- Posts: 804
- Joined: Tue Apr 14, 2015 1:30 am
MEDIA POOL:
1. There is no way to manually “replace footage.” From a selected clip. Conform Lock to Selected clip will work for some functions, but this should be simplified.
2. There is no way to manually re-link an offline clip or clips, pointing it to specific files on the hard drive.
EDIT PAGE:
1. Audio often plays out of sync with the video. It’s almost always out of sync by about a 4-12 frames to a full second.
2. At least once, tried to OPT+CLICK to create a keyframe on an audio clip to rubber-band it. I clicked several times and no keyframes appeared. Then I expanded keyframe editor view using the button in the lower right corner, and all the keyframes I tried to create were now visible in the drop-down view, but still invisible on the audio clip itself. So, I then attempted to use the drop-down view to edit and delete the excess keyframes, and as soon as I selected one and hit the delete key, Resolve crashed.
FAIRLIGHT:
1. Audio does not play in sync with the video. It’s almost always out of sync by about a half second or a second.
2. Sometimes when clicking on an audio clip it will not let me delete the clip when using the DELETE/BACKSPACE key.
3. At least once, after highlighting a group of audio clips and then clicking in a blank track to de-select them, they remained selected. Clicked on a single clip and they still all remained selected. I had to click on each clip, then click away for each clip to de-select it.
4. Audio playback will oftentimes crackle (as if distorted or peaking and dropping frames). Scratchy sounding. This is detailed in full in another thread. Suffice it too say it seems to be a software limitation. viewtopic.php?f=21&t=68084&p=381444#p381444
5. When duplicating audio clips with speed changes where pitch correction is turned off, and duplicating or copying/pasting the clips, the pitch correction turns itself back on.
6. When clicking on audio clip(s) in the sequence and attempting to move them directly to the left or right, the clips will jump 2, 3, or 4 tracks up when moved at all. If zoomed into a close view, when the clips jump around, they disappear from the view altogether. This is a huge problem. Having to go back to the edit page to move an audio clip (not linked to video) to the side a few frames is a pain. It should be as simple and easy to edit and move around an audio clip, or groups of unlinked audio clips, such as when editing sound effects or music.
7. Sometimes when right-clicking on an audio clip the options (all except “paste”) are disabled. Ive found this occurs when clips are outside the in/out points. When the in/out points are cleared, then I can right-click on the clip etc. Wish this was how it functioned irrespective of the in/out points.
8. After turning on latching for the PAN settings and successfully recording a 5.1 pan effect on a track, I close out the window hitting the X button and the PAN settings do not play. The only time Fairlight correctly pans the audio is when I have the PAN settings window open. After closing the PAN settings window, and re-opening it, the PAN effect is still there with the keyframed motion, but it will not PAN the audio without that window open.
9. Sometimes at varying zoom levels, I cannot click on rubber band effects in Fairlight.
10. Periodically, one track will stop playing audio. Restarting resolve will solve the problem.
11. Periodically a stereo audio clip will play only out the left channel. Restarting resolve will solve the problem.
12. Periodically waveforms will disappear from clips in the sequence.
13. Cannot copy/paste clip attributes such as Volume levels to other clips.
14. Cannot copy/paste clip attributes such as EQ settings, plugins etc to other clips
15. No way to perform PAN controls on an individual clip. This function would be tremendously beneficial.
16. Cannot select multiple audio clips and click the reset button in the inspector (for volume levels for example) and have it apply to all the clips.
17. Patching is completely non-functional. Patches do not work at all. There is no audio throughput This has been reported by other users and with earlier version of Resolve 14.
1. There is no way to manually “replace footage.” From a selected clip. Conform Lock to Selected clip will work for some functions, but this should be simplified.
2. There is no way to manually re-link an offline clip or clips, pointing it to specific files on the hard drive.
EDIT PAGE:
1. Audio often plays out of sync with the video. It’s almost always out of sync by about a 4-12 frames to a full second.
2. At least once, tried to OPT+CLICK to create a keyframe on an audio clip to rubber-band it. I clicked several times and no keyframes appeared. Then I expanded keyframe editor view using the button in the lower right corner, and all the keyframes I tried to create were now visible in the drop-down view, but still invisible on the audio clip itself. So, I then attempted to use the drop-down view to edit and delete the excess keyframes, and as soon as I selected one and hit the delete key, Resolve crashed.
- Screen Shot 2017-12-20 at 11.23.46 AM.png (19.92 KiB) Viewed 3737 times
FAIRLIGHT:
1. Audio does not play in sync with the video. It’s almost always out of sync by about a half second or a second.
2. Sometimes when clicking on an audio clip it will not let me delete the clip when using the DELETE/BACKSPACE key.
3. At least once, after highlighting a group of audio clips and then clicking in a blank track to de-select them, they remained selected. Clicked on a single clip and they still all remained selected. I had to click on each clip, then click away for each clip to de-select it.
4. Audio playback will oftentimes crackle (as if distorted or peaking and dropping frames). Scratchy sounding. This is detailed in full in another thread. Suffice it too say it seems to be a software limitation. viewtopic.php?f=21&t=68084&p=381444#p381444
5. When duplicating audio clips with speed changes where pitch correction is turned off, and duplicating or copying/pasting the clips, the pitch correction turns itself back on.
6. When clicking on audio clip(s) in the sequence and attempting to move them directly to the left or right, the clips will jump 2, 3, or 4 tracks up when moved at all. If zoomed into a close view, when the clips jump around, they disappear from the view altogether. This is a huge problem. Having to go back to the edit page to move an audio clip (not linked to video) to the side a few frames is a pain. It should be as simple and easy to edit and move around an audio clip, or groups of unlinked audio clips, such as when editing sound effects or music.
7. Sometimes when right-clicking on an audio clip the options (all except “paste”) are disabled. Ive found this occurs when clips are outside the in/out points. When the in/out points are cleared, then I can right-click on the clip etc. Wish this was how it functioned irrespective of the in/out points.
8. After turning on latching for the PAN settings and successfully recording a 5.1 pan effect on a track, I close out the window hitting the X button and the PAN settings do not play. The only time Fairlight correctly pans the audio is when I have the PAN settings window open. After closing the PAN settings window, and re-opening it, the PAN effect is still there with the keyframed motion, but it will not PAN the audio without that window open.
9. Sometimes at varying zoom levels, I cannot click on rubber band effects in Fairlight.
10. Periodically, one track will stop playing audio. Restarting resolve will solve the problem.
11. Periodically a stereo audio clip will play only out the left channel. Restarting resolve will solve the problem.
12. Periodically waveforms will disappear from clips in the sequence.
13. Cannot copy/paste clip attributes such as Volume levels to other clips.
14. Cannot copy/paste clip attributes such as EQ settings, plugins etc to other clips
15. No way to perform PAN controls on an individual clip. This function would be tremendously beneficial.
16. Cannot select multiple audio clips and click the reset button in the inspector (for volume levels for example) and have it apply to all the clips.
17. Patching is completely non-functional. Patches do not work at all. There is no audio throughput This has been reported by other users and with earlier version of Resolve 14.
Configuration:
Resolve Studio (Always the Latest)
Windows 11 Pro Workstation
32 Core AMD Ryzen Threadripper 256GB RAM
RTX 4090
RTX 3090
100G NAS
(1) 32" Ultra-Wide Display, (1) 4K 27” Display
Resolve Studio (Always the Latest)
Windows 11 Pro Workstation
32 Core AMD Ryzen Threadripper 256GB RAM
RTX 4090
RTX 3090
100G NAS
(1) 32" Ultra-Wide Display, (1) 4K 27” Display