ATEM only Recognizing 720p Sony handycam

Questions about ATEM Switchers, Camera Converter and everything live!
  • Author
  • Message
Offline

zedorn

  • Posts: 1
  • Joined: Wed Feb 13, 2019 10:53 pm
  • Real Name: zach dorn

ATEM only Recognizing 720p Sony handycam

PostWed Feb 13, 2019 11:00 pm

Hello,

I recently purchased an ATEM TV Studio 8-channel mixer for a theatrical show with live-feeding video cameras. I usually use a Sony Handyam CX-110 for most of my work.

The camera outputs to 720p, 1080i, 1080p. However, the ATEM will only view the device in 720p settings. This sounds like an issue with the Sony CX-110, but I was wondering if anyone had an explanation or suggestions.

Thanks!
Offline
User avatar

Xtreemtec

  • Posts: 3455
  • Joined: Wed Jan 02, 2013 11:48 am
  • Location: The Netherlands

Re: ATEM only Recognizing 720p Sony handycam

PostThu Feb 14, 2019 12:00 pm

Check this topic> Frequently Asked Questions - Atem Mixer >Point 1.02 There is a pretty good description why the camera does not come up. And also how to fix it when you read down that post. ;)
Daniel Wittenaar .:: Xtreemtec Media Productions ::. -= www.xtreemtec.nl =-
4K OBV Trailer, ATEM TVS HD, 1M/E 4K, 4M/E Broadcast Studio 4K, Hyperdeck Studio Mini, Ursa Broadcast 4K, 4K fiber converters with Sony Control
Offline
User avatar

Robert Baker

  • Posts: 81
  • Joined: Mon Jul 11, 2016 4:09 pm

Re: ATEM only Recognizing 720p Sony handycam

PostThu Feb 14, 2019 12:02 pm

That ATEM will only accept one frame rate/format for all the inputs. That means if you set the ATEM to 1080i it will only accept 1080i signals on all the channels. What do you have your ATEM set to and what other frame rates are you trying to input?
Small List of my current toolset:

BMPCC4k - JVC GY-LS300 - JVC HM170UA - Canon 80D - DaVinci Resolve 15 - Adobe CC 2018 - Sony Soundforge 11 - Izotope RX6 Elements - Izotope Neutron Elements

Return to Live Production

Who is online

Users browsing this forum: No registered users and 4 guests