- Posts: 9
- Joined: Wed Feb 15, 2017 9:58 am
Hi all.
I have an ATEM 1 M/E Production Switcher system with 3 Blackmagic Studio Cameras connected each one via two BNC to the ATEM (One BNC for the video and the another for the CCU control)
Everything is setted correctly with the 3 cameras, but since a few days ago the CCU of the Camera 1 is giving us problems, there are no connection.
We tried everything, is not a problem of camera or ATEM settings. We found it's a cable issue.
If we connect the Camera 1 to the CCU with a single-long BNC it works perfectly.
But when the cable goes trough one BNC Coupler patch like this it stops working
It's not a problem of the patch because the other connections works perfectly in the same coupler that the CCU1 are.
And when we try to put a single BNC Coupler like this
to unify 2 BNC cables it stops working too.
The cables are working perfectly if I use it for the CCU or VIDEO for Camera 2 or 3, so it's not a problem of the cables neither.
(If I set the Blackmagic Studio Camera 1 like Camera 2 or 3 works perfectly so it's not a issue of that camera)
Im pretty confused of what's going on with this problem , what can I do? Anyone with some ideas?
Thanks!
I have an ATEM 1 M/E Production Switcher system with 3 Blackmagic Studio Cameras connected each one via two BNC to the ATEM (One BNC for the video and the another for the CCU control)
Everything is setted correctly with the 3 cameras, but since a few days ago the CCU of the Camera 1 is giving us problems, there are no connection.
We tried everything, is not a problem of camera or ATEM settings. We found it's a cable issue.
If we connect the Camera 1 to the CCU with a single-long BNC it works perfectly.
But when the cable goes trough one BNC Coupler patch like this it stops working
It's not a problem of the patch because the other connections works perfectly in the same coupler that the CCU1 are.
And when we try to put a single BNC Coupler like this
to unify 2 BNC cables it stops working too.
The cables are working perfectly if I use it for the CCU or VIDEO for Camera 2 or 3, so it's not a problem of the cables neither.
(If I set the Blackmagic Studio Camera 1 like Camera 2 or 3 works perfectly so it's not a issue of that camera)
Im pretty confused of what's going on with this problem , what can I do? Anyone with some ideas?
Thanks!