ATEM Television Studio Pro
Hallo,
ich schreibe in Deutsch da mein Englisch nicht auf hohem Niveau ist.
Habe ein ATEM Television Studio Pro-Kontrol Panel erstanden um damit in Zukunft
3 - PTZ Kameras (an den HD-SDI Inputs) zu betreiben sowie an den HDMI Inputs
Laptops. Die Atem Software Version ATEM Switchers 7.3 wurde auf einem Laptop installiert
und damit läst sich das Bedienpanel via Ethernetverbindung auch bedienen.
Mein Problem: wenn ich einen Laptop (Windows Betriebssystem) an den HDMI-Inputs anschließe so ist kein Bild am Preview zu sehen. Habe verschiedene Laptops ausprobiert. Der einzige Laptop bei dem ein Bild zu sehen ist, ist von einem Macbook. Habe probiert die Einstellungen des Mischers zu verändern was auch keinen Erfolg gebracht hat. Input und Output Format: 1080P/50
Würde Unterstützung benötigen.
Greetings from Vienna - Reinhold
I write in German because my English is not at a high level.
Have an ATEM Television Studio Pro-Kontrol Panel purchased in the future
3 - operate PTZ cameras (on the HD-SDI inputs) and on the HDMI inputs
Laptops. The respiratory software version ATEM Switchers 7.3 was installed on a laptop
and thus the operating panel can also be operated via Ethernet connection.
My Problem: if I connect a laptop (Windows operating system) to the HDMI inputs, there is no picture on the preview. Have tried different laptops. The only laptop in which a picture can be seen is from a Macbook. Have tried to change the settings of the mixer which has also brought no success. Input and Output Format: 1080P / 50
Would need assistance.