Fri May 11, 2018 10:24 am
@mikeal, With stepper motors that would work also.. But you have to build your own hardware software..
Your PT head is going to NULL at startup.. It will rotate to the end position and from there the microprocessor keeps track of every step your motors make.
So preset 1 is X 1290 steps Y = 412 steps. Store.
Preset 2 is X 573 steps Y = 789 steps Store.. Etc.. And then when recalling the presets It will compare it's memory preset with the current location and will start turning to that position..
** I'm already talking to much in Programmer logic haha..
That is what Marc does inside his hardware.. So skip the whole DMX.. And just take the Visca commands from the camera and translate that into Steps for the motors.. Google a bit in Steppermotor arduino and you will find more info on how you could make something like that..
Daniel Wittenaar .:: Xtreemtec Media Productions ::. -= www.xtreemtec.nl =-
4K OBV Trailer, ATEM TVS HD, 4M/E Broadcast Studio 4K, Constelation 8K, Hyperdeck Studio 12G, Ursa Broadcast 4K, 4K fiber converters with Sony Control