Mini Panel Crashing Resolve 15

Get answers to your questions about color grading, editing and finishing with DaVinci Resolve.
  • Author
  • Message
Offline

Nick Vega

  • Posts: 108
  • Joined: Sun Apr 07, 2013 4:41 pm

Mini Panel Crashing Resolve 15

PostSun Jan 13, 2019 11:54 pm

Ive been having a constant streak of Resolve hang ups/crashes when using the Mini Panel on V15 (both V15.0, and 15.2).

Resolve was relatively more stable on V14 than it was now when using the panel. The program seems to crash when pressing a button on the Panel, usually always a button from the bottom right hand side. I encountered this issue constantly when on Windows 10 back in late December, and am facing it now on Mac 10.12.6. On the windows it was about 4 times an hour, on Mac now, its about twice an hour.

Once the program crashes and I reboot, the Panel fails to reconnect. I have to turn it off and back on for it to register with resolve.

I have two crash logs from today here: https://we.tl/t-aF6MDGukEb

Hoping to get more insight on whats going on :(

Windows 10 config that always crashed when using Panel on 15:
GTX 1080TI
64GB RAM
Reading media from a raid 0 array via USB C
Decklink Mini
Mini Panel via USB C/3

Now on Mac:
10.12.6 Mac Pro 5,1
GTX980ti + Quadro K620 for GUI
32GB Ram
Reading media from SSD
Decklink Mini 4K
Mini Panel via USB C/3
http://vimeo.com/nickvega
Offline

Michael Tiemann

  • Posts: 683
  • Joined: Fri Jul 05, 2013 11:22 am

Re: Mini Panel Crashing Resolve 15

PostMon Jan 14, 2019 12:50 am

I saw a few dropped connections over USB. Switched to network connection and thus far have seen no hangs (of the mini panel). Resolve has been rock-solid for me since 15.2.2 and a patch that allows me to handle projects with lots and lots of RED media.
MacOS Catalina Version 10.15.7
iMac Pro (2017)
3 GHz Intel Xeon W
64GB 2666 MHz DDR4
Radeon Pro Vega 64 16 GB
RED Rocket-X
Decklink 8K Pro card feeding FSI XM310K Monitor
Offline

Nick Vega

  • Posts: 108
  • Joined: Sun Apr 07, 2013 4:41 pm

Re: Mini Panel Crashing Resolve 15

PostMon Jan 14, 2019 10:19 pm

Bumping for exposure. Hopefully the crash log has something to reveal.
http://vimeo.com/nickvega
Offline

bruce alan greene

  • Posts: 151
  • Joined: Mon Nov 02, 2015 5:06 pm

Re: Mini Panel Crashing Resolve 15

PostMon Jan 14, 2019 11:55 pm

I think I remember running into an issue with the mini panel when I had a few USB powered devices connected to the same USB bus that connected to the mini panel.

Try disconnecting your USB devices, other than the mini panel, and see if that fixes the issue.
Offline

Nick Vega

  • Posts: 108
  • Joined: Sun Apr 07, 2013 4:41 pm

Re: Mini Panel Crashing Resolve 15

PostWed Jan 16, 2019 6:28 am

Another crash. Very consistent when using the disable key on the mini panel to toggle a grade off and on. Saved the crash log.

Not sure whats going on here. Im working on 1080p Prores 4444 Alexa media with a system that can handle it with no issue. But once I start toggling nodes on and off using the Mini panel, the system will hang and then crash :cry:

I don't crash when spamming the disable node keyboard shortcut either.
http://vimeo.com/nickvega
Offline

Nick Vega

  • Posts: 108
  • Joined: Sun Apr 07, 2013 4:41 pm

Re: Mini Panel Crashing Resolve 15

PostWed Jan 16, 2019 6:51 am

Michael Tiemann wrote:I saw a few dropped connections over USB. Switched to network connection and thus far have seen no hangs (of the mini panel). Resolve has been rock-solid for me since 15.2.2 and a patch that allows me to handle projects with lots and lots of RED media.


Ive tried getting the panel to work via ethernet but have had no luck. I can't seem to find any documentation on the process of it online, either. I wasn't able to get it running with DHCP on, so I tried a manual IP address and configured it. The panel showed up in the preference menu as a selection, but once selected, no connection was made (connected via ethernet and powered normally, not with PoE).
http://vimeo.com/nickvega
Offline

Rohit Singhal

Blackmagic Design

  • Posts: 774
  • Joined: Wed Aug 22, 2012 11:07 am

Re: Mini Panel Crashing Resolve 15

PostWed Jan 16, 2019 6:55 am

Nick Vega wrote:Another crash. Very consistent when using the disable key on the mini panel to toggle a grade off and on. Saved the crash log.

Not sure whats going on here. Im working on 1080p Prores 4444 Alexa media with a system that can handle it with no issue. But once I start toggling nodes on and off using the Mini panel, the system will hang and then crash :cry:

I don't crash when spamming the disable node keyboard shortcut either.


Is the crash specifically happening when using a particular project? Can you send me your project as a pm?
Rohit Singhal
DaVinci Resolve Software Development
Blackmagic Design
Offline

Nick Vega

  • Posts: 108
  • Joined: Sun Apr 07, 2013 4:41 pm

Re: Mini Panel Crashing Resolve 15

PostThu Jan 17, 2019 1:56 am

Rohit Singhal wrote:
Nick Vega wrote:Another crash. Very consistent when using the disable key on the mini panel to toggle a grade off and on. Saved the crash log.

Not sure whats going on here. Im working on 1080p Prores 4444 Alexa media with a system that can handle it with no issue. But once I start toggling nodes on and off using the Mini panel, the system will hang and then crash :cry:

I don't crash when spamming the disable node keyboard shortcut either.


Is the crash specifically happening when using a particular project? Can you send me your project as a pm?


Hey Rohit,

The crashing is coming from two different projects (currently on two jobs) on two different machines using the same panel (running 1.2). The windows computer was working on 4K cdng and my current Mac Pro project is working with 1080 prores material. Both projects have consistent crashing when hitting Disable key on the panel. I’ll PM ya both projects when I get home.

Did the crash logs happen to provide any useful information or leads?
http://vimeo.com/nickvega
Offline

Nick Vega

  • Posts: 108
  • Joined: Sun Apr 07, 2013 4:41 pm

Re: Mini Panel Crashing Resolve 15

PostSat Jan 19, 2019 2:27 am

Bumping for visibility.

Other issues on LGG are reporting numerous crashes when toggling nodes on and off as well.

Any insight from the crashlogs? Rohit, I sent you 3 other ones via PM.
http://vimeo.com/nickvega
Offline

Nick Vega

  • Posts: 108
  • Joined: Sun Apr 07, 2013 4:41 pm

Re: Mini Panel Crashing Resolve 15

PostThu Jan 31, 2019 3:23 am

Bumping again, been two weeks without any word and the crashing persists. It’s always when toggling nodes or working on the key output page.

Rohit, did the crash logs and DRPs I sent you over PM reveal anything?
http://vimeo.com/nickvega
Offline

Fabián Matas

  • Posts: 130
  • Joined: Wed Aug 22, 2012 9:35 am

Re: Mini Panel Crashing Resolve 15

PostThu Mar 07, 2019 11:18 am

Hi Nick, I'm having exactly the same issues, lets hope 15.3 fixes it.

Return to DaVinci Resolve

Who is online

Users browsing this forum: Baidu [Spider], Demma K, maldon, MikaelZarb and 186 guests