- Posts: 12
- Joined: Sat Mar 15, 2014 11:41 am
Hi every one!
and I hope I'm not asking too dumb of a question, I have searched through the manuals but haven't figured out how to do this yet. I am building a small grading setup at a friend's post-prod company. We have DaVinci running on a PC and a Decklink 8K Pro card. I would like to send from DaVinci Resolve one signal to my grading monitor (a FSI in HD resolution so I need a HD signal) and one signal to the client's monitor that is a 4K TV (that is HDMI only so the signal is going through a Teranex Mini to convert).
But I have not figured out how to send signals of 2 different resolution.
- In DaVinci Resolve > Preference > Video and Audio I/O, I have selected the first video stream as my output: DeckLink 8K Pro (1). and in Project Settings > Master Settings, I can choose my video format
- in parallel, in Desktop Video Setup, I have assigned the video stream DeckLink 8K Pro (1) to the connectors 1 to 4 (SDI 1 to 4 In or Out)
I do get my video signal on all SDI ports, but they are always of the resolution set in Resolve. So my question is how to I get to choose to send and HD signal to let's say SDI 1, and 4K to SDI 2 that will go to the Teranex and eventually to the 4K monitor. Am I understand the workflow wrong?
Thanks a lot!
and I hope I'm not asking too dumb of a question, I have searched through the manuals but haven't figured out how to do this yet. I am building a small grading setup at a friend's post-prod company. We have DaVinci running on a PC and a Decklink 8K Pro card. I would like to send from DaVinci Resolve one signal to my grading monitor (a FSI in HD resolution so I need a HD signal) and one signal to the client's monitor that is a 4K TV (that is HDMI only so the signal is going through a Teranex Mini to convert).
But I have not figured out how to send signals of 2 different resolution.
- In DaVinci Resolve > Preference > Video and Audio I/O, I have selected the first video stream as my output: DeckLink 8K Pro (1). and in Project Settings > Master Settings, I can choose my video format
- in parallel, in Desktop Video Setup, I have assigned the video stream DeckLink 8K Pro (1) to the connectors 1 to 4 (SDI 1 to 4 In or Out)
I do get my video signal on all SDI ports, but they are always of the resolution set in Resolve. So my question is how to I get to choose to send and HD signal to let's say SDI 1, and 4K to SDI 2 that will go to the Teranex and eventually to the 4K monitor. Am I understand the workflow wrong?
Thanks a lot!