- Posts: 5
- Joined: Wed Sep 12, 2018 11:30 am
- Real Name: Mark Ward
The cheapest way would be a HDMI splitter between the camera and the capture card, (if that will work) where one output goes to the capture card and one output to HDMI video projector, but your setup is starting to grow now, and for doing it right, you need the more advanced (switching) equipment BMD has you get more (easy) control, and overview that way.
Or change the capture card, which would be cheaper, but you might have to change your setup, because multiple inputs come only in the SDI format, (as far as i know) and you might need also to adapt to that
Look at the Product index on the BlackMagic Design website, this is as far my knowledge goes, in the short time i learned about Blackmagic Design, there are different options, depending also if this is only for a short time or a more permanent situation.
btw. depending on the length of the HDMI cable(s)or distance, you might be better of with a SDI adaption anyway.... HDMI cables should not be too long.