01-12 12:21:40,319 | Installed custom font: Open Sans
[0x7f7709c0eb80] | Main                 | INFO  | 2018-01-12 12:21:40,362 | Finished loading Application style sheet
[0x7f76bf6f8700] | LeManager            | INFO  | 2018-01-12 12:21:40,723 | 521, 38
[0x7f7709c0eb80] | BtCommon             | INFO  | 2018-01-12 12:21:43,077 | Memory config: reserved=6000M pinned=4000M log=0
[0x7f7709c0eb80] | BtCommon             | INFO  | 2018-01-12 12:21:43,077 | Using default pooled memory manager
[0x7f7709c0eb80] | BtCommon             | INFO  | 2018-01-12 12:21:43,085 | Daemon DPDecoder is started 1513
[0x7f7709c0eb80] | BtCommon             | INFO  | 2018-01-12 12:21:43,085 | Daemon DPDecoder is started 1514
[0x7f7709c0eb80] | BtCommon             | INFO  | 2018-01-12 12:21:43,085 | Daemon DPDecoder is started 1515
[0x7f7709c0eb80] | BtCommon             | INFO  | 2018-01-12 12:21:43,085 | Daemon DPDecoder is started 1516
[0x7f7709c0eb80] | BtCommon             | INFO  | 2018-01-12 12:21:43,086 | Daemon DPDecoder is started 1517
[0x7f7709c0eb80] | BtCommon             | INFO  | 2018-01-12 12:21:43,086 | Daemon DPDecoder is started 1518
[0x7f7709c0eb80] | BtCommon             | INFO  | 2018-01-12 12:21:43,086 | Daemon DPDecoder is started 1519
[0x7f7709c0eb80] | BtCommon             | INFO  | 2018-01-12 12:21:43,086 | Daemon DPDecoder is started 1520
[0x7f7709c0eb80] | SyManager            | INFO  | 2018-01-12 12:21:43,128 | Total: 20, NumDtThreads: 8, NumComms: 0, NumSites: 1

[0x7f7709c0eb80] | SyManager            | INFO  | 2018-01-12 12:21:43,129 | Lookaheads -> playback = 20, record = 20, stop = 2

[0x7f76aeffd700] | SyManager            | ERROR | 2018-01-12 12:21:43,129 | Failed to connect to panel socket
[0x7f76aeffd700] | SyManager            | ERROR | 2018-01-12 12:21:43,129 | DRIVER: open /var/tmp/davinci_socket failed
[0x7f769a7fc700] | DtManager            | INFO  | 2018-01-12 12:21:43,129 | Dt Data Handler Thread Started
[0x7f76aeffd700] | SyManager            | ERROR | 2018-01-12 12:21:43,130 | Failed to connect to panel socket
[0x7f7709c0eb80] | DtManager            | INFO  | 2018-01-12 12:21:43,129 | Using 8 generic IO threads
[0x7f7709c0eb80] | DtManager            | INFO  | 2018-01-12 12:21:43,130 | Total of 16 IO threads (including 8 generic and 8 Red decode threads)
[0x7f76ad7fa700] | GsManager            | INFO  | 2018-01-12 12:21:43,130 | Gs Processor Thread ----- (140147693692672)

[0x7f76997fa700] | DtManager            | INFO  | 2018-01-12 12:21:43,130 | Dt Worker Thread Started
[0x7f768ffff700] | DtManager            | INFO  | 2018-01-12 12:21:43,130 | Dt Worker Thread Started
[0x7f768f7fe700] | DtManager            | INFO  | 2018-01-12 12:21:43,130 | Dt Worker Thread Started
[0x7f7698ff9700] | DtManager            | INFO  | 2018-01-12 12:21:43,130 | Dt Worker Thread Started
[0x7f7699ffb700] | DtManager            | INFO  | 2018-01-12 12:21:43,130 | Dt Worker Thread Started
[0x7f768effd700] | DtManager            | INFO  | 2018-01-12 12:21:43,130 | Dt Worker Thread Started
[0x7f768e7fc700] | DtManager            | INFO  | 2018-01-12 12:21:43,130 | Dt Worker Thread Started
[0x7f768d7fa700] | DtManager            | INFO  | 2018-01-12 12:21:43,130 | Dt Worker Thread Started
[0x7f768dffb700] | DtManager            | INFO  | 2018-01-12 12:21:43,131 | Dt Worker Thread Started
[0x7f768c7f8700] | DtManager            | INFO  | 2018-01-12 12:21:43,131 | Dt Worker Thread Started
[0x7f768cff9700] | DtManager            | INFO  | 2018-01-12 12:21:43,131 | Dt Worker Thread Started
[0x7f768bff7700] | DtManager            | INFO  | 2018-01-12 12:21:43,131 | Dt Worker Thread Started
[0x7f768b7f6700] | DtManager            | INFO  | 2018-01-12 12:21:43,131 | Dt Worker Thread Started
[0x7f768aff5700] | DtManager            | INFO  | 2018-01-12 12:21:43,131 | Dt Worker Thread Started
[0x7f768a7f4700] | DtManager            | INFO  | 2018-01-12 12:21:43,131 | Dt Worker Thread Started
[0x7f7689ff3700] | DtManager            | INFO  | 2018-01-12 12:21:43,131 | Dt Worker Thread Started
[0x7f76897f2700] | DtManager            | INFO  | 2018-01-12 12:21:43,131 | Dt Worker Thread Started
[0x7f7709c0eb80] | DbCommon2            | INFO  | 2018-01-12 12:21:43,131 | Loading dblist file: /opt/resolve/configs/.dblist
[0x7f7684fe9700] | IP                   | INFO  | 2018-01-12 12:21:43,131 | Using NVIDIA driver '384.111'
[0x7f7684fe9700] | GPUManager           | INFO  | 2018-01-12 12:21:43,131 | Let There Be CUDA Light!
[0x7f7683fe7700] | GPUManager           | INFO  | 2018-01-12 12:21:43,131 | Initializing GPU board 0 with context thread 0
[0x7f7709c0eb80] | Main                 | INFO  | 2018-01-12 12:21:43,227 | Running DaVinci Resolve v14.2.0.012 (Linux)
[0x7f7709c0eb80] | IO                   | INFO  | 2018-01-12 12:21:43,228 | Using DNxHR library v2.3.3.39r
[0x7f7709c0eb80] | DVIP                 | INFO  | 2018-01-12 12:21:45,963 | DVIP Version : 1.0.1, Revision = 67928 (Release)
[0x7f7709c0eb80] | Fairlight            | INFO  | 2018-01-12 12:21:47,116 | Running Fairlight (r5861-c1d36d89194e698a313f99739ae7ad1255b53545)
[0x7f7683fe7700] | GPUManager           | INFO  | 2018-01-12 12:21:47,294 | Setting channel cache size on GPU board 0 to 4
[0x7f7683fe7700] | GPUManager           | INFO  | 2018-01-12 12:21:47,294 | Board manager 0 on thread 0 initialization done on GPU GeForce GT 740
[0x7f7684fe9700] | GPUManager           | INFO  | 2018-01-12 12:21:47,295 | Finished initializing CUDA board 0 <GeForce GT 740> on platform <Nvidia CUDA GPU> clock rate <1071500> multiprocessor count <2> global mem size (MB) 979, available mem size (MB) 915, shared mem size (KB) 48, on SBM[0|0]
[0x7f7684fe9700] | GPUManager           | INFO  | 2018-01-12 12:21:47,295 | Hired CUDA board 0 <GeForce GT 740>
[0x7f7684fe9700] | GPUManager           | WARN  | 2018-01-12 12:21:47,295 | RED GPU decoding disabled because CUDA version is less than minimum required or total global memory less than 768 MBytes
[0x7f7683fe7700] | GPUManager           | INFO  | 2018-01-12 12:21:47,295 | Entering loop to wait for commands
[0x7f7684fe9700] | GPUManager           | INFO  | 2018-01-12 12:21:47,301 | Let There Be CUDA Light, Done!!
[0x7f7684fe9700] | GPUManager           | INFO  | 2018-01-12 12:21:47,302 | Using CUDA Pinned Memory!
[0x7f7709c0eb80] | UI.ActionConnector   | WARN  | 2018-01-12 12:21:48,241 | Missing ActionDefinition for fileEnableDisableCollaboration
[0x7f7709c0eb80] | UI.ActionConnector   | WARN  | 2018-01-12 12:21:48,254 | Missing ActionDefinition for helpDeactivateLicense
[0x7f7709c0eb80] | UI.ActionConnector   | WARN  | 2018-01-12 12:21:48,255 | Missing ActionDefinition for workspaceRemoteRendering
[0x7f7709c0eb80] | DbCommon2            | INFO  | 2018-01-12 12:21:48,311 | Sm2SysIdEntry is not supported in disk database (xml) mode
[0x7f7709c0eb80] | UI.KeyBindings       | WARN  | 2018-01-12 12:21:48,843 | Binding 'Alt+Shift+T' for unknown action fileCollaborationPublish
[0x7f7709c0eb80] | UI.KeyBindings       | WARN  | 2018-01-12 12:21:48,843 | Binding 'Ctrl+Shift+T' for unknown action fileCollaborationPublishSelected
[0x7f7709c0eb80] | UI.KeyBindings       | WARN  | 2018-01-12 12:21:48,843 | Binding 'Alt+Shift+U' for unknown action fileCollaborationUpdate
[0x7f7709c0eb80] | UI.KeyBindings       | WARN  | 2018-01-12 12:21:48,844 | Binding 'Ctrl+Shift+U' for unknown action fileCollaborationUpdateSelected
[0x7f7709c0eb80] | UI.KeyBindings       | WARN  | 2018-01-12 12:21:48,856 | Binding 'Ctrl+G' for unknown action workspaceRemoteGrading
[0x7f7709c0eb80] | UI.KeyBindings       | WARN  | 2018-01-12 12:21:48,881 | :/Application/Keyboard/bindings-resolve9.txt: Key sequence Shift+C defined by clipShowCurveEditor and trimSelectAudioEditPoint
[0x7f7709c0eb80] | UI.KeyBindings       | WARN  | 2018-01-12 12:21:48,881 | :/Application/Keyboard/bindings-resolve9.txt: Key sequence Ctrl+Shift+. defined by editNudgeSwapEditForward and viewStereoSwitchEyeRight
[0x7f7709c0eb80] | UI.KeyBindings       | WARN  | 2018-01-12 12:21:48,881 | :/Application/Keyboard/bindings-resolve9.txt: Key sequence Ctrl+Shift+, defined by viewStereoSwitchEyeLeft and editNudgeSwapEditReverse
[0x7f7709c0eb80] | UI.KeyBindings       | WARN  | 2018-01-12 12:21:48,882 | After merging custom hotkeys: Key sequence Right defined by fairlightActionsJumpRight and controlStepForward
[0x7f7709c0eb80] | UI.KeyBindings       | WARN  | 2018-01-12 12:21:48,882 | After merging custom hotkeys: Key sequence Down defined by fairlightActionsPanTracksDown and controlClipNext
[0x7f7709c0eb80] | UI.KeyBindings       | WARN  | 2018-01-12 12:21:48,882 | After merging custom hotkeys: Key sequence Shift+C defined by clipShowCurveEditor and trimSelectAudioEditPoint
[0x7f7709c0eb80] | UI.KeyBindings       | WARN  | 2018-01-12 12:21:48,883 | After merging custom hotkeys: Key sequence Up defined by fairlightActionsPanTracksUp and controlClipPrev
[0x7f7709c0eb80] | UI.KeyBindings       | WARN  | 2018-01-12 12:21:48,883 | After merging custom hotkeys: Key sequence Ctrl+Shift+. defined by editNudgeSwapEditForward and viewStereoSwitchEyeRight
[0x7f7709c0eb80] | UI.KeyBindings       | WARN  | 2018-01-12 12:21:48,883 | After merging custom hotkeys: Key sequence Left defined by controlStepReverse and fairlightActionsJumpLeft
[0x7f7709c0eb80] | UI.KeyBindings       | WARN  | 2018-01-12 12:21:48,883 | After merging custom hotkeys: Key sequence Ctrl+Shift+, defined by viewStereoSwitchEyeLeft and editNudgeSwapEditReverse
[0x7f7709c0eb80] | UI                   | WARN  | 2018-01-12 12:21:49,300 | Failed to load media metadata preset list or the list is empty.
[0x7f7709c0eb80] | UI                   | WARN  | 2018-01-12 12:21:49,311 | Failed to load media metadata preset list or the list is empty.
[0x7f83d9d79b80] | Undefined            | INFO  | 2018-01-12 13:05:05,408 | --------------------------------------------------------------------------------
[0x7f83d9d79b80] | Undefined            | INFO  | 2018-01-12 13:05:05,408 | Loaded log config from /opt/resolve/configs/log-conf.xml
[0x7f83d9d79b80] | Undefined            | INFO  | 2018-01-12 13:05:05,408 | --------------------------------------------------------------------------------
[0x7f83d9d79b80] | Main                 | INFO  | 2018-01-12 13:05:05,534 | Updating display GPU information...
[0x7f83d9d79b80] | Main                 | INFO  | 2018-01-12 13:05:05,564 | Detecting Main Display properties
[0x7f83d9d79b80] | Main                 | INFO  | 2018-01-12 13:05:05,570 | Process to detect main display has finished
[0x7f83d9d79b80] | Main                 | INFO  | 2018-01-12 13:05:05,578 | Fallback process to detect main display has finished
[0x7f83d9d79b80] | Main                 | INFO  | 2018-01-12 13:05:05,578 | GPU Name = 'NVIDIA GeForce GT 740', Main display = 1
[0x7f83d9d79b80] | Main                 | INFO  | 2018-01-12 13:05:05,588 | Only 1 NVIDIA display GPU found. Using CUDA for processing.
[0x7f83d9d79b80] | Main                 | INFO  | 2018-01-12 13:05:05,588 | Setting LsManager.3.NumGPUs = 1
[0x7f83d9d79b80] | Main                 | INFO  | 2018-01-12 13:05:05,588 | Setting LsManager.3.DisplayGPUName = NVIDIA GeForce GT 740
[0x7f83d9d79b80] | Main                 | INFO  | 2018-01-12 13:05:05,588 | Setting LsManager.3.DisplayGPUIndex = 0
[0x7f83d9d79b80] | Main                 | INFO  | 2018-01-12 13:05:05,588 | Setting LsManager.3.DisplayGPUBusID = 1
[0x7f83d9d79b80] | IO                   | INFO  | 2018-01-12 13:05:05,588 | RED InitializeSdk with library path at /opt/resolve/libs
[0x7f83d9d79b80] | IO                   | INFO  | 2018-01-12 13:05:05,595 | R3DAPI 7.0.5-35I50 (20171120 L64S) R3DSDK 7.0.5-35I50 (20171120 L64D) RED CUDA 7.0.5-44406 (20171117) RED OPENCL 7.0.5-44406 (20171117) [/opt/resolve/libs/] init is successful
[0x7f83d9d79b80] | Main                 | INFO  | 2018-01-12 13:05:05,595 | Decklink model name: '', version: ''
[0x7f83d9d79b80] | Main                 | INFO  | 2018-01-12 13:05:05,598 | Installed custom font: Open Sans
[0x7f83d9d79b80] | Main                 | INFO  | 2018-01-12 13:05:05,600 | Installed custom font: Open Sans
[0x7f83d9d79b80] | Main                 | INFO  | 2018-01-12 13:05:05,626 | Finished loading Application style sheet
[0x7f838f05b700] | LeManager            | INFO  | 2018-01-12 13:05:05,718 | 521, 38
[0x7f83d9d79b80] | BtCommon             | INFO  | 2018-01-12 13:05:06,193 | Memory config: reserved=6000M pinned=4000M log=0
[0x7f83d9d79b80] | BtCommon             | INFO  | 2018-01-12 13:05:06,194 | Using default pooled memory manager
[0x7f83d9d79b80] | BtCommon             | INFO  | 2018-01-12 13:05:06,194 | Daemon DPDecoder is started 4307
[0x7f83d9d79b80] | BtCommon             | INFO  | 2018-01-12 13:05:06,194 | Daemon DPDecoder is started 4308
[0x7f83d9d79b80] | BtCommon             | INFO  | 2018-01-12 13:05:06,197 | Daemon DPDecoder is started 4309
[0x7f83d9d79b80] | BtCommon             | INFO  | 2018-01-12 13:05:06,198 | Daemon DPDecoder is started 4310
[0x7f83d9d79b80] | BtCommon             | INFO  | 2018-01-12 13:05:06,201 | Daemon DPDecoder is started 4311
[0x7f83d9d79b80] | BtCommon             | INFO  | 2018-01-12 13:05:06,201 | Daemon DPDecoder is started 4312
[0x7f83d9d79b80] | BtCommon             | INFO  | 2018-01-12 13:05:06,204 | Daemon DPDecoder is started 4313
[0x7f83d9d79b80] | BtCommon             | INFO  | 2018-01-12 13:05:06,204 | Daemon DPDecoder is started 4314
[0x7f83d9d79b80] | SyManager            | INFO  | 2018-01-12 13:05:06,217 | Total: 20, NumDtThreads: 8, NumComms: 0, NumSites: 1

[0x7f83d9d79b80] | SyManager            | INFO  | 2018-01-12 13:05:06,217 | Lookaheads -> playback = 20, record = 20, stop = 2

[0x7f83d9d79b80] | DtManager            | INFO  | 2018-01-12 13:05:06,218 | Using 8 generic IO threads
[0x7f83d9d79b80] | DtManager            | INFO  | 2018-01-12 13:05:06,218 | Total of 16 IO threads (including 8 generic and 8 Red decode threads)
[0x7f83797ea700] | DtManager            | INFO  | 2018-01-12 13:05:06,219 | Dt Worker Thread Started
[0x7f837f7f6700] | DtManager            | INFO  | 2018-01-12 13:05:06,219 | Dt Data Handler Thread Started
[0x7f8378fe9700] | DtManager            | INFO  | 2018-01-12 13:05:06,220 | Dt Worker Thread Started
[0x7f83787e8700] | DtManager            | INFO  | 2018-01-12 13:05:06,220 | Dt Worker Thread Started
[0x7f83d9d79b80] | DbCommon2            | INFO  | 2018-01-12 13:05:06,221 | Loading dblist file: /opt/resolve/configs/.dblist
[0x7f837c7f0700] | DtManager            | INFO  | 2018-01-12 13:05:06,221 | Dt Worker Thread Started
[0x7f83777e6700] | DtManager            | INFO  | 2018-01-12 13:05:06,221 | Dt Worker Thread Started
[0x7f8376fe5700] | DtManager            | INFO  | 2018-01-12 13:05:06,221 | Dt Worker Thread Started
[0x7f8377fe7700] | DtManager            | INFO  | 2018-01-12 13:05:06,221 | Dt Worker Thread Started
[0x7f837b7ee700] | DtManager            | INFO  | 2018-01-12 13:05:06,221 | Dt Worker Thread Started
[0x7f837afed700] | DtManager            | INFO  | 2018-01-12 13:05:06,221 | Dt Worker Thread Started
[0x7f8379feb700] | DtManager            | INFO  | 2018-01-12 13:05:06,221 | Dt Worker Thread Started
[0x7f837bfef700] | DtManager            | INFO  | 2018-01-12 13:05:06,221 | Dt Worker Thread Started
[0x7f837dff3700] | DtManager            | INFO  | 2018-01-12 13:05:06,221 | Dt Worker Thread Started
[0x7f8381ffb700] | GsManager            | INFO  | 2018-01-12 13:05:06,221 | Gs Processor Thread ----- (140202798462720)

[0x7f837eff5700] | DtManager            | INFO  | 2018-01-12 13:05:06,221 | Dt Worker Thread Started
[0x7f837e7f4700] | DtManager            | INFO  | 2018-01-12 13:05:06,221 | Dt Worker Thread Started
[0x7f837cff1700] | DtManager            | INFO  | 2018-01-12 13:05:06,221 | Dt Worker Thread Started
[0x7f837a7ec700] | DtManager            | INFO  | 2018-01-12 13:05:06,222 | Dt Worker Thread Started
[0x7f837d7f2700] | DtManager            | INFO  | 2018-01-12 13:05:06,222 | Dt Worker Thread Started
[0x7f83d9d79b80] | Main                 | INFO  | 2018-01-12 13:05:06,222 | Running DaVinci Resolve v14.2.0.012 (Linux)
[0x7f83837fe700] | SyManager            | ERROR | 2018-01-12 13:05:06,222 | Failed to connect to panel socket
[0x7f83837fe700] | SyManager            | ERROR | 2018-01-12 13:05:06,222 | DRIVER: open /var/tmp/davinci_socket failed
[0x7f83837fe700] | SyManager            | ERROR | 2018-01-12 13:05:06,223 | Failed to connect to panel socket
[0x7f8355ffb700] | IP                   | INFO  | 2018-01-12 13:05:06,224 | Using NVIDIA driver '384.111'
[0x7f8355ffb700] | GPUManager           | INFO  | 2018-01-12 13:05:06,224 | Let There Be CUDA Light!
[0x7f8354ff9700] | GPUManager           | INFO  | 2018-01-12 13:05:06,224 | Initializing GPU board 0 with context thread 0
[0x7f83d9d79b80] | IO                   | INFO  | 2018-01-12 13:05:06,246 | Using DNxHR library v2.3.3.39r
[0x7f8354ff9700] | GPUManager           | INFO  | 2018-01-12 13:05:06,378 | Setting channel cache size on GPU board 0 to 4
[0x7f8354ff9700] | GPUManager           | INFO  | 2018-01-12 13:05:06,378 | Board manager 0 on thread 0 initialization done on GPU GeForce GT 740
[0x7f8354ff9700] | GPUManager           | INFO  | 2018-01-12 13:05:06,379 | Entering loop to wait for commands
[0x7f8355ffb700] | GPUManager           | INFO  | 2018-01-12 13:05:06,379 | Finished initializing CUDA board 0 <GeForce GT 740> on platform <Nvidia CUDA GPU> clock rate <1071500> multiprocessor count <2> global mem size (MB) 979, available mem size (MB) 919, shared mem size (KB) 48, on SBM[0|0]
[0x7f8355ffb700] | GPUManager           | INFO  | 2018-01-12 13:05:06,379 | Hired CUDA board 0 <GeForce GT 740>
[0x7f8355ffb700] | GPUManager           | WARN  | 2018-01-12 13:05:06,379 | RED GPU decoding disabled because CUDA version is less than minimum required or total global memory less than 768 MBytes
[0x7f8355ffb700] | GPUManager           | INFO  | 2018-01-12 13:05:06,385 | Let There Be CUDA Light, Done!!
[0x7f8355ffb700] | GPUManager           | INFO  | 2018-01-12 13:05:06,385 | Using CUDA Pinned Memory!
[0x7f83d9d79b80] | DVIP                 | INFO  | 2018-01-12 13:05:08,300 | DVIP Version : 1.0.1, Revision = 67928 (Release)
[0x7f83d9d79b80] | Fairlight            | INFO  | 2018-01-12 13:05:08,651 | Running Fairlight (r5861-c1d36d89194e698a313f99739ae7ad1255b53545)
[0x7f83d9d79b80] | UI.ActionConnector   | WARN  | 2018-01-12 13:05:09,078 | Missing ActionDefinition for fileEnableDisableCollaboration
[0x7f83d9d79b80] | UI.ActionConnector   | WARN  | 2018-01-12 13:05:09,090 | Missing ActionDefinition for helpDeactivateLicense
[0x7f83d9d79b80] | UI.ActionConnector   | WARN  | 2018-01-12 13:05:09,090 | Missing ActionDefinition for workspaceRemoteRendering
[0x7f83d9d79b80] | DbCommon2            | INFO  | 2018-01-12 13:05:09,096 | Sm2SysIdEntry is not supported in disk database (xml) mode
[0x7f83d9d79b80] | UI.KeyBindings       | WARN  | 2018-01-12 13:05:09,579 | Binding 'Alt+Shift+T' for unknown action fileCollaborationPublish
[0x7f83d9d79b80] | UI.KeyBindings       | WARN  | 2018-01-12 13:05:09,580 | Binding 'Ctrl+Shift+T' for unknown action fileCollaborationPublishSelected
[0x7f83d9d79b80] | UI.KeyBindings       | WARN  | 2018-01-12 13:05:09,580 | Binding 'Alt+Shift+U' for unknown action fileCollaborationUpdate
[0x7f83d9d79b80] | UI.KeyBindings       | WARN  | 2018-01-12 13:05:09,580 | Binding 'Ctrl+Shift+U' for unknown action fileCollaborationUpdateSelected
[0x7f83d9d79b80] | UI.KeyBindings       | WARN  | 2018-01-12 13:05:09,592 | Binding 'Ctrl+G' for unknown action workspaceRemoteGrading
[0x7f83d9d79b80] | UI.KeyBindings       | WARN  | 2018-01-12 13:05:09,618 | :/Application/Keyboard/bindings-resolve9.txt: Key sequence Ctrl+Shift+. defined by viewStereoSwitchEyeRight and editNudgeSwapEditForward
[0x7f83d9d79b80] | UI.KeyBindings       | WARN  | 2018-01-12 13:05:09,618 | :/Application/Keyboard/bindings-resolve9.txt: Key sequence Ctrl+Shift+, defined by viewStereoSwitchEyeLeft and editNudgeSwapEditReverse
[0x7f83d9d79b80] | UI.KeyBindings       | WARN  | 2018-01-12 13:05:09,618 | :/Application/Keyboard/bindings-resolve9.txt: Key sequence Shift+C defined by trimSelectAudioEditPoint and clipShowCurveEditor
[0x7f83d9d79b80] | UI.KeyBindings       | WARN  | 2018-01-12 13:05:09,619 | After merging custom hotkeys: Key sequence Ctrl+Shift+. defined by viewStereoSwitchEyeRight and editNudgeSwapEditForward
[0x7f83d9d79b80] | UI.KeyBindings       | WARN  | 2018-01-12 13:05:09,619 | After merging custom hotkeys: Key sequence Left defined by controlStepReverse and fairlightActionsJumpLeft
[0x7f83d9d79b80] | UI.KeyBindings       | WARN  | 2018-01-12 13:05:09,619 | After merging custom hotkeys: Key sequence Ctrl+Shift+, defined by viewStereoSwitchEyeLeft and editNudgeSwapEditReverse
[0x7f83d9d79b80] | UI.KeyBindings       | WARN  | 2018-01-12 13:05:09,619 | After merging custom hotkeys: Key sequence Right defined by fairlightActionsJumpRight and controlStepForward
[0x7f83d9d79b80] | UI.KeyBindings       | WARN  | 2018-01-12 13:05:09,619 | After merging custom hotkeys: Key sequence Shift+C defined by trimSelectAudioEditPoint and clipShowCurveEditor
[0x7f83d9d79b80] | UI.KeyBindings       | WARN  | 2018-01-12 13:05:09,620 | After merging custom hotkeys: Key sequence Down defined by fairlightActionsPanTracksDown and controlClipNext
[0x7f83d9d79b80] | UI.KeyBindings       | WARN  | 2018-01-12 13:05:09,620 | After merging custom hotkeys: Key sequence Up defined by fairlightActionsPanTracksUp and controlClipPrev
[0x7f83d9d79b80] | UI                   | WARN  | 2018-01-12 13:05:09,947 | Failed to load media metadata preset list or the list is empty.
[0x7f83d9d79b80] | UI                   | WARN  | 2018-01-12 13:05:09,958 | Failed to load media metadata preset list or the list is empty.
[0x7f9cc7b0fb80] | Undefined            | INFO  | 2018-01-12 14:26:11,208 | --------------------------------------------------------------------------------
[0x7f9cc7b0fb80] | Undefined            | INFO  | 2018-01-12 14:26:11,226 | Loaded log config from /opt/resolve/configs/log-conf.xml
[0x7f9cc7b0fb80] | Undefined            | INFO  | 2018-01-12 14:26:11,226 | --------------------------------------------------------------------------------
[0x7f9cc7b0fb80] | Main                 | INFO  | 2018-01-12 14:26:11,790 | Updating display GPU information...
[0x7fc28773fb80] | Undefined            | INFO  | 2018-01-12 14:26:37,349 | --------------------------------------------------------------------------------
[0x7fc28773fb80] | Undefined            | INFO  | 2018-01-12 14:26:37,349 | Loaded log config from /opt/resolve/configs/log-conf.xml
[0x7fc28773fb80] | Undefined            | INFO  | 2018-01-12 14:26:37,349 | --------------------------------------------------------------------------------
[0x7fc28773fb80] | Main                 | INFO  | 2018-01-12 14:26:37,393 | Updating display GPU information...
[0x7f1e6cfd7b80] | Undefined            | INFO  | 2018-01-12 14:26:56,469 | --------------------------------------------------------------------------------
[0x7f1e6cfd7b80] | Undefined            | INFO  | 2018-01-12 14:26:56,469 | Loaded log config from /opt/resolve/configs/log-conf.xml
[0x7f1e6cfd7b80] | Undefined            | INFO  | 2018-01-12 14:26:56,470 | --------------------------------------------------------------------------------
[0x7f1e6cfd7b80] | Main                 | INFO  | 2018-01-12 14:26:57,037 | Updating display GPU information...
[0x7fec7faa7b80] | Undefined            | INFO  | 2018-01-12 15:42:29,736 | --------------------------------------------------------------------------------
[0x7fec7faa7b80] | Undefined            | INFO  | 2018-01-12 15:42:29,736 | Loaded log config from /opt/resolve/configs/log-conf.xml
[0x7fec7faa7b80] | Undefined            | INFO  | 2018-01-12 15:42:29,736 | --------------------------------------------------------------------------------
[0x7fec7faa7b80] | Main                 | INFO  | 2018-01-12 15:42:29,862 | Updating display GPU information...
[0x7f480468ab80] | Undefined            | INFO  | 2018-01-12 15:52:45,469 | --------------------------------------------------------------------------------
[0x7f480468ab80] | Undefined            | INFO  | 2018-01-12 15:52:45,469 | Loaded log config from /opt/resolve/configs/log-conf.xml
[0x7f480468ab80] | Undefined            | INFO  | 2018-01-12 15:52:45,470 | --------------------------------------------------------------------------------
[0x7f480468ab80] | Main                 | INFO  | 2018-01-12 15:52:45,601 | Updating display GPU information...
[0x7f9b44b04b80] | Undefined            | INFO  | 2018-01-12 16:15:44,979 | --------------------------------------------------------------------------------
[0x7f9b44b04b80] | Undefined            | INFO  | 2018-01-12 16:15:45,007 | Loaded log config from /opt/resolve/configs/log-conf.xml
[0x7f9b44b04b80] | Undefined            | INFO  | 2018-01-12 16:15:45,007 | --------------------------------------------------------------------------------
[0x7f9b44b04b80] | Main                 | INFO  | 2018-01-12 16:15:45,727 | Updating display GPU information...
[0x7f1d1540ab80] | Undefined            | INFO  | 2018-01-12 16:15:57,146 | --------------------------------------------------------------------------------
[0x7f1d1540ab80] | Undefined            | INFO  | 2018-01-12 16:15:57,146 | Loaded log config from /opt/resolve/configs/log-conf.xml
[0x7f1d1540ab80] | Undefined            | INFO  | 2018-01-12 16:15:57,146 | --------------------------------------------------------------------------------
[0x7f1d1540ab80] | Main                 | INFO  | 2018-01-12 16:15:57,290 | Updating display GPU information...
[0x7f6a9a08fb80] | Undefined            | INFO  | 2018-01-12 17:48:13,339 | --------------------------------------------------------------------------------
[0x7f6a9a08fb80] | Undefined            | INFO  | 2018-01-12 17:48:13,339 | Loaded log config from /opt/resolve/configs/log-conf.xml
[0x7f6a9a08fb80] | Undefined            | INFO  | 2018-01-12 17:48:13,339 | --------------------------------------------------------------------------------
[0x7f6a9a08fb80] | Main                 | INFO  | 2018-01-12 17:48:13,471 | Updating display GPU information...


and ResolveDebug gives me
Code: Select all
/usr/share/themes/Lubuntu-dark-panel/gtk-2.0/gtkrc:682: Unable to find include file: "apps/xfce4-notifyd.rc"
[0x7f1d1540ab80] | Main                 | INFO  | 2018-01-12 16:15:57,290 | Updating display GPU information...
OpenCL error -1001.
terminate called after throwing an instance of 'ReactorGPU::GPUException'


Some required information is missing for email crash report, the crash archive will not be updated


==========[CRASH DUMP]========
Please send this to support:
#TIME Fri Jan 12 16:15:57 2018 - Uptime 00:00:00 (hh:mm:ss)
#FROM_EMAIL
#TO_EMAIL
#VERSION 14.2 (#012)
#SMTP_SERVER
#PROGRAM_NAME (64-bit)

/opt/resolve/bin/resolve(_ZN7BtDebug14ReportSegfaultEiP7siginfoPv+0x44)[0x3c5f764]
/lib/x86_64-linux-gnu/libc.so.6(gsignal+0xcb)[0x7f1cfce2f0bb]
/lib/x86_64-linux-gnu/libc.so.6(gsignal+0xcb)[0x7f1cfce2f0bb]
/lib/x86_64-linux-gnu/libc.so.6(abort+0x16d)[0x7f1cfce30f5d]
/usr/lib/x86_64-linux-gnu/libstdc++.so.6(_ZN9__gnu_cxx27__verbose_terminate_handlerEv+0x135)[0x7f1cfd481095]
/usr/lib/x86_64-linux-gnu/libstdc++.so.6(+0x8fc86)[0x7f1cfd47ec86]
/usr/lib/x86_64-linux-gnu/libstdc++.so.6(+0x8fcd1)[0x7f1cfd47ecd1]
/usr/lib/x86_64-linux-gnu/libstdc++.so.6(+0x8ff14)[0x7f1cfd47ef14]
/opt/resolve/bin/resolve[0x74f4d3]
/opt/resolve/bin/resolve[0x74dd06]
/opt/resolve/bin/resolve[0x747fec]
/opt/resolve/bin/resolve[0x710b3f]
/opt/resolve/bin/resolve[0x717df3]
/opt/resolve/bin/resolve[0x718ef9]
/opt/resolve/bin/resolve[0x719298]
/opt/resolve/bin/resolve[0xcfa2a0]
/opt/resolve/bin/resolve[0xcfb7ab]
/opt/resolve/bin/resolve[0x71e1a2]
/opt/resolve/bin/resolve[0x71ef90]
/opt/resolve/bin/resolve(main+0x4d8)[0x700e98]
/lib/x86_64-linux-gnu/libc.so.6(__libc_start_main+0xf1)[0x7f1cfce191c1]
/opt/resolve/bin/resolve[0x6ffc09]
Signal Number = 6
==============================


Any help to get me able to open the app would be much appreciated.

cheers. mikey
Offline

John Morris

  • Posts: 46
  • Joined: Mon Jul 31, 2017 12:44 am

Re: DaVinci Resolve on Linux - Install issues

PostSat Jan 13, 2018 1:50 pm

Mikey Yeah wrote:Hi all. previous user of resolve on win 7, and now 10 but looking to have a 2nd system at home to use as well as my workstation for basic edits etc. its a lowly box without too good a spec but im hoping itll be good enough just a lil slow. currently running Core2Duo 6600 @ 2.4ghz, 4gb ram (very low i know), nvidia GT740 with 1gb DDR5 vram.
...
Any help to get me able to open the app would be much appreciated.

cheers. mikey

I'm afraid the GT740 only having 1GB vram is going to be the problem at least. Resolve does work on my GT750Ti with 2GB vram for the relatively simple things I do. Probably the 4GB system ram is also not enough. You could set up a swap disk but it would be very slow.
NVIDIA 750Ti 2GB
NVIDIA driver version 390.77
DeckLink Mini Monitor 4K
32G system memory
Resolve 15.0.1.003 1 GPU, free version
Linux Mint 18.3
Offline
User avatar

Noel Sterrett

  • Posts: 316
  • Joined: Wed Aug 22, 2012 9:12 pm

Re: DaVinci Resolve on Linux - Install issues

PostSat Jan 13, 2018 2:34 pm

I'm trying to use a MIDI Audio Console. I checked the 'Use MIDI Audio Console' box under Preferences but only get 'None' under MIDI Input and MIDI Output even though there are several MIDI ports:
Code: Select all
$ aplaymidi -l

Port    Client name                      Port name
 14:0    Midi Through                     Midi Through Port-0
 28:0    USB Uno MIDI Interface           USB Uno MIDI Interface MIDI 1
 32:0    Yamaha MOXF6/MOXF8               Yamaha MOXF6/MOXF8 MIDI 1
 32:1    Yamaha MOXF6/MOXF8               Yamaha MOXF6/MOXF8 MIDI 2
 32:2    Yamaha MOXF6/MOXF8               Yamaha MOXF6/MOXF8 MIDI 3
 32:3    Yamaha MOXF6/MOXF8               Yamaha MOXF6/MOXF8 MIDI 4
 32:4    Yamaha MOXF6/MOXF8               Yamaha MOXF6/MOXF8 MIDI 5

I'm worried that this is similar to the lack of system audio. Hopefully not.

Anyone had better luck?

Cheers.
Admit One Pictures
Ubuntu 18.04 | Asus Z10 Xeon*2 32G | GTX 1080 8G | Resolve Studio 15b3 | Desktop Video 10.9.11
Offline
User avatar

Noel Sterrett

  • Posts: 316
  • Joined: Wed Aug 22, 2012 9:12 pm

Re: DaVinci Resolve on Linux - Install issues

PostMon Jan 15, 2018 11:49 pm

I've tried Ubuntu 16.04 and now also 17.10 with Resolve 14.2. Both work and are fine with the Decklink card. Neither work with the Mini Panel. The Mini Panel works with CentOS 7.4.

Ubuntu 16.04/17.10 panel.log:
Code: Select all
opened log file
Failed to create listener
Unsupported DaVinci Panel API Version (0.0), please update
Resolve discovery

CentOS 7.4 panel.log:
Code: Select all
opened log file
*** WARNING *** The program 'DaVinciPanelDaemon' uses the Apple Bonjour compatibility layer of Avahi.
*** WARNING *** Please fix your application to use the native API of Avahi!
*** WARNING *** For more information see <http://0pointer.de/avahi-compat?s=libdns_sd&e=DaVinciPanelDaemon>
DaVinci Panel API Version: 1.0
Panel arrived
DVPB panel: Mini Panel
Panel arrived
DVPB panel: Mini Panel
Resolve discovery
DVPB panel: Mini Panel
Resolve discovery
DVPB panel: Mini Panel
Connected (USB_ID)
Anyone have any suggestions?

Cheers.

SOLVED: need to 'md /usr/lib64' prior to installing Resolve
Last edited by Noel Sterrett on Wed Jan 17, 2018 4:36 pm, edited 1 time in total.
Admit One Pictures
Ubuntu 18.04 | Asus Z10 Xeon*2 32G | GTX 1080 8G | Resolve Studio 15b3 | Desktop Video 10.9.11
Offline
User avatar

Marc Gasser

  • Posts: 58
  • Joined: Tue Feb 07, 2017 8:14 pm

Re: DaVinci Resolve on Linux - Install issues

PostTue Jan 16, 2018 2:06 pm

@Tero Ahlfors: For the moment I have to extract audio for DaVinci as well as for Fusion. I just think it would be nice to save this extra effort just with supporting compressed audio (mp3 is opensource and should be easy to be decoded in Resolve, in Fusion they could even implement a script which extracts audio in the background and loads it as separate file).

@Noel Sterrett: Installed midisport-firmware, tested if midi is working with midisnoop.
Under preferences in DaVinci I can nowhere find anything relate to midi and midi remote. Even on google there stands nothing that you can control DaVinci with a midi controller. So I guess no midi support. But nice idea, would be amazing!
[code][/code]Xubuntu 16.04, 2x Intel Xeon Six Core, Nvidia GeForce 960 4GB, Nvidia 396 proprietary driver, 96 Gb Ram.

https://www.pocketvj.com
Offline

Martin Schitter

  • Posts: 787
  • Joined: Tue Apr 28, 2015 10:41 pm

Re: DaVinci Resolve on Linux - Install issues

PostWed Jan 17, 2018 6:18 pm

Noel Sterrett wrote:SOLVED: need to 'md /usr/lib64' prior to installing Resolve


you definitely shouldn't do that on a debian/ubuntu/mint system!
it will break multiarch support!
see: https://wiki.debian.org/Multiarch
Offline
User avatar

Noel Sterrett

  • Posts: 316
  • Joined: Wed Aug 22, 2012 9:12 pm

Re: DaVinci Resolve on Linux - Install issues

PostWed Jan 17, 2018 9:42 pm

Martin Schitter wrote:
Noel Sterrett wrote:SOLVED: need to 'md /usr/lib64' prior to installing Resolve


you definitely shouldn't do that on a debian/ubuntu/mint system!
it will break multiarch support!
see: https://wiki.debian.org/Multiarch
Too late!

Resolve tries to install the Mini Panel code to /usr/lib64. If it's not there, the panel won't work. So for now, it's one or the other, and the panel wins.

Cheers.
Admit One Pictures
Ubuntu 18.04 | Asus Z10 Xeon*2 32G | GTX 1080 8G | Resolve Studio 15b3 | Desktop Video 10.9.11
Offline

Victor van Herpt

  • Posts: 2
  • Joined: Wed Jan 10, 2018 7:08 am

Re: DaVinci Resolve on Linux - Install issues

PostThu Jan 18, 2018 7:40 am

I have been trying Davinci Resolve in Arch Linux, thanks to the very helpful PKGBUILD https://aur.archlinux.org/packages/davinci-resolve/

I am having troubles getting the studio version to work though (I bought a dongle specifically for this, after testing the studio version :) ). It does start, but I cant get the dongle to be detected. Has anyone experienced issues or success with the dongle outside the "supported" CentOS distribution?

This is what I'm getting in the system log (dmesg):
Code: Select all
[297004.276794] usb 1-11: USB disconnect, device number 19
[297006.071371] usb 1-11: new low-speed USB device number 20 using xhci_hcd
[297006.217278] usbhid 1-11:1.0: couldn't find an input interrupt endpoint

This is how it's detected by lsusb:
Code: Select all
Bus 001 Device 020: ID 096e:0201 Feitian Technologies, Inc.

Is there any specific driver that should be loaded in the kernel in order to get it to work?
Offline

Victor van Herpt

  • Posts: 2
  • Joined: Wed Jan 10, 2018 7:08 am

Re: DaVinci Resolve on Linux - Install issues

PostThu Jan 18, 2018 10:15 am

Actually (answering my previous post, which hasn't been aproved yet :lol: ). If you install in Arch Linux through the AUR package (for the non-studio version) the UDEV rules will not be created so that the USB device has 0666 permissions.

A new file in /lib/udev/rules.d/75-sdx.rules has to be created, with the following contents:
Code: Select all
SUBSYSTEM=="usb", ENV{DEVTYPE}=="usb_device", ATTRS{idVendor}=="096e", MODE="0666"


Now it's working great! I wanted to support a company that provides a linux application, I'm waiting for my Studio card in order to have audio output for now! (quite an investment for an amateur editor :lol: )

PS: i uploaded the PKGBUILD to github, you can install davinci resolve studio in archlinux by cloning or downloading the repository, running 'makepkg' inside the repo dir (it should be named davinci-resolve-studio), and then, as root, run 'pacman -U davinci-resolve-studio-14.2.tar.xz'.
https://github.com/codibit/davinci-resolve-studio
Offline

bjornzitting

  • Posts: 13
  • Joined: Tue Jan 23, 2018 5:09 pm
  • Real Name: Bjorn Zitting

Re: DaVinci Resolve on Linux - Install issues

PostTue Jan 23, 2018 5:26 pm

DaVinci Resolve Linux struggle and sort of success

Background:

I have a iMac 5k with DaVinci Resolve Studio 14.2.0, 'everything' works but a bit weak on 4k material

Ambition:
Build a powerful Linux video workstation to get more performance, but still keep the iMac for initial work

I now have a AMD Threadripper with GPU 1080 ti running the Black Magic configured CentOS image installed on one disk
DaVinci Resolve Studio 14.2.0
Desktop Video 10.9.10
Have been struggling with video and sound output, I've followed the discussions on this great forum, so was prepared for more issues on Linux (I have many years experience with Linux)
---
To get DaVinci Resolve to work was easy with the BMD CentOS (struggled earlier with 14 beta and 12.x versions/plain CentOS on other hardware fighting NVidia drivers, missing libs etc)

I've now upgraded DaVinci and Desktop Video without problems several times

---

But, the Ultra Studio mini monitor via TB2/TB3 adapter didn't work, the Intensity shuttle via USB didn't work (both work on iMac and a MacBook Pro with High Sierra/earlier Sierra)
I bought a Decklink Mini monitor 4k PCI and got HDMI video to work on a 1080p TV I have mounted above the computers - but no sound!

At the same time I bought a Video Assist 4K with normal size SDI in/out, when I connected it via HDMI no sound, but SDI from Decklink Mini monitor 4k PCI showed sound and a headphone gave fine quality sound!
Thought of ordering another box for SDI -> HDMI but took a chance and connected the HDMI out on Video Assist to the TV, IT WORKED! (Is this conversion feature documented?)
Then connected a cheap HDMI -> HDMI box with sound breakout and got optical sound to a Pioneer surround receiver :)

It looks very odd with all the cables and boxes, and on top of that I had to convert a sound file to AIFF to get it accepted (Original format was accepted directly on the Mac)

---
Yesterday evening I succeded in editing two 4k video clips (one Log2 with a LUT to rec 709) and a couple of extra sound tracks, monitoring video and sound on external TV/amplifier and downscaling to 1080P
The rendering was so fast :)

Now focus on finalising Bios setup, modify disk installs etc, maybe switch to other Linux dist, and then integrate machines via a Postgres SQL DB
---

First a BIG THANK YOU for building DaVinci Resolve for Linux, I believe it will be the most effective and stable platform performance wise!

But please inform us about the limitations!

I've seen on the forum how many spent a lot of time trying things BMD knows don't work
Also please inform in the user interface what's not implemented yet (system sound on linux is a 'good' example...) and in the free version what requires the Studio license

I'm so impressed with the high quality and helpful attitude on the forum, I think most people see value in following it

Thank you
Björn Zitting
Offline

Fernando Sousa

  • Posts: 11
  • Joined: Sun Feb 05, 2017 8:53 am

Re: DaVinci Resolve on Linux - Install issues

PostTue Jan 23, 2018 8:13 pm

Would a Decklink Studio 4k enable sound in Linux? I found one used for only a month for a price I totally can afford, just want confirmation that this does the trick before I shell the cash for it.
Offline
User avatar

David Franzo

  • Posts: 192
  • Joined: Wed Jun 26, 2013 4:08 am
  • Location: New York

Re: DaVinci Resolve on Linux - Install issues

PostTue Jan 23, 2018 9:00 pm

Fernando Sousa wrote:Would a Decklink Studio 4k enable sound in Linux?

Yes. We use this on our CentOS system and it works fine. The AES audio is in perfect sync with the SDI video.
Offline

Fernando Sousa

  • Posts: 11
  • Joined: Sun Feb 05, 2017 8:53 am

Re: DaVinci Resolve on Linux - Install issues

PostWed Jan 24, 2018 12:51 am

What about HDMI audio? Have you tested?
Offline

Iñigo Figuero

  • Posts: 45
  • Joined: Mon Sep 04, 2017 9:55 am

Re: DaVinci Resolve on Linux - Install issues

PostWed Jan 24, 2018 6:47 am

Stuart Jackson wrote:I've managed to install Resolve on a Debian distribution and all the dependent libraries. But when I go to start Resolve (either 12.5.5 or 14.0b1) I get this error:

Code: Select all
resolve: AppConfig.cpp:147: void AppConfig::LoadAllSiteInfo(): Assertion `m_SiteEnabledIdx > 0' failed.


Is there supposed to be a default configuration, or should I be prompted to create one? The manual shows a GUI for configuration, but not how to access it.



ANy help with this?
Resolve 14.2.1
14.2.0 works OK.
Offline

Daniel Tufvesson

  • Posts: 121
  • Joined: Sun Sep 18, 2016 11:03 am
  • Location: Stockholm, Sweden

Re: DaVinci Resolve on Linux - Install issues

PostWed Jan 24, 2018 6:32 pm

Iñigo Figuero wrote:
Stuart Jackson wrote:I've managed to install Resolve on a Debian distribution and all the dependent libraries. But when I go to start Resolve (either 12.5.5 or 14.0b1) I get this error:

Code: Select all
resolve: AppConfig.cpp:147: void AppConfig::LoadAllSiteInfo(): Assertion `m_SiteEnabledIdx > 0' failed.


Is there supposed to be a default configuration, or should I be prompted to create one? The manual shows a GUI for configuration, but not how to access it.



ANy help with this?
Resolve 14.2.1
14.2.0 works OK.

I believe this can happen when there is a problem with the Resolve configuration. Is perhaps /opt/resolve/configs/config.dat bad or missing?

Have you tried uninstalling Resolve and then wiping the whole /opt/resolve directory and then install 14.2 again?
Shoot - BMCC | BMPC | BMPCC | BMVA
Edit - Debian Linux 9 | Resolve Studio 15.0.1 | i7-3930K CPU | X79 MB | 32GB RAM | GTX1080 GPU | Decklink SDI
PreviousNext

Return to DaVinci Resolve

Who is online

Users browsing this forum: Geert Geerits, Google Feedfetcher, Krishna Pada, MartinOzFox and 20 guests