- Posts: 2
- Joined: Tue Feb 19, 2019 10:40 pm
- Real Name: Andy Dickerson
Connect Mac, Atem and hyperdeck all to a network switch.
Observe that all 3 ports connected blink.
I go with the fact that you have your Atem on the default IP address as you did not post your current settings. Which could have been helpfull to spot the error.
Atem IP . . . .> 192.168.10.240
Hyperdeck IP > 192.168.10.241
Mac IP . . . . .> 192.168.10.200
Other settings like Subnet should be set to 255.255.255.0 And Gateway if applicable to 192.168.10.1
Now on the big hyperdecks you also need to hit the Remote button. I do not have my mini with me at the moment. But might be a Menu option that you have to set to enable remote control.
Go into the Atem Software > Atem Settings (Gear Icon left down corner ) > Tab Hyperdeck
Put in the IP address of the hyperdeck. 192.168.10.241 as in this example. Select the input you have the hyperdeck connected to. Enable auto rol. And push the Connect button to connect the Hyperdeck. Hit save and go play
This should be it to get it up and running.
The hyperdeck only accepts 1 remote connection. So be sure it is not taken by any other software like Hyperdeck Control or other 3rth party software.