Video Assist 4k does not work touchscreen

The place for questions about shooting with Blackmagic Cameras.
  • Author
  • Message
Offline
User avatar

VFedoseev

  • Posts: 6
  • Joined: Tue Feb 06, 2018 7:31 pm
  • Location: Russia. Moscow.
  • Real Name: Victor Fedoseev

Video Assist 4k does not work touchscreen

PostTue Feb 06, 2018 7:45 pm

HI, on my Video Assist 4k does not work touchscreen!
HDMI signal coming.
Firmware - 2.5.2

Support is not responding!

HELP!
Last edited by VFedoseev on Tue Feb 06, 2018 10:43 pm, edited 1 time in total.
DOP Victor Fedoseev
www.vfedoseev.ru
Offline
User avatar

VFedoseev

  • Posts: 6
  • Joined: Tue Feb 06, 2018 7:31 pm
  • Location: Russia. Moscow.
  • Real Name: Victor Fedoseev

Re: Video Assist 4k does not work touchscreen

PostTue Feb 06, 2018 8:23 pm

fideo proof:
DOP Victor Fedoseev
www.vfedoseev.ru
Offline
User avatar

VFedoseev

  • Posts: 6
  • Joined: Tue Feb 06, 2018 7:31 pm
  • Location: Russia. Moscow.
  • Real Name: Victor Fedoseev

Re: Video Assist 4k does not work touchscreen

PostTue Feb 06, 2018 10:43 pm

Down to firmware 2.4 didn't solve problem
DOP Victor Fedoseev
www.vfedoseev.ru
Offline
User avatar

VFedoseev

  • Posts: 6
  • Joined: Tue Feb 06, 2018 7:31 pm
  • Location: Russia. Moscow.
  • Real Name: Victor Fedoseev

Re: Video Assist 4k does not work touchscreen

PostWed Feb 07, 2018 2:52 pm

:twisted:
New - $895
Repair - $509
:twisted:

Blackmagic Support EMEA

Thanks for your email.

After taking a look at the serial number of your device, this does appear to be out of the warranty period meaning that any repair procedure we do conduct would be done at a cost.
We have determined that the following charges would be necessary in order to repair your product outside of it's warranty period:

Parts
Video Assist 4K - 7" LCD
$359.00

Labour
$100.00

Shipping
$50.00

To accept this quote, please reply back to this email in acceptance and confirm your invoicing details plus VAT number if applicable.

Please note, you will not receive any invoicing until we have received and tested the item and verified that the repair can be successful. This quote is not final. In the unlikely event that a repair should cost more than this, you will be contacted first. Unless otherwise specified, all prices are quoted without taxes and duties.

If you would like to go ahead with the return based on the conditions above, please complete the returns form below.

Please fill out the RMA form below in as much detail as possible, and copy it into the top of your response. It will need to be above the comment in order for it to come through.
DOP Victor Fedoseev
www.vfedoseev.ru
Offline

Denny Smith

  • Posts: 13131
  • Joined: Thu Aug 01, 2013 4:19 pm
  • Location: USA, Northern Calif.

Re: Video Assist 4k does not work touchscreen

PostWed Feb 07, 2018 5:58 pm

Well, at least it is repairable, and you have an option here. At one time, if a repair exceeded 1/2 of the replacement cost, it was often replaced with a new bit, instead of being repaired.

That said, if the VA is otherwise in good kit, then the $500 repair (it might cost less, as this is a quote without seeing the VA to verify actual issue), is still 400 less than replacement. I would opt formthe repair in this case as it is just a little bit above 1/2 replacement cost.
Cheers
Last edited by Denny Smith on Thu Feb 08, 2018 6:04 pm, edited 1 time in total.
Denny Smith
SHA Productions
Offline
User avatar

VFedoseev

  • Posts: 6
  • Joined: Tue Feb 06, 2018 7:31 pm
  • Location: Russia. Moscow.
  • Real Name: Victor Fedoseev

Re: Video Assist 4k does not work touchscreen

PostThu Feb 08, 2018 11:08 am

It seems to me that this is very expensive. Repair should not cost more than $100. The problem is only in the touch screen. Maybe there's just a wire left.
DOP Victor Fedoseev
www.vfedoseev.ru
Offline

Denny Smith

  • Posts: 13131
  • Joined: Thu Aug 01, 2013 4:19 pm
  • Location: USA, Northern Calif.

Re: Video Assist 4k does not work touchscreen

PostThu Feb 08, 2018 6:08 pm

Labor is reasonable, but parts seem a little high, but this is a 7-inch 1929x1080 HD touch screen.
Cheers
Denny Smith
SHA Productions
Offline
User avatar

VFedoseev

  • Posts: 6
  • Joined: Tue Feb 06, 2018 7:31 pm
  • Location: Russia. Moscow.
  • Real Name: Victor Fedoseev

Re: Video Assist 4k does not work touchscreen

PostThu Feb 08, 2018 6:58 pm

2018y .... 4k OLED monitor....
DOP Victor Fedoseev
www.vfedoseev.ru
Offline

Denny Smith

  • Posts: 13131
  • Joined: Thu Aug 01, 2013 4:19 pm
  • Location: USA, Northern Calif.

Re: Video Assist 4k does not work touchscreen

PostFri Feb 09, 2018 2:42 am

OK. An OLED, that is why is is more than $300.
Cheers
Denny Smith
SHA Productions
Offline

ELYSE NSENGIMANA

  • Posts: 3
  • Joined: Thu Mar 03, 2022 4:34 pm
  • Real Name: NSENGIMANA ELYSE

Re: Video Assist 12g hdr does not work touchscreen

PostThu Mar 03, 2022 4:57 pm

I HAVE A BLACKMAGIC VIDEO ASSIST 12G HDR and its touch screen is no longer working properly.
only a column of 3cm is working on the left of the screen.
When I brought on eBay, it was new and was perfectly working.
After three months, the touch screen starts to deny responding from the right to the left of the screen

Does anyone know how to solve this issue?
THANK YOU!
Offline

ELYSE NSENGIMANA

  • Posts: 3
  • Joined: Thu Mar 03, 2022 4:34 pm
  • Real Name: NSENGIMANA ELYSE

Re: Video Assist 12g hdr does not work touchscreen

PostTue Mar 29, 2022 12:04 am

Does anyone know the process of solving my issue?

I have a video assist 7" 12G SDI (Serial Number: 7834978) and its touchscreen is not working properly.

I need a contact of someone who can fix it.

thank you!
Online
User avatar

rick.lang

  • Posts: 17175
  • Joined: Wed Aug 22, 2012 5:41 pm
  • Location: Victoria BC Canada

Video Assist 4k does not work touchscreen

PostTue Mar 29, 2022 4:17 pm

Have you tried installing the latest version of the firmware? Even if you are using the latest version, removing the firmware from video assist and reinstalling it may help.

What camera are you using to connect to the video assist? More information might help us with suggestions. Your regional BMD Support may also help.
Rick Lang
Offline

ELYSE NSENGIMANA

  • Posts: 3
  • Joined: Thu Mar 03, 2022 4:34 pm
  • Real Name: NSENGIMANA ELYSE

Re: Video Assist 4k does not work touchscreen

PostFri Apr 08, 2022 7:22 pm

rick.lang wrote:Have you tried installing the latest version of the firmware? Even if you are using the latest version, removing the firmware from video assist and reinstalling it may help.

What camera are you using to connect to the video assist? More information might help us with suggestions. Your regional BMD Support may also help.


Hi! I have tried everything without any positive response.
Online
User avatar

rick.lang

  • Posts: 17175
  • Joined: Wed Aug 22, 2012 5:41 pm
  • Location: Victoria BC Canada

Re: Video Assist 4k does not work touchscreen

PostFri Apr 08, 2022 10:55 pm

What camera are you connected to when the touch screen is not responsive?

How are you powering the video assist, battery or with the mains power adapter?

What image do you see on the touch screen? Is it all black or On?
Rick Lang

Return to Cinematography

Who is online

Users browsing this forum: ExzxImages, Kristian Lam and 92 guests