Blackmagic Forum

Sun Jul 07, 2019 5:44 am

I've installed Resolve on my Debian appliance. AMD Ryzen 1800 processor and Sapphire R9 290 video card. Install went swimmingly. Resolve launched into the setup screen and worked fine. However when launching past that, Resolve aborted with this response.

Code: Select all: ActCCMessage Already in Table: Code= c005, Mode= 13, Level= 1, CmdKey= -1, Option= 0 ActCCMessage Already in Table: Code= c006, Mode= 13, Level= 1, CmdKey= -1, Option= 0 ActCCMessage Already in Table: Code= c007, Mode= 13, Level= 1, CmdKey= -1, Option= 0 ActCCMessage Already in Table: Code= 2282, Mode= 0, Level= 0, CmdKey= 8, Option= 0 PnlMsgActionStringAdapter Already in Table: Code= 615e, Mode= 0, Level= 0, CmdKey= -1, Option= 0 16.0b (#033) Linux/Clang Main thread starts: 2907FB00 [0x7f0b2907fb00] | Undefined | INFO | 2019-07-07 17:06:04,926 | -------------------------------------------------------------------------------- [0x7f0b2907fb00] | Undefined | INFO | 2019-07-07 17:06:04,927 | Loaded log config from /home/yorick/.local/share/DaVinciResolve/configs/log-conf.xml [0x7f0b2907fb00] | Undefined | INFO | 2019-07-07 17:06:04,927 | -------------------------------------------------------------------------------- Aborted

.local/DaVinciResolve/log/logarchive Log reads

Code: Select all: [0x7f1ebc781b00] | Main | INFO | 2019-07-07 16:45:33,823 | Running DaVinci Resolve v16.0.0b.033 (Linux/Clang) [0x7f1ebc781b00] | Main | INFO | 2019-07-07 16:45:33,824 | Updating display GPU information... OpenCL error -1001: 'Unspecified Error', GPUPropertiesUtilUnix.cpp:338. terminate called after throwing an instance of 'ReactorGPU::GPUException' ==========[CRASH DUMP]========== Please send this to support: #TIME Sun Jul 7 16:45:33 2019 - Uptime 00:00:00 (hh:mm:ss) #PROGRAM_NAME DaVinci Resolve v16.0.0b.033 (Linux/Clang) /opt/resolve/bin/resolve() [0x506b849] /opt/resolve/bin/resolve() [0x506b03a] /lib/x86_64-linux-gnu/libpthread.so.0(+0x110e0) [0x7f1ec7c900e0] /lib/x86_64-linux-gnu/libc.so.6(gsignal+0xcf) [0x7f1ec5d0ffff] /lib/x86_64-linux-gnu/libc.so.6(abort+0x16a) [0x7f1ec5d1142a] /opt/resolve/bin/resolve(_ZN9__gnu_cxx27__verbose_terminate_handlerEv+0x15d) [0x70d0d5d] /opt/resolve/bin/../libs/libc++abi.so.1(+0x22036) [0x7f1ef83fb036] /opt/resolve/bin/../libs/libc++abi.so.1(+0x219d7) [0x7f1ef83fa9d7] /opt/resolve/bin/resolve() [0x1deb7ec] /opt/resolve/bin/resolve() [0x1deafb9] /opt/resolve/bin/resolve() [0x1de50cc] /opt/resolve/bin/resolve() [0x1db3f8b] /opt/resolve/bin/resolve() [0x1db127e] /opt/resolve/bin/resolve() [0x1dafe04] /opt/resolve/bin/resolve() [0x1daf6b8] /opt/resolve/bin/resolve() [0x1dc35c9] /opt/resolve/bin/resolve() [0x1dab2b7] /lib/x86_64-linux-gnu/libc.so.6(__libc_start_main+0xf1) [0x7f1ec5cfd2e1] /opt/resolve/bin/resolve() [0x1daa0dd] Signal Number = 6 ================================ [0x7f1ebc781b00] | Main | INFO | 2019-07-07 16:45:33,825 | Updating display GPU information... OpenCL error -1001: 'Unspecified Error', GPUPropertiesUtilUnix.cpp:338. terminate called recursively ==========[CRASH DUMP]========== Please send this to support: #TIME Sun Jul 7 16:45:33 2019 - Uptime 00:00:00 (hh:mm:ss) #PROGRAM_NAME DaVinci Resolve v16.0.0b.033 (Linux/Clang) /opt/resolve/bin/resolve() [0x506b849] /opt/resolve/bin/resolve() [0x506b03a] /lib/x86_64-linux-gnu/libpthread.so.0(+0x110e0) [0x7f1ec7c900e0] /lib/x86_64-linux-gnu/libc.so.6(gsignal+0xcf) [0x7f1ec5d0ffff] /lib/x86_64-linux-gnu/libc.so.6(abort+0x16a) [0x7f1ec5d1142a] /opt/resolve/bin/resolve(_ZN9__gnu_cxx27__verbose_terminate_handlerEv+0xed) [0x70d0ced] /opt/resolve/bin/../libs/libc++abi.so.1(+0x22036) [0x7f1ef83fb036] /opt/resolve/bin/../libs/libc++abi.so.1(+0x223a1) [0x7f1ef83fb3a1] /opt/resolve/bin/../libs/libc++abi.so.1(+0x228f7) [0x7f1ef83fb8f7] /opt/resolve/bin/../libs/libc++abi.so.1(__gxx_personality_v0+0x6c) [0x7f1ef83fbddc] /lib/x86_64-linux-gnu/libgcc_s.so.1(_Unwind_RaiseException+0x73) [0x7f1ec608c213] /opt/resolve/bin/../libs/libc++abi.so.1(__cxa_throw+0x66) [0x7f1ef83fa9c6] /opt/resolve/bin/resolve() [0x1deb7ec] /opt/resolve/bin/resolve() [0x1deafb9] /opt/resolve/bin/resolve() [0x1de50cc] /opt/resolve/bin/resolve() [0x1db3f8b] /opt/resolve/bin/resolve() [0x1db127e] /opt/resolve/bin/resolve() [0x1dafe04] /opt/resolve/bin/resolve() [0x1daf6b8] /opt/resolve/bin/resolve() [0x1de68cd] /opt/resolve/bin/resolve() [0x506b3f5] /lib/x86_64-linux-gnu/libpthread.so.0(+0x110e0) [0x7f1ec7c900e0] /lib/x86_64-linux-gnu/libc.so.6(gsignal+0xcf) [0x7f1ec5d0ffff] /lib/x86_64-linux-gnu/libc.so.6(abort+0x16a) [0x7f1ec5d1142a] /opt/resolve/bin/resolve(_ZN9__gnu_cxx27__verbose_terminate_handlerEv+0x15d) [0x70d0d5d] /opt/resolve/bin/../libs/libc++abi.so.1(+0x22036) [0x7f1ef83fb036] /opt/resolve/bin/../libs/libc++abi.so.1(+0x219d7) [0x7f1ef83fa9d7] /opt/resolve/bin/resolve() [0x1deb7ec] /opt/resolve/bin/resolve() [0x1deafb9] /opt/resolve/bin/resolve() [0x1de50cc] /opt/resolve/bin/resolve() [0x1db3f8b] /opt/resolve/bin/resolve() [0x1db127e] /opt/resolve/bin/resolve() [0x1dafe04] /opt/resolve/bin/resolve() [0x1daf6b8] /opt/resolve/bin/resolve() [0x1dc35c9] /opt/resolve/bin/resolve() [0x1dab2b7] /lib/x86_64-linux-gnu/libc.so.6(__libc_start_main+0xf1) [0x7f1ec5cfd2e1] /opt/resolve/bin/resolve() [0x1daa0dd] Signal Number = 6 ================================

First glance seems to be GPU problem. Any ideas as to what I'm missing?

Sun Jul 07, 2019 10:21 am

Hi,
what version of the OpenCL stack have you installed?

Mon Jul 15, 2019 6:03 pm

I had originally thought that ROCM 2.6 was a winner when the viewers started working in fusion. But if I used any thing text based beyond Text+ it would crash. No titles would work. Down grading to ROCM 2.2 seems to be working well so far. Thanks to every one that suggested it.

My steps

Install Centos 7.
sudo yum install -y epel-release
sudo yum install -y dkms kernel-headers-`uname -r` kernel-devel-`uname -r`
nano -w /etc/yum.repos.d/rocm.repo

Past this in

[ROCm]
name=ROCm
baseurl=http://repo.radeon.com/rocm/yum/2.2/
enabled=1
gpgcheck=0

Then CTRL+X to save
yum install rocm-dkms
reboot
Install DR.
Test
Collapse in relief that it fiiiiiinally works
Never, ever, ever patch.

Tue Jul 16, 2019 6:41 am

Can confirm that rocm 2.6 causes issues in Fusion page, using anything 3D.
2D seems fine, but in my projects I switched all the settings to use GPU from auto to off.

Ubuntu 18.04.2, rolled back to rocm 2.5, Fusion seems fine now.

I admit that lately I tought to switch to Nvidia, but the binary blob driver for me is a major issue. Having a workstation run on an all open driver stack is a big plus.
Hoping things will get better and better with time.

Tue Jul 16, 2019 5:49 pm

With ROCM 2.6 I had the Fusion viewers working and I could do things like add a back ground and use the particle emitter.

Where I ran into problems is using any kind of Fusion + text effect. Text+ worked but any thing else would start eating resources and crash DR. If I moved to the edit page and dragged any fusion title effect to the time line every thing would suddenly get slow and down she would go.

Thu Jul 25, 2019 1:08 pm

Hi, just got my new PC and DaVinci Resolve 15.3.1 works great, but 16.0b7 hangs or crashes at startup at "Looking for control surface".

I suspect it has something to do with Radeon and OpenCL, although I know for a fact that my setup is fine because other applications (e.g. DaVinci Resolve 15, Luxcore and Blender) use the card with OpenCL just fine.

Thanks for your help

strace logs: http://www.callistix.net/resolve/resolve_strace.out
glxinfo: http://www.callistix.net/resolve/glxinfo.txt

~/.local/share/DaVinciResolve/crash_archive.txt

Code: Select all: #TIME Thu Jul 25 15:00:46 2019 - Uptime 00:00:02 (hh:mm:ss) #PROGRAM_NAME DaVinci Resolve v16.0.0.050 (Linux/Clang) /opt/resolve/bin/resolve() [0x509db59] /opt/resolve/bin/resolve() [0x509d34a] /lib/x86_64-linux-gnu/libpthread.so.0(+0x12730) [0x7fe40290a730] /lib/x86_64-linux-gnu/libc.so.6(+0x15c181) [0x7fe400b5b181] /opt/amdgpu-pro/lib/x86_64-linux-gnu/libamdocl64.so(clGetDeviceInfo+0x26d) [0x7fe3f25d466d] /opt/resolve/bin/resolve() [0x5b57b57] /opt/resolve/bin/resolve() [0x5bd56e1] /opt/resolve/bin/resolve() [0x5bd99d3] /opt/resolve/bin/resolve() [0x5b497ae] /opt/resolve/bin/resolve() [0x202293c] /opt/resolve/bin/resolve() [0x2026ced] /lib/x86_64-linux-gnu/libpthread.so.0(+0x7fa3) [0x7fe4028fffa3] /lib/x86_64-linux-gnu/libc.so.6(clone+0x3f) [0x7fe400af84cf] Signal Number = 11

~/.local/share/DaVinciResolve/logs/ResolveDebug.txt

Code: Select all: [0x7fe3fd10a240] | Main | INFO | 2019-07-25 15:00:44,153 | Running DaVinci Resolve v16.0.0.050 (Linux/Clang) [0x7fe3fd10a240] | Main | INFO | 2019-07-25 15:00:44,154 | Updating display GPU information... [0x7fe3fd10a240] | Main | INFO | 2019-07-25 15:00:44,225 | Detecting Main Display properties [0x7fe3fd10a240] | Main | INFO | 2019-07-25 15:00:44,231 | Process to detect main display has finished [0x7fe3fd10a240] | Main | INFO | 2019-07-25 15:00:44,242 | Fallback process to detect main display has finished [0x7fe3fd10a240] | Main | INFO | 2019-07-25 15:00:44,242 | GPU Name = 'Radeon RX Vega', Main display = 0 [0x7fe3fd10a240] | Main | INFO | 2019-07-25 15:00:44,243 | 1 GPUs (excluding display GPU) found. Using OpenCL for processing. [0x7fe3fd10a240] | Main | INFO | 2019-07-25 15:00:44,243 | Not GLmap capable. GPUs: 1 discrete, 0 integrated, 0 external. Auto mapping, OpenCL processing, main display not on external GPU. [0x7fe3fd10a240] | Main | INFO | 2019-07-25 15:00:44,243 | Setting LsManager.3.NumGPUs = 1 [0x7fe3fd10a240] | IO | INFO | 2019-07-25 15:00:44,243 | RED InitializeSdk with library path at /opt/resolve/libs [0x7fe3fd10a240] | IO | INFO | 2019-07-25 15:00:44,280 | R3DAPI 7.1.0-3YM06 (20180720 L64S) R3DSDK 7.1.0-3YM06 (20180720 L64D) RED CUDA 7.1.0-45494 (20180721) RED OPENCL 7.1.0-45494 (20180721) [/opt/resolve/libs/] init is successful [0x7fe3fd10a240] | Main | INFO | 2019-07-25 15:00:44,280 | 0 RED rocket cards available There are 1 GPUs in the system. libDeckLinkAPI.so: cannot open shared object file: No such file or directory [0x7fe3fd10a240] | Main | INFO | 2019-07-25 15:00:44,281 | Decklink model name: '', version: '' [0x7fe3fd10a240] | DVIP | INFO | 2019-07-25 15:00:44,281 | DVIP Version : 16.0.0, Revision = 87387 (Release) [0x7fe3fd10a240] | SyManager | WARN | 2019-07-25 15:00:44,322 | Failed to load user preferences. [0x7fe3fd10a240] | Main | INFO | 2019-07-25 15:00:44,344 | Installed custom font: Open Sans [0x7fe3fd10a240] | Main | INFO | 2019-07-25 15:00:44,345 | Installed custom font: Open Sans [0x7fe3fd10a240] | Main | INFO | 2019-07-25 15:00:44,345 | Installed custom font: Open Sans [0x7fe3fd10a240] | Main | INFO | 2019-07-25 15:00:44,370 | Finished loading Application style sheet Local.Speed.Debug switched OFF - '' [0x7fe3d3d0d700] | LeManager | INFO | 2019-07-25 15:00:44,598 | 521, 38 [0x7fe3fd10a240] | BtCommon | INFO | 2019-07-25 15:00:45,124 | Memory config: reserved=6000M pinned=4000M log=0 [0x7fe3fd10a240] | BtCommon | INFO | 2019-07-25 15:00:45,124 | Using default pooled memory manager [0x7fe3d350c700] | BtCommon | INFO | 2019-07-25 15:00:45,124 | BtResourceManager Process Thread Started [0x7fe3fd10a240] | BtCommon | INFO | 2019-07-25 15:00:45,127 | Daemon DPDecoder is started 50010 [0x7fe3fd10a240] | BtCommon | INFO | 2019-07-25 15:00:45,131 | Daemon DPDecoder is started 50011 [0x7fe3fd10a240] | BtCommon | INFO | 2019-07-25 15:00:45,135 | Daemon DPDecoder is started 50012 [0x7fe3fd10a240] | BtCommon | INFO | 2019-07-25 15:00:45,139 | Daemon DPDecoder is started 50013 [0x7fe3fd10a240] | BtCommon | INFO | 2019-07-25 15:00:45,143 | Daemon DPDecoder is started 50014 [0x7fe3fd10a240] | BtCommon | INFO | 2019-07-25 15:00:45,145 | Daemon DPDecoder is started 50015 [0x7fe3fd10a240] | BtCommon | INFO | 2019-07-25 15:00:45,149 | Daemon DPDecoder is started 50016 [0x7fe3fd10a240] | BtCommon | INFO | 2019-07-25 15:00:45,152 | Daemon DPDecoder is started 50017 [0x7fe3fd10a240] | SyManager | INFO | 2019-07-25 15:00:45,204 | Total: 20, NumDtThreads: 8, NumComms: 0, NumSites: 1 [0x7fe3fd10a240] | SyManager | INFO | 2019-07-25 15:00:45,204 | Lookaheads -> playback = 20, record = 20, stop = 2 Sy High Command Handler Thread ----- (140616446019328) SY high priority cmd handler thread starts: D1508700 Sy Low Command Handler Thread ----- (140616437626624) SY low priority cmd handler thread starts: D0D07700 Sy Data Handler Thread ----- (140616429233920) SY data handler thread starts: D0506700 Gs High Command Handler Thread ----- (140616404055808) GS high priority cmd handler thread starts: CED03700 Gs Low Command Handler Thread ----- (140616395663104) GS low priority cmd handler thread starts: CE502700 [0x7fe3cdd01700] | GsManager | INFO | 2019-07-25 15:00:45,205 | Gs Processor Thread ----- (140616387270400) Dp High Command Handler Thread ----- (140616378877696) DP high priority cmd handler thread starts: CD500700 GS processor thread starts: CDD01700 Local.Speed.Verbose switched OFF - '' [0x7fe3cf504700] | SyManager | ERROR | 2019-07-25 15:00:45,205 | Failed to connect to panel socket Dp Low Command Handler Thread ----- (140616370484992) DP low priority cmd handler thread starts: CCCFF700 Dt High Command Handler Thread ----- (140616362092288) DT high priority cmd handler thhread starts: CC4FE700 Dt Low Command Handler Thread ----- (140616353699584) DT low priority cmd handler thread starts: CBCFD700 [0x7fe3cf504700] | SyManager | ERROR | 2019-07-25 15:00:45,205 | DRIVER: open /var/tmp/davinci_socket failed [0x7fe3fd10a240] | DtManager | INFO | 2019-07-25 15:00:45,205 | Using 8 generic IO threads [0x7fe3cb4fc700] | DtManager | INFO | 2019-07-25 15:00:45,205 | Dt Data Handler Thread Started DT data handler thread starts: CB4FC700 [0x7fe3fd10a240] | DtManager | INFO | 2019-07-25 15:00:45,206 | Total of 16 IO threads (including 8 generic and 8 Red decode threads) [0x7fe3cacfb700] | DtManager | INFO | 2019-07-25 15:00:45,206 | Dt Worker Thread Started [0x7fe3ca4fa700] | DtManager | INFO | 2019-07-25 15:00:45,206 | Dt Worker Thread Started [0x7fe3c9cf9700] | DtManager | INFO | 2019-07-25 15:00:45,206 | Dt Worker Thread Started [0x7fe3c94f8700] | DtManager | INFO | 2019-07-25 15:00:45,206 | Dt Worker Thread Started [0x7fe3c8cf7700] | DtManager | INFO | 2019-07-25 15:00:45,206 | Dt Worker Thread Started [0x7fe3c5cf1700] | DtManager | INFO | 2019-07-25 15:00:45,207 | Dt Worker Thread Started [0x7fe3c54f0700] | DtManager | INFO | 2019-07-25 15:00:45,207 | Dt Worker Thread Started [0x7fe3c44ee700] | DtManager | INFO | 2019-07-25 15:00:45,207 | Dt Worker Thread Started [0x7fe3c74f4700] | DtManager | INFO | 2019-07-25 15:00:45,207 | Dt Worker Thread Started [0x7fe3c7cf5700] | DtManager | INFO | 2019-07-25 15:00:45,207 | Dt Worker Thread Started Ls Data Handler Thread ----- (140616177452800) Ls High Command Handler Thread ----- (140616194238208) Ls Low Command Handler Thread ----- (140616185845504) LS data handler thread starts: C14E8700 LS low priority cmd handler thread starts: C1CE9700 Ls High Command Handler Thread ----- (140616169060096) Ls Data Handler Thread ----- (140616152274688) Ls Low Command Handler Thread ----- (140616160667392) LS data handler thread starts: BFCE5700 Ls High Command Handler Thread ----- (140616143881984) LS low priority cmd handler thread starts: C04E6700 Ls Low Command Handler Thread ----- (140616135489280) Ls Data Handler Thread ----- (140616127096576) LS low priority cmd handler thread starts: BECE3700 [0x7fe3be4e2700] | GPUManager | INFO | 2019-07-25 15:00:45,208 | Let There Be OpenCL Light! Mem Data Transmitter Thread ----- (140616118703872) Mem data transmitter thread starts: BDCE1700 [0x7fe3c4cef700] | DtManager | INFO | 2019-07-25 15:00:45,207 | Dt Worker Thread Started [0x7fe3c3ced700] | DtManager | INFO | 2019-07-25 15:00:45,207 | Dt Worker Thread Started [0x7fe3c34ec700] | DtManager | INFO | 2019-07-25 15:00:45,207 | Dt Worker Thread Started [0x7fe3c6cf3700] | DtManager | INFO | 2019-07-25 15:00:45,207 | Dt Worker Thread Started [0x7fe3c2ceb700] | DtManager | INFO | 2019-07-25 15:00:45,208 | Dt Worker Thread Started [0x7fe3c64f2700] | DtManager | INFO | 2019-07-25 15:00:45,207 | Dt Worker Thread Started [0x7fe3fd10a240] | DbCommon2 | INFO | 2019-07-25 15:00:45,209 | Loading dblist file: /home/vitaminx/.local/share/DaVinciResolve/configs/.dblist [0x7fe3be4e2700] | GPUManager | INFO | 2019-07-25 15:00:45,209 | Start detecting OpenCL boards [0x7fe3c84f6700] | DtManager | INFO | 2019-07-25 15:00:45,207 | Dt Worker Thread Started [0x7fe3be4e2700] | GPUManager | INFO | 2019-07-25 15:00:45,210 | Found qualified OpenCL board 0: platform - AMD Accelerated Parallel Processing, vendor - Advanced Micro Devices, Inc., id - 0x7fe3f63431b0, device name - Radeon RX Vega id - 0x7fe3f657c110, global memory size (MB) - 8176, local memory size (KB) - 64, max global memory alloc size (MB) - 4048 [0x7fe3be4e2700] | GPUManager | INFO | 2019-07-25 15:00:45,210 | 1 OpenCL boards detected [0x7fe3be4e2700] | GPUManager | INFO | 2019-07-25 15:00:45,211 | Board manager thread id 0xbd4e0700 policy 0 priority 0 [0x7fe3bd4e0700] | GPUManager | INFO | 2019-07-25 15:00:45,211 | Initializing GPU board 0 with context thread 0 [0x7fe3fd10a240] | IO | INFO | 2019-07-25 15:00:45,219 | Using DNxHR library v2.4.0.57r [0x7fe3bd4e0700] | GPUManager | INFO | 2019-07-25 15:00:45,379 | Setting channel cache size on GPU board 0 to 4 [0x7fe3bd4e0700] | GPUManager | INFO | 2019-07-25 15:00:45,379 | Board manager 0 on thread 0 initialization done on GPU Radeon RX Vega MidiInDummy: This class provides no functionality. MidiOutDummy: This class provides no functionality. [0x7fe3fd10a240] | Fairlight | INFO | 2019-07-25 15:00:46,657 | 00.00.01.285(000): Running Fairlight (r011896-7e84286) [0x7fe3fd10a240] | UI.GLContext | INFO | 2019-07-25 15:00:46,669 | Creating shared OpenGL context for this thread (2 total). [0x7fe3fd10a240] | UI.GLContext | INFO | 2019-07-25 15:00:46,677 | Initialized OpenGL 4.5 (requested 2.0) on device 'X.Org Radeon RX Vega (VEGA10, DRM 3.27.0, 5.0.0-trunk-amd64, LLVM 7.0.1)' [0x7fe35450d700] | UI.GLContext | INFO | 2019-07-25 15:00:46,677 | Creating shared OpenGL context for this thread (3 total). ==========[CRASH DUMP]========== Please send this to support: #TIME Thu Jul 25 15:00:46 2019 - Uptime 00:00:02 (hh:mm:ss) #PROGRAM_NAME DaVinci Resolve v16.0.0.050 (Linux/Clang) /opt/resolve/bin/resolve() [0x509db59] /opt/resolve/bin/resolve() [0x509d34a] /lib/x86_64-linux-gnu/libpthread.so.0(+0x12730) [0x7fe40290a730] /lib/x86_64-linux-gnu/libc.so.6(+0x15c181) [0x7fe400b5b181] /opt/amdgpu-pro/lib/x86_64-linux-gnu/libamdocl64.so(clGetDeviceInfo+0x26d) [0x7fe3f25d466d] /opt/resolve/bin/resolve() [0x5b57b57] /opt/resolve/bin/resolve() [0x5bd56e1] /opt/resolve/bin/resolve() [0x5bd99d3] /opt/resolve/bin/resolve() [0x5b497ae] /opt/resolve/bin/resolve() [0x202293c] /opt/resolve/bin/resolve() [0x2026ced] /lib/x86_64-linux-gnu/libpthread.so.0(+0x7fa3) [0x7fe4028fffa3] /lib/x86_64-linux-gnu/libc.so.6(clone+0x3f) [0x7fe400af84cf] Signal Number = 11 ================================ [0x7fe3bd4e0700] | GPUManager | INFO | 2019-07-25 15:00:54,424 | Completed prebuild of basic OpenCL kernels in 9045 msec [0x7fe3bd4e0700] | GPUManager | INFO | 2019-07-25 15:00:54,424 | Entering loop to wait for commands [0x7fe3be4e2700] | GPUManager | INFO | 2019-07-25 15:00:54,424 | Finished initializing OpenCL board 0 <Radeon RX Vega> on platform <AMD Accelerated Parallel Processing> clock rate <1630> multiprocessor count <64> global mem size (MB) 8176, available mem size (MB) 0, shared mem size (KB) 64, on SBM[0|0] [0x7fe3be4e2700] | GPUManager | INFO | 2019-07-25 15:00:54,425 | Hired OpenCL board 0 <Radeon RX Vega> [0x7fe3be4e2700] | GPUManager | INFO | 2019-07-25 15:00:54,470 | Let There Be OpenCL Light, Done!! Board 0 - Radeon_RX_Vega 1 REACTOR GPU NAMES = Radeon_RX_Vega, LS data handler thread starts: BE4E2700 [0x7fe35450d700] | CrashReport | ERROR | 2019-07-25 15:00:54,905 | Compress() : Failed to add file to archive. ActCCMessage Already in Table: Code= c005, Mode= 13, Level= 1, CmdKey= -1, Option= 0 ActCCMessage Already in Table: Code= c006, Mode= 13, Level= 1, CmdKey= -1, Option= 0 ActCCMessage Already in Table: Code= c007, Mode= 13, Level= 1, CmdKey= -1, Option= 0 ActCCMessage Already in Table: Code= 2282, Mode= 0, Level= 0, CmdKey= 8, Option= 0 PnlMsgActionStringAdapter Already in Table: Code= 615e, Mode= 0, Level= 0, CmdKey= -1, Option= 0 log4cxx: No appender could be found for logger (Main). log4cxx: Please initialize the log4cxx system properly.

lspci

Code: Select all: 00:00.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 17h (Models 00h-0fh) Root Complex 00:00.2 IOMMU: Advanced Micro Devices, Inc. [AMD] Family 17h (Models 00h-0fh) I/O Memory Management Unit 00:01.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 17h (Models 00h-1fh) PCIe Dummy Host Bridge 00:01.1 PCI bridge: Advanced Micro Devices, Inc. [AMD] Family 17h (Models 00h-0fh) PCIe GPP Bridge 00:01.3 PCI bridge: Advanced Micro Devices, Inc. [AMD] Family 17h (Models 00h-0fh) PCIe GPP Bridge 00:02.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 17h (Models 00h-1fh) PCIe Dummy Host Bridge 00:03.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 17h (Models 00h-1fh) PCIe Dummy Host Bridge 00:04.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 17h (Models 00h-1fh) PCIe Dummy Host Bridge 00:07.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 17h (Models 00h-1fh) PCIe Dummy Host Bridge 00:07.1 PCI bridge: Advanced Micro Devices, Inc. [AMD] Family 17h (Models 00h-0fh) Internal PCIe GPP Bridge 0 to Bus B 00:08.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 17h (Models 00h-1fh) PCIe Dummy Host Bridge 00:08.1 PCI bridge: Advanced Micro Devices, Inc. [AMD] Family 17h (Models 00h-0fh) Internal PCIe GPP Bridge 0 to Bus B 00:14.0 SMBus: Advanced Micro Devices, Inc. [AMD] FCH SMBus Controller (rev 59) 00:14.3 ISA bridge: Advanced Micro Devices, Inc. [AMD] FCH LPC Bridge (rev 51) 00:18.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 17h (Models 00h-0fh) Data Fabric: Device 18h; Function 0 00:18.1 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 17h (Models 00h-0fh) Data Fabric: Device 18h; Function 1 00:18.2 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 17h (Models 00h-0fh) Data Fabric: Device 18h; Function 2 00:18.3 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 17h (Models 00h-0fh) Data Fabric: Device 18h; Function 3 00:18.4 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 17h (Models 00h-0fh) Data Fabric: Device 18h; Function 4 00:18.5 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 17h (Models 00h-0fh) Data Fabric: Device 18h; Function 5 00:18.6 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 17h (Models 00h-0fh) Data Fabric: Device 18h; Function 6 00:18.7 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 17h (Models 00h-0fh) Data Fabric: Device 18h; Function 7 00:19.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 17h (Models 00h-0fh) Data Fabric: Device 18h; Function 0 00:19.1 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 17h (Models 00h-0fh) Data Fabric: Device 18h; Function 1 00:19.2 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 17h (Models 00h-0fh) Data Fabric: Device 18h; Function 2 00:19.3 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 17h (Models 00h-0fh) Data Fabric: Device 18h; Function 3 00:19.4 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 17h (Models 00h-0fh) Data Fabric: Device 18h; Function 4 00:19.5 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 17h (Models 00h-0fh) Data Fabric: Device 18h; Function 5 00:19.6 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 17h (Models 00h-0fh) Data Fabric: Device 18h; Function 6 00:19.7 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 17h (Models 00h-0fh) Data Fabric: Device 18h; Function 7 01:00.0 USB controller: Advanced Micro Devices, Inc. [AMD] X399 Series Chipset USB 3.1 xHCI Controller (rev 02) 01:00.1 SATA controller: Advanced Micro Devices, Inc. [AMD] X399 Series Chipset SATA Controller (rev 02) 01:00.2 PCI bridge: Advanced Micro Devices, Inc. [AMD] X399 Series Chipset PCIe Bridge (rev 02) 02:00.0 PCI bridge: Advanced Micro Devices, Inc. [AMD] 300 Series Chipset PCIe Port (rev 02) 02:01.0 PCI bridge: Advanced Micro Devices, Inc. [AMD] 300 Series Chipset PCIe Port (rev 02) 02:02.0 PCI bridge: Advanced Micro Devices, Inc. [AMD] 300 Series Chipset PCIe Port (rev 02) 02:03.0 PCI bridge: Advanced Micro Devices, Inc. [AMD] 300 Series Chipset PCIe Port (rev 02) 02:04.0 PCI bridge: Advanced Micro Devices, Inc. [AMD] 300 Series Chipset PCIe Port (rev 02) 04:00.0 Ethernet controller: Intel Corporation I211 Gigabit Network Connection (rev 03) 08:00.0 Network controller: Broadcom Inc. and subsidiaries BCM4352 802.11ac Wireless Network Adapter (rev 03) 09:00.0 Non-Essential Instrumentation [1300]: Advanced Micro Devices, Inc. [AMD] Zeppelin/Raven/Raven2 PCIe Dummy Function 09:00.2 Encryption controller: Advanced Micro Devices, Inc. [AMD] Family 17h (Models 00h-0fh) Platform Security Processor 09:00.3 USB controller: Advanced Micro Devices, Inc. [AMD] Zeppelin USB 3.0 Host controller 0a:00.0 Non-Essential Instrumentation [1300]: Advanced Micro Devices, Inc. [AMD] Zeppelin/Renoir PCIe Dummy Function 0a:00.2 SATA controller: Advanced Micro Devices, Inc. [AMD] FCH SATA Controller [AHCI mode] (rev 51) 0a:00.3 Audio device: Advanced Micro Devices, Inc. [AMD] Family 17h (Models 00h-0fh) HD Audio Controller 40:00.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 17h (Models 00h-0fh) Root Complex 40:00.2 IOMMU: Advanced Micro Devices, Inc. [AMD] Family 17h (Models 00h-0fh) I/O Memory Management Unit 40:01.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 17h (Models 00h-1fh) PCIe Dummy Host Bridge 40:02.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 17h (Models 00h-1fh) PCIe Dummy Host Bridge 40:03.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 17h (Models 00h-1fh) PCIe Dummy Host Bridge 40:03.1 PCI bridge: Advanced Micro Devices, Inc. [AMD] Family 17h (Models 00h-0fh) PCIe GPP Bridge 40:04.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 17h (Models 00h-1fh) PCIe Dummy Host Bridge 40:07.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 17h (Models 00h-1fh) PCIe Dummy Host Bridge 40:07.1 PCI bridge: Advanced Micro Devices, Inc. [AMD] Family 17h (Models 00h-0fh) Internal PCIe GPP Bridge 0 to Bus B 40:08.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 17h (Models 00h-1fh) PCIe Dummy Host Bridge 40:08.1 PCI bridge: Advanced Micro Devices, Inc. [AMD] Family 17h (Models 00h-0fh) Internal PCIe GPP Bridge 0 to Bus B 41:00.0 PCI bridge: Advanced Micro Devices, Inc. [AMD] Device 1470 (rev c1) 42:00.0 PCI bridge: Advanced Micro Devices, Inc. [AMD] Device 1471 43:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Vega 10 XL/XT [Radeon RX Vega 56/64] (rev c1) 43:00.1 Audio device: Advanced Micro Devices, Inc. [AMD/ATI] Vega 10 HDMI Audio [Radeon Vega 56/64] 44:00.0 Non-Essential Instrumentation [1300]: Advanced Micro Devices, Inc. [AMD] Zeppelin/Raven/Raven2 PCIe Dummy Function 44:00.2 Encryption controller: Advanced Micro Devices, Inc. [AMD] Family 17h (Models 00h-0fh) Platform Security Processor 44:00.3 USB controller: Advanced Micro Devices, Inc. [AMD] Zeppelin USB 3.0 Host controller 45:00.0 Non-Essential Instrumentation [1300]: Advanced Micro Devices, Inc. [AMD] Zeppelin/Renoir PCIe Dummy Function 45:00.2 SATA controller: Advanced Micro Devices, Inc. [AMD] FCH SATA Controller [AHCI mode] (rev 51)

lspci -vv -s 43:00.0

Code: Select all: 43:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Vega 10 XL/XT [Radeon RX Vega 56/64] (rev c1) (prog-if 00 [VGA controller]) Subsystem: Gigabyte Technology Co., Ltd Vega 10 XL/XT [Radeon RX Vega 56/64] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 95 NUMA node: 1 Region 0: Memory at 80000000 (64-bit, prefetchable) [size=256M] Region 2: Memory at 90000000 (64-bit, prefetchable) [size=2M] Region 4: I/O ports at 2000 [size=256] Region 5: Memory at 9f300000 (32-bit, non-prefetchable) [size=512K] Expansion ROM at 000c0000 [disabled] [size=128K] Capabilities: [48] Vendor Specific Information: Len=08 <?> Capabilities: [50] Power Management version 3 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1+,D2+,D3hot+,D3cold+) Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME- Capabilities: [64] Express (v2) Legacy Endpoint, MSI 00 DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s <4us, L1 unlimited ExtTag+ AttnBtn- AttnInd- PwrInd- RBE+ FLReset- DevCtl: CorrErr- NonFatalErr- FatalErr- UnsupReq- RlxdOrd+ ExtTag+ PhantFunc- AuxPwr- NoSnoop+ MaxPayload 256 bytes, MaxReadReq 512 bytes DevSta: CorrErr+ NonFatalErr- FatalErr- UnsupReq+ AuxPwr- TransPend- LnkCap: Port #0, Speed 8GT/s, Width x16, ASPM L0s L1, Exit Latency L0s <64ns, L1 <1us ClockPM- Surprise- LLActRep- BwNot- ASPMOptComp+ LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- CommClk+ ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed 8GT/s (ok), Width x16 (ok) TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt- DevCap2: Completion Timeout: Not Supported, TimeoutDis-, LTR+, OBFF Not Supported AtomicOpsCap: 32bit- 64bit- 128bitCAS- DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-, LTR-, OBFF Disabled AtomicOpsCtl: ReqEn+ LnkCtl2: Target Link Speed: 8GT/s, EnterCompliance- SpeedDis- Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS- Compliance De-emphasis: -6dB LnkSta2: Current De-emphasis Level: -3.5dB, EqualizationComplete+, EqualizationPhase1+ EqualizationPhase2+, EqualizationPhase3+, LinkEqualizationRequest- Capabilities: [a0] MSI: Enable+ Count=1/1 Maskable- 64bit+ Address: 00000000fee15000 Data: 4022 Capabilities: [100 v1] Vendor Specific Information: ID=0001 Rev=1 Len=010 <?> Capabilities: [150 v2] Advanced Error Reporting UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol- UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol- UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol- CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- AdvNonFatalErr+ CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- AdvNonFatalErr+ AERCap: First Error Pointer: 00, ECRCGenCap+ ECRCGenEn- ECRCChkCap+ ECRCChkEn- MultHdrRecCap- MultHdrRecEn- TLPPfxPres- HdrLogCap- HeaderLog: 00000000 00000000 00000000 00000000 Capabilities: [200 v1] Resizable BAR <?> Capabilities: [270 v1] Secondary PCI Express <?> Capabilities: [2a0 v1] Access Control Services ACSCap: SrcValid- TransBlk- ReqRedir- CmpltRedir- UpstreamFwd- EgressCtrl- DirectTrans- ACSCtl: SrcValid- TransBlk- ReqRedir- CmpltRedir- UpstreamFwd- EgressCtrl- DirectTrans- Capabilities: [2b0 v1] Address Translation Service (ATS) ATSCap: Invalidate Queue Depth: 00 ATSCtl: Enable-, Smallest Translation Unit: 00 Capabilities: [2c0 v1] Page Request Interface (PRI) PRICtl: Enable- Reset- PRISta: RF- UPRGI- Stopped+ Page Request Capacity: 00000020, Page Request Allocation: 00000000 Capabilities: [2d0 v1] Process Address Space ID (PASID) PASIDCap: Exec+ Priv+, Max PASID Width: 10 PASIDCtl: Enable- Exec- Priv- Capabilities: [320 v1] Latency Tolerance Reporting Max snoop latency: 0ns Max no snoop latency: 0ns Kernel driver in use: amdgpu Kernel modules: amdgpu

lsb_release -a

Code: Select all: No LSB modules are available. Distributor ID: Debian Description: Debian GNU/Linux bullseye/sid Release: testing Codename: bullseye

dpkg -l | egrep -i 'opencl|mesa|drm|amdgpu'

Code: Select all: ii amdgpu-core 19.20-812932 all Core meta package for unified amdgpu driver. ii amdgpu-pro-core 19.20-812932 all Core meta package for Pro components of the unified amdgpu driver. ii amdgpu-pro-pin 19.20-812932 all Meta package to pin a specific amdgpu driver version. ii clinfo-amdgpu-pro 19.20-812932 amd64 AMD OpenCL info utility ii libdrm-amdgpu-amdgpu1:amd64 1:2.4.97-812932 amd64 Userspace interface to amdgpu-specific kernel DRM services -- runtime ii libdrm-amdgpu-common 1.0.0-812932 all List of AMD/ATI cards' device IDs, revision IDs and marketing names ii libdrm-amdgpu1:amd64 2.4.97-1 amd64 Userspace interface to amdgpu-specific kernel DRM services -- runtime ii libdrm-amdgpu1:i386 2.4.97-1 i386 Userspace interface to amdgpu-specific kernel DRM services -- runtime ii libdrm-common 2.4.97-1 all Userspace interface to kernel DRM services -- common files ii libdrm-intel1:amd64 2.4.97-1 amd64 Userspace interface to intel-specific kernel DRM services -- runtime ii libdrm-intel1:i386 2.4.97-1 i386 Userspace interface to intel-specific kernel DRM services -- runtime ii libdrm-nouveau2:amd64 2.4.97-1 amd64 Userspace interface to nouveau-specific kernel DRM services -- runtime ii libdrm-nouveau2:i386 2.4.97-1 i386 Userspace interface to nouveau-specific kernel DRM services -- runtime ii libdrm-radeon1:amd64 2.4.97-1 amd64 Userspace interface to radeon-specific kernel DRM services -- runtime ii libdrm-radeon1:i386 2.4.97-1 i386 Userspace interface to radeon-specific kernel DRM services -- runtime ii libdrm2:amd64 2.4.97-1 amd64 Userspace interface to kernel DRM services -- runtime ii libdrm2:i386 2.4.97-1 i386 Userspace interface to kernel DRM services -- runtime ii libdrm2-amdgpu:amd64 1:2.4.97-812932 amd64 Userspace interface to kernel DRM services -- runtime ii libegl-mesa0:amd64 18.3.6-2 amd64 free implementation of the EGL API -- Mesa vendor library ii libegl1-mesa:amd64 18.3.6-2 amd64 transitional dummy package ii libgl1-mesa-dri:amd64 18.3.6-2 amd64 free implementation of the OpenGL API -- DRI modules ii libgl1-mesa-dri:i386 18.3.6-2 i386 free implementation of the OpenGL API -- DRI modules ii libgl1-mesa-glx:i386 18.3.6-2 i386 transitional dummy package ii libglapi-mesa:amd64 19.1.2-1 amd64 free implementation of the GL API -- shared library ii libglapi-mesa:i386 19.1.2-1 i386 free implementation of the GL API -- shared library ii libglu1-mesa:amd64 9.0.0-2.1+b3 amd64 Mesa OpenGL utility library (GLU) ii libglx-mesa0:amd64 19.1.2-1 amd64 free implementation of the OpenGL API -- GLX vendor library ii libglx-mesa0:i386 19.1.2-1 i386 free implementation of the OpenGL API -- GLX vendor library ii libopencl1-amdgpu-pro:amd64 19.20-812932 amd64 AMD OpenCL ICD Loader library ii libva-drm2:amd64 2.5.0-1 amd64 Video Acceleration (VA) API for Linux -- DRM runtime ii mesa-utils 8.4.0-1+b1 amd64 Miscellaneous Mesa GL utilities ii mesa-va-drivers:amd64 18.3.6-2 amd64 Mesa VA-API video acceleration drivers ii mesa-vdpau-drivers:amd64 18.3.6-2 amd64 Mesa VDPAU video acceleration drivers ii mesa-vulkan-drivers:amd64 18.3.6-2 amd64 Mesa Vulkan graphics drivers ii ocl-icd-libopencl1:amd64 2.2.12-2 amd64 Generic OpenCL ICD Loader ii opencl-amdgpu-pro-icd 19.20-812932 amd64 non-free AMD OpenCL ICD Loaders ii opencl-orca-amdgpu-pro-icd:amd64 19.20-812932 amd64 non-free AMD OpenCL ICD Loaders ii xserver-xorg-video-amdgpu 19.0.1-1 amd64 X.Org X server -- AMDGPU display driver

uname -a

Code: Select all: Linux chiquitin 5.0.0-trunk-amd64 #1 SMP Debian 5.0.2-1~exp1 (2019-03-18) x86_64 GNU/Linux

/opt/amdgpu-pro/bin/clinfo

Code: Select all: Number of platforms: 1 Platform Profile: FULL_PROFILE Platform Version: OpenCL 2.1 AMD-APP (2841.17) Platform Name: AMD Accelerated Parallel Processing Platform Vendor: Advanced Micro Devices, Inc. Platform Extensions: cl_khr_icd cl_amd_event_callback cl_amd_offline_devices Platform Name: AMD Accelerated Parallel Processing Number of devices: 1 Device Type: CL_DEVICE_TYPE_GPU Vendor ID: 1002h Board name: Radeon RX Vega Device Topology: PCI[ B#67, D#0, F#0 ] Max compute units: 64 Max work items dimensions: 3 Max work items[0]: 1024 Max work items[1]: 1024 Max work items[2]: 1024 Max work group size: 256 Preferred vector width char: 4 Preferred vector width short: 2 Preferred vector width int: 1 Preferred vector width long: 1 Preferred vector width float: 1 Preferred vector width double: 1 Native vector width char: 4 Native vector width short: 2 Native vector width int: 1 Native vector width long: 1 Native vector width float: 1 Native vector width double: 1 Max clock frequency: 1630Mhz Address bits: 64 Max memory allocation: 4244635648 Image support: Yes Max number of images read arguments: 128 Max number of images write arguments: 64 Max image 2D width: 16384 Max image 2D height: 16384 Max image 3D width: 2048 Max image 3D height: 2048 Max image 3D depth: 2048 Max samplers within kernel: 16 Max size of kernel argument: 1024 Alignment (bits) of base address: 2048 Minimum alignment (bytes) for any datatype: 128 Single precision floating point capability Denorms: No Quiet NaNs: Yes Round to nearest even: Yes Round to zero: Yes Round to +ve and infinity: Yes IEEE754-2008 fused multiply-add: Yes Cache type: Read/Write Cache line size: 64 Cache size: 16384 Global memory size: 8573157376 Constant buffer size: 4244635648 Max number of constant args: 8 Local memory type: Scratchpad Local memory size: 65536 Max pipe arguments: 16 Max pipe active reservations: 16 Max pipe packet size: 4244635648 Max global variable size: 3820172032 Max global variable preferred total size: 8573157376 Max read/write image args: 64 Max on device events: 1024 Queue on device max size: 8388608 Max on device queues: 1 Queue on device preferred size: 262144 SVM capabilities: Coarse grain buffer: Yes Fine grain buffer: Yes Fine grain system: No Atomics: No Preferred platform atomic alignment: 0 Preferred global atomic alignment: 0 Preferred local atomic alignment: 0 Kernel Preferred work group size multiple: 64 Error correction support: 0 Unified memory for Host and Device: 0 Profiling timer resolution: 1 Device endianess: Little Available: Yes Compiler available: Yes Execution capabilities: Execute OpenCL kernels: Yes Execute native function: No Queue on Host properties: Out-of-Order: No Profiling : Yes Queue on Device properties: Out-of-Order: Yes Profiling : Yes Platform ID: 0x7f4a3cf1c1b0 Name: gfx900 Vendor: Advanced Micro Devices, Inc. Device OpenCL C version: OpenCL C 2.0 Driver version: 2841.17 (PAL,HSAIL) Profile: FULL_PROFILE Version: OpenCL 2.0 AMD-APP (2841.17) Extensions: cl_khr_fp64 cl_amd_fp64 cl_khr_global_int32_base_atomics cl_khr_global_int32_extended_atomics cl_khr_local_int32_base_atomics cl_khr_local_int32_extended_atomics cl_khr_int64_base_atomics cl_khr_int64_extended_atomics cl_khr_3d_image_writes cl_khr_byte_addressable_store cl_khr_fp16 cl_khr_gl_sharing cl_khr_gl_depth_images cl_amd_device_attribute_query cl_amd_vec3 cl_amd_printf cl_amd_media_ops cl_amd_media_ops2 cl_amd_popcnt cl_khr_image2d_from_buffer cl_khr_spir cl_khr_subgroups cl_khr_gl_event cl_khr_depth_images cl_khr_mipmap_image cl_khr_mipmap_image_writes

Thu Jul 25, 2019 3:08 pm

Hi, I see you have rocm 2.1
Did you tried any other version?
I'm on Ubuntu 18.04.2 stock with rocm 2.5 installed with the dkms method and basically all is good

But with kernel newer than 4.18 I think it needs to be installed via the "upstream kernel method"

It took me a while to find a combo that fully work and is stable

Sat Jul 27, 2019 5:21 pm

I'm happy to report that I've done a clean install of Ubuntu 18.04.2 to give amdgpu-pro 19.30 driver a try and everything is working perfectly now. At full speed

For those that want to give a try, it can be downloaded from AMD, while you indicate your gpu as an RX5700, otherwise the webpage will give you 19.20 download link

I have a Vega56 and is working at full throttle now, had rocm 2.5 and while working fine was crippling card performance, somewhat limiting it (the card was running at lower temps)

from amdgpu-pro you only need the openCL compute bits, so install with the --headless flag, otherwise Fusion viewer will not work.

Standard candle:
66 blur 9fps
30 blur 21fps
18 blur 34fps
9 blur 59fps

6TNR 15fps
4TNR 20fps
2TNR 30fps
1TNR 47fps

noticed in some clip with time warp slowmo went from rendering at 1-1.5fps to 3-4.5fps
This while having a 165W powercap.
Is a standard MSI airboost vega56, no OC

Sun Aug 04, 2019 4:26 pm

Anybody able to help me on this one?

I have previously been able to install and run both 15 and 16 beta. However, because my GeForce GTX 570 didn't have the required grunt, neither version would really work properly.
So, I've just installed a GeForce GTX 1060 6GB/PCIe/SSE2 in a 23.5 GiB Intel® Core™ i7-3770K CPU @ 3.50GHz × 8 running Ubuntu 19.04, GNOME 3.32.1, OS type 64-bit, 1.0 TB SSD.
I've also installed the Ubuntu Studio Controls, along with the low latency stuff that comes with that, for my audio applications.
I can, apparently successfully, install both 15 and 16b. Each go through every screen and stage of the install as normal. However, when I attempt to launch Resolve, its title shows up in the top menu bar (next to 'Activities'), and I get a turning wheel to indicate that something is happening, but then it just stops turning and nothing further happens. No splash screen, nothing.
I've tried both the 390 and 418.56 NVIDIA Drivers, to no avail.
Anyone out there who can suggest something?
Cheers,
Alan

Mon Aug 05, 2019 7:19 pm

acurrall wrote:Anybody able to help me on this one?

I have previously been able to install and run both 15 and 16 beta. However, because my GeForce GTX 570 didn't have the required grunt, neither version would really work properly.
So, I've just installed a GeForce GTX 1060 6GB/PCIe/SSE2 in a 23.5 GiB Intel® Core™ i7-3770K CPU @ 3.50GHz × 8 running Ubuntu 19.04, GNOME 3.32.1, OS type 64-bit, 1.0 TB SSD.
I've also installed the Ubuntu Studio Controls, along with the low latency stuff that comes with that, for my audio applications.
I can, apparently successfully, install both 15 and 16b. Each go through every screen and stage of the install as normal. However, when I attempt to launch Resolve, its title shows up in the top menu bar (next to 'Activities'), and I get a turning wheel to indicate that something is happening, but then it just stops turning and nothing further happens. No splash screen, nothing.
I've tried both the 390 and 418.56 NVIDIA Drivers, to no avail.
Anyone out there who can suggest something?
Cheers,
Alan

Try launching resolve from the Terminal and look for clues. Should be in `/opt/resolve/bin`.

Tue Aug 06, 2019 8:30 am

Seth Goldin wrote:
acurrall wrote:Anybody able to help me on this one?

I have previously been able to install and run both 15 and 16 beta. However, because my GeForce GTX 570 didn't have the required grunt, neither version would really work properly.
So, I've just installed a GeForce GTX 1060 6GB/PCIe/SSE2 in a 23.5 GiB Intel® Core™ i7-3770K CPU @ 3.50GHz × 8 running Ubuntu 19.04, GNOME 3.32.1, OS type 64-bit, 1.0 TB SSD.
I've also installed the Ubuntu Studio Controls, along with the low latency stuff that comes with that, for my audio applications.
I can, apparently successfully, install both 15 and 16b. Each go through every screen and stage of the install as normal. However, when I attempt to launch Resolve, its title shows up in the top menu bar (next to 'Activities'), and I get a turning wheel to indicate that something is happening, but then it just stops turning and nothing further happens. No splash screen, nothing.
I've tried both the 390 and 418.56 NVIDIA Drivers, to no avail.
Anyone out there who can suggest something?
Cheers,
Alan

Try launching resolve from the Terminal and look for clues. Should be in `/opt/resolve/bin`.

Thanks Seth, I'll try that. However, I've also realised that the minimum specs call for 32GB RAM, and I only have 24GB. I've ordered some more to meet the spec. Hopefully this will be the issue.
Cheers
Alan

Wed Aug 07, 2019 2:55 pm

acurrall wrote:
Seth Goldin wrote:
acurrall wrote:Anybody able to help me on this one?

I have previously been able to install and run both 15 and 16 beta. However, because my GeForce GTX 570 didn't have the required grunt, neither version would really work properly.
So, I've just installed a GeForce GTX 1060 6GB/PCIe/SSE2 in a 23.5 GiB Intel® Core™ i7-3770K CPU @ 3.50GHz × 8 running Ubuntu 19.04, GNOME 3.32.1, OS type 64-bit, 1.0 TB SSD.
I've also installed the Ubuntu Studio Controls, along with the low latency stuff that comes with that, for my audio applications.
I can, apparently successfully, install both 15 and 16b. Each go through every screen and stage of the install as normal. However, when I attempt to launch Resolve, its title shows up in the top menu bar (next to 'Activities'), and I get a turning wheel to indicate that something is happening, but then it just stops turning and nothing further happens. No splash screen, nothing.
I've tried both the 390 and 418.56 NVIDIA Drivers, to no avail.
Anyone out there who can suggest something?
Cheers,
Alan

Try launching resolve from the Terminal and look for clues. Should be in `/opt/resolve/bin`.

Thanks Seth, I'll try that. However, I've also realised that the minimum specs call for 32GB RAM, and I only have 24GB. I've ordered some more to meet the spec. Hopefully this will be the issue.
Cheers
Alan

Okay, I've installed 32GB memory, and tried launching Resolve from Terminal as suggested by Seth. Now I get this error message in the terminal:
"/opt/resolve/bin/resolve: error while loading shared libraries: libOpenCL.so.1: cannot open shared object file: No such file or directory"
Any suggestions as to where I go from here?
Cheers for any advice,
Alan

Wed Aug 07, 2019 4:53 pm

acurrall wrote:"/opt/resolve/bin/resolve: error while loading shared libraries: libOpenCL.so.1: cannot open shared object file: No such file or directory"

most likely you have to install the nvidea opencl libraries and tools on your machine...
on debian the relevant packages would be: 'nvidia-opencl-common' and 'nvidia-opencl-icd'

Thu Aug 08, 2019 7:51 pm

Martin Schitter wrote:
acurrall wrote:"/opt/resolve/bin/resolve: error while loading shared libraries: libOpenCL.so.1: cannot open shared object file: No such file or directory"

most likely you have to install the nvidea opencl libraries and tools on your machine...
on debian the relevant packages would be: 'nvidia-opencl-common' and 'nvidia-opencl-icd'

Thanks Martin, I found another reference to this issue further back on this thread, and followed the advice give. It seems to wok okay now.

Fri Aug 09, 2019 3:32 pm

Here's a heads-up to folks on CentOS 7.6 right now who are dependent on ELRepo for the 430.40 NVIDIA driver.

I noticed a package update available for kmod-nvidia-430.40-2.el7_7.elrepo (64-bit). However, updating it on CentOS 7.6 right now throws the following dependency errors:

Code: Select all: kmod-nvidia-430.40-2.el7_7.elrepo.x86_64 requires kernel(drm_modeset_unlock_all) = 0xced69203 kmod-nvidia-430.40-2.el7_7.elrepo.x86_64 requires kernel(drm_object_property_set_value) = 0x88b38c6c kmod-nvidia-430.40-2.el7_7.elrepo.x86_64 requires kernel(drm_mode_set_name) = 0x33d120a0 kmod-nvidia-430.40-2.el7_7.elrepo.x86_64 requires kernel(drm_atomic_state_default_clear) = 0x3e906b84 kmod-nvidia-430.40-2.el7_7.elrepo.x86_64 requires kernel(drm_atomic_helper_plane_reset) = 0xb2d2ba3b kmod-nvidia-430.40-2.el7_7.elrepo.x86_64 requires kernel(drm_gem_handle_create) = 0x39c33912 kmod-nvidia-430.40-2.el7_7.elrepo.x86_64 requires kernel(drm_connector_attach_encoder) = 0xd5050155 kmod-nvidia-430.40-2.el7_7.elrepo.x86_64 requires kernel(drm_gem_object_put_unlocked) = 0x1ae7df04 kmod-nvidia-430.40-2.el7_7.elrepo.x86_64 requires kernel(drm_atomic_helper_page_flip) = 0xda846989 kmod-nvidia-430.40-2.el7_7.elrepo.x86_64 requires kernel(drm_crtc_cleanup) = 0xacc58df4 kmod-nvidia-430.40-2.el7_7.elrepo.x86_64 requires kernel(d... : Success - empty transaction

That's because ELRepo is built for RHEL, which just released 7.7. There's a little bit of a lag between when RHEL 7.7 is released and when CentOS 7.7 will be ready. Historically, with minor releases like this, it's been maybe a week or so, according to this thread: https://www.centos.org/forums/viewtopic ... f819849dcc

If you notice a request from ELRepo to update from el7_6 to el7_7, you may want to hold off until you're actually running CentOS 7.7. I already grabbed 430.40 from el7_6, so I'm all set, but I presume the updates won't work until I get onto 7.7.

Fri Aug 09, 2019 4:03 pm

quickly tried both newly released versions
16 works fine
16.1b1 refuses to start with my config (Ubuntu 18.04, amdgpu-pro 19.30 opencl on top of mesa, r7 1700, 32gb, Vega56)

need to further investigate why but seems... guess it... gpu driver related

Fri Aug 09, 2019 8:55 pm

Seth Goldin wrote:Here's a heads-up to folks on CentOS 7.6 right now who are dependent on ELRepo for the 430.40 NVIDIA driver.

I noticed a package update available for kmod-nvidia-430.40-2.el7_7.elrepo (64-bit). However, updating it on CentOS 7.6 right now throws the following dependency errors:
Code: Select all
kmod-nvidia-430.40-2.el7_7.elrepo.x86_64 requires kernel(drm_modeset_unlock_all) = 0xced69203 kmod-nvidia-430.40-2.el7_7.elrepo.x86_64 requires kernel(drm_object_property_set_value) = 0x88b38c6c kmod-nvidia-430.40-2.el7_7.elrepo.x86_64 requires kernel(drm_mode_set_name) = 0x33d120a0 kmod-nvidia-430.40-2.el7_7.elrepo.x86_64 requires kernel(drm_atomic_state_default_clear) = 0x3e906b84 kmod-nvidia-430.40-2.el7_7.elrepo.x86_64 requires kernel(drm_atomic_helper_plane_reset) = 0xb2d2ba3b kmod-nvidia-430.40-2.el7_7.elrepo.x86_64 requires kernel(drm_gem_handle_create) = 0x39c33912 kmod-nvidia-430.40-2.el7_7.elrepo.x86_64 requires kernel(drm_connector_attach_encoder) = 0xd5050155 kmod-nvidia-430.40-2.el7_7.elrepo.x86_64 requires kernel(drm_gem_object_put_unlocked) = 0x1ae7df04 kmod-nvidia-430.40-2.el7_7.elrepo.x86_64 requires kernel(drm_atomic_helper_page_flip) = 0xda846989 kmod-nvidia-430.40-2.el7_7.elrepo.x86_64 requires kernel(drm_crtc_cleanup) = 0xacc58df4 kmod-nvidia-430.40-2.el7_7.elrepo.x86_64 requires kernel(d... : Success - empty transaction

That's because ELRepo is built for RHEL, which just released 7.7. There's a little bit of a lag between when RHEL 7.7 is released and when CentOS 7.7 will be ready. Historically, with minor releases like this, it's been maybe a week or so, according to this thread: https://www.centos.org/forums/viewtopic ... f819849dcc

If you notice a request from ELRepo to update from el7_6 to el7_7, you may want to hold off until you're actually running CentOS 7.7. I already grabbed 430.40 from el7_6, so I'm all set, but I presume the updates won't work until I get onto 7.7.

I should add some helpful advice from the ELRepo developers. It's best practice to just install elrepo-release-7.0-4.el7.elrepo whenever yum prompts you to do so. It's not actually specific to any particular release of RHEL or CentOS.

However, if you go ahead and also install yum-plugin-elrepo.noarch, the yum plugin will automatically hide any packages requiring a newer kernel on systems where that newer kernel is not yet available. Then as
soon as that newer kernel becomes available, for example, when the system is updated to CentOS 7.7, yum will automatically find the kmod packages specific to the newer kernel in CentOS 7.7 that need updating. Nice, clean, and easy!

Mon Aug 12, 2019 8:09 am

VST Plugins still not working in Resolve Studio 16 Linux

I hope they will fix this soon.

Mon Aug 12, 2019 7:56 pm

Hello guys,

I installed version 15 via both .deb and .run and no works. Below some logs.

Code: Select all: cat crash_archive.txt ---------------------------------------------------------------------- #TIME Mon Aug 12 16:50:25 2019 - Uptime 00:00:00 (hh:mm:ss) #PROGRAM_NAME DaVinci Resolve v16.0.0.060 (Linux/Clang) bin/resolve() [0x509f8b9] bin/resolve() [0x509f0aa] /lib/x86_64-linux-gnu/libpthread.so.0(+0x12890) [0x7fa8f645b890] /lib/x86_64-linux-gnu/libc.so.6(gsignal+0xc7) [0x7fa8f4490e97] /lib/x86_64-linux-gnu/libc.so.6(abort+0x141) [0x7fa8f4492801] bin/resolve(_ZN9__gnu_cxx27__verbose_terminate_handlerEv+0x15d) [0x710b67d] /opt/resolve/bin/../libs/libc++abi.so.1(+0x22036) [0x7fa926bfe036] /opt/resolve/bin/../libs/libc++abi.so.1(+0x219d7) [0x7fa926bfd9d7] bin/resolve() [0x1dfce6c] bin/resolve() [0x1dfc639] bin/resolve() [0x1df62cc] bin/resolve() [0x1dc512b] bin/resolve() [0x1dc241e] bin/resolve() [0x1dc0e72] bin/resolve() [0x1dc0718] bin/resolve() [0x1dd47d5] bin/resolve() [0x1dbc2ff] /lib/x86_64-linux-gnu/libc.so.6(__libc_start_main+0xe7) [0x7fa8f4473b97] bin/resolve() [0x1dbb10d] Signal Number = 6 ---------------------------------------------------------------------- #TIME Mon Aug 12 16:50:25 2019 - Uptime 00:00:00 (hh:mm:ss) #PROGRAM_NAME DaVinci Resolve v16.0.0.060 (Linux/Clang) bin/resolve() [0x509f8b9] bin/resolve() [0x509f0aa] /lib/x86_64-linux-gnu/libpthread.so.0(+0x12890) [0x7fa8f645b890] /lib/x86_64-linux-gnu/libc.so.6(gsignal+0xc7) [0x7fa8f4490e97] /lib/x86_64-linux-gnu/libc.so.6(abort+0x141) [0x7fa8f4492801] bin/resolve(_ZN9__gnu_cxx27__verbose_terminate_handlerEv+0xed) [0x710b60d] /opt/resolve/bin/../libs/libc++abi.so.1(+0x22036) [0x7fa926bfe036] /opt/resolve/bin/../libs/libc++abi.so.1(+0x223a1) [0x7fa926bfe3a1] /opt/resolve/bin/../libs/libc++abi.so.1(+0x228f7) [0x7fa926bfe8f7] /opt/resolve/bin/../libs/libc++abi.so.1(__gxx_personality_v0+0x6c) [0x7fa926bfeddc] /lib/x86_64-linux-gnu/libgcc_s.so.1(_Unwind_RaiseException+0x14b) [0x7fa8f4853a0b] /opt/resolve/bin/../libs/libc++abi.so.1(__cxa_throw+0x66) [0x7fa926bfd9c6] bin/resolve() [0x1dfce6c] bin/resolve() [0x1dfc639] bin/resolve() [0x1df62cc] bin/resolve() [0x1dc512b] bin/resolve() [0x1dc241e] bin/resolve() [0x1dc0e72] bin/resolve() [0x1dc0718] bin/resolve() [0x1df7ace] bin/resolve() [0x509f465] /lib/x86_64-linux-gnu/libpthread.so.0(+0x12890) [0x7fa8f645b890] /lib/x86_64-linux-gnu/libc.so.6(gsignal+0xc7) [0x7fa8f4490e97] /lib/x86_64-linux-gnu/libc.so.6(abort+0x141) [0x7fa8f4492801] bin/resolve(_ZN9__gnu_cxx27__verbose_terminate_handlerEv+0x15d) [0x710b67d] /opt/resolve/bin/../libs/libc++abi.so.1(+0x22036) [0x7fa926bfe036] /opt/resolve/bin/../libs/libc++abi.so.1(+0x219d7) [0x7fa926bfd9d7] bin/resolve() [0x1dfce6c] bin/resolve() [0x1dfc639] bin/resolve() [0x1df62cc] bin/resolve() [0x1dc512b] bin/resolve() [0x1dc241e] bin/resolve() [0x1dc0e72] bin/resolve() [0x1dc0718] bin/resolve() [0x1dd47d5] bin/resolve() [0x1dbc2ff] /lib/x86_64-linux-gnu/libc.so.6(__libc_start_main+0xe7) [0x7fa8f4473b97] bin/resolve() [0x1dbb10d] Signal Number = 6

Code: Select all: cat ResolveDebug.txt [0x7fa8ec592b00] | Main | INFO | 2019-08-12 16:50:25,946 | Running DaVinci Resolve v16.0.0.060 (Linux/Clang) [0x7fa8ec592b00] | Main | INFO | 2019-08-12 16:50:25,947 | Updating display GPU information... OpenCL error -1001: 'Unspecified Error', GPUPropertiesUtilUnix.cpp:338. terminate called after throwing an instance of 'ReactorGPU::GPUException' ==========[CRASH DUMP]========== Please send this to support: #TIME Mon Aug 12 16:50:25 2019 - Uptime 00:00:00 (hh:mm:ss) #PROGRAM_NAME DaVinci Resolve v16.0.0.060 (Linux/Clang) bin/resolve() [0x509f8b9] bin/resolve() [0x509f0aa] /lib/x86_64-linux-gnu/libpthread.so.0(+0x12890) [0x7fa8f645b890] /lib/x86_64-linux-gnu/libc.so.6(gsignal+0xc7) [0x7fa8f4490e97] /lib/x86_64-linux-gnu/libc.so.6(abort+0x141) [0x7fa8f4492801] bin/resolve(_ZN9__gnu_cxx27__verbose_terminate_handlerEv+0x15d) [0x710b67d] /opt/resolve/bin/../libs/libc++abi.so.1(+0x22036) [0x7fa926bfe036] /opt/resolve/bin/../libs/libc++abi.so.1(+0x219d7) [0x7fa926bfd9d7] bin/resolve() [0x1dfce6c] bin/resolve() [0x1dfc639] bin/resolve() [0x1df62cc] bin/resolve() [0x1dc512b] bin/resolve() [0x1dc241e] bin/resolve() [0x1dc0e72] bin/resolve() [0x1dc0718] bin/resolve() [0x1dd47d5] bin/resolve() [0x1dbc2ff] /lib/x86_64-linux-gnu/libc.so.6(__libc_start_main+0xe7) [0x7fa8f4473b97] bin/resolve() [0x1dbb10d] Signal Number = 6 ================================ [0x7fa8ec592b00] | Main | INFO | 2019-08-12 16:50:25,948 | Updating display GPU information... OpenCL error -1001: 'Unspecified Error', GPUPropertiesUtilUnix.cpp:338. terminate called recursively ==========[CRASH DUMP]========== Please send this to support: #TIME Mon Aug 12 16:50:25 2019 - Uptime 00:00:00 (hh:mm:ss) #PROGRAM_NAME DaVinci Resolve v16.0.0.060 (Linux/Clang) bin/resolve() [0x509f8b9] bin/resolve() [0x509f0aa] /lib/x86_64-linux-gnu/libpthread.so.0(+0x12890) [0x7fa8f645b890] /lib/x86_64-linux-gnu/libc.so.6(gsignal+0xc7) [0x7fa8f4490e97] /lib/x86_64-linux-gnu/libc.so.6(abort+0x141) [0x7fa8f4492801] bin/resolve(_ZN9__gnu_cxx27__verbose_terminate_handlerEv+0xed) [0x710b60d] /opt/resolve/bin/../libs/libc++abi.so.1(+0x22036) [0x7fa926bfe036] /opt/resolve/bin/../libs/libc++abi.so.1(+0x223a1) [0x7fa926bfe3a1] /opt/resolve/bin/../libs/libc++abi.so.1(+0x228f7) [0x7fa926bfe8f7] /opt/resolve/bin/../libs/libc++abi.so.1(__gxx_personality_v0+0x6c) [0x7fa926bfeddc] /lib/x86_64-linux-gnu/libgcc_s.so.1(_Unwind_RaiseException+0x14b) [0x7fa8f4853a0b] /opt/resolve/bin/../libs/libc++abi.so.1(__cxa_throw+0x66) [0x7fa926bfd9c6] bin/resolve() [0x1dfce6c] bin/resolve() [0x1dfc639] bin/resolve() [0x1df62cc] bin/resolve() [0x1dc512b] bin/resolve() [0x1dc241e] bin/resolve() [0x1dc0e72] bin/resolve() [0x1dc0718] bin/resolve() [0x1df7ace] bin/resolve() [0x509f465] /lib/x86_64-linux-gnu/libpthread.so.0(+0x12890) [0x7fa8f645b890] /lib/x86_64-linux-gnu/libc.so.6(gsignal+0xc7) [0x7fa8f4490e97] /lib/x86_64-linux-gnu/libc.so.6(abort+0x141) [0x7fa8f4492801] bin/resolve(_ZN9__gnu_cxx27__verbose_terminate_handlerEv+0x15d) [0x710b67d] /opt/resolve/bin/../libs/libc++abi.so.1(+0x22036) [0x7fa926bfe036] /opt/resolve/bin/../libs/libc++abi.so.1(+0x219d7) [0x7fa926bfd9d7] bin/resolve() [0x1dfce6c] bin/resolve() [0x1dfc639] bin/resolve() [0x1df62cc] bin/resolve() [0x1dc512b] bin/resolve() [0x1dc241e] bin/resolve() [0x1dc0e72] bin/resolve() [0x1dc0718] bin/resolve() [0x1dd47d5] bin/resolve() [0x1dbc2ff] /lib/x86_64-linux-gnu/libc.so.6(__libc_start_main+0xe7) [0x7fa8f4473b97] bin/resolve() [0x1dbb10d] Signal Number = 6

Code: Select all: # lspci 00:00.0 Host bridge: Intel Corporation Xeon E3-1200 v5/E3-1500 v5/6th Gen Core Processor Host Bridge/DRAM Registers (rev 07) 00:01.0 PCI bridge: Intel Corporation Xeon E3-1200 v5/E3-1500 v5/6th Gen Core Processor PCIe Controller (x16) (rev 07) 00:02.0 VGA compatible controller: Intel Corporation HD Graphics 530 (rev 06) 00:14.0 USB controller: Intel Corporation 100 Series/C230 Series Chipset Family USB 3.0 xHCI Controller (rev 31) 00:14.2 Signal processing controller: Intel Corporation 100 Series/C230 Series Chipset Family Thermal Subsystem (rev 31) 00:16.0 Communication controller: Intel Corporation 100 Series/C230 Series Chipset Family MEI Controller #1 (rev 31) 00:17.0 SATA controller: Intel Corporation Q170/Q150/B150/H170/H110/Z170/CM236 Chipset SATA Controller [AHCI Mode] (rev 31) 00:1c.0 PCI bridge: Intel Corporation 100 Series/C230 Series Chipset Family PCI Express Root Port #5 (rev f1) 00:1f.0 ISA bridge: Intel Corporation H110 Chipset LPC/eSPI Controller (rev 31) 00:1f.2 Memory controller: Intel Corporation 100 Series/C230 Series Chipset Family Power Management Controller (rev 31) 00:1f.3 Audio device: Intel Corporation 100 Series/C230 Series Chipset Family HD Audio Controller (rev 31) 00:1f.4 SMBus: Intel Corporation 100 Series/C230 Series Chipset Family SMBus (rev 31) 02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 15)

Code: Select all: # lspci -vv -s 00:02.0 00:02.0 VGA compatible controller: Intel Corporation HD Graphics 530 (rev 06) (prog-if 00 [VGA controller]) Subsystem: Dell HD Graphics 530 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 127 Region 0: Memory at f6000000 (64-bit, non-prefetchable) [size=16M] Region 2: Memory at e0000000 (64-bit, prefetchable) [size=256M] Region 4: I/O ports at f000 [size=64] [virtual] Expansion ROM at 000c0000 [disabled] [size=128K] Capabilities: [40] Vendor Specific Information: Len=0c <?> Capabilities: [70] Express (v2) Root Complex Integrated Endpoint, MSI 00 DevCap: MaxPayload 128 bytes, PhantFunc 0 ExtTag- RBE+ DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- MaxPayload 128 bytes, MaxReadReq 128 bytes DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend- DevCap2: Completion Timeout: Not Supported, TimeoutDis-, LTR-, OBFF Not Supported DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-, LTR-, OBFF Disabled Capabilities: [ac] MSI: Enable+ Count=1/1 Maskable- 64bit- Address: fee00018 Data: 0000 Capabilities: [d0] Power Management version 2 Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Capabilities: [100 v1] Process Address Space ID (PASID) PASIDCap: Exec+ Priv-, Max PASID Width: 14 PASIDCtl: Enable- Exec- Priv- Capabilities: [200 v1] Address Translation Service (ATS) ATSCap: Invalidate Queue Depth: 00 ATSCtl: Enable-, Smallest Translation Unit: 00 Capabilities: [300 v1] Page Request Interface (PRI) PRICtl: Enable- Reset- PRISta: RF- UPRGI- Stopped- Page Request Capacity: 00008000, Page Request Allocation: 00000000 Kernel driver in use: i915 Kernel modules: i915

Code: Select all: # lsb_release -a No LSB modules are available. Distributor ID: Ubuntu Description: Educom Live CD Release: 18.04 Codename: bionic

Code: Select all: # dpkg -l | egrep -i 'opencl|mesa|drm|intel' ii i965-va-driver:amd64 2.1.0-0ubuntu1 amd64 VAAPI driver for Intel G45 & HD Graphics family ii intel-microcode 3.20190514.0ubuntu0.18.04.3 amd64 Processor microcode firmware for Intel CPUs ii iucode-tool 2.3.1-1 amd64 Intel processor microcode tool ii libcilkrts5:amd64 7.4.0-1ubuntu1~18.04 amd64 Intel Cilk Plus language extensions (runtime) ii libdrm-amdgpu1:amd64 2.4.95-1~18.04.1 amd64 Userspace interface to amdgpu-specific kernel DRM services -- runtime ii libdrm-common 2.4.95-1~18.04.1 all Userspace interface to kernel DRM services -- common files ii libdrm-intel1:amd64 2.4.95-1~18.04.1 amd64 Userspace interface to intel-specific kernel DRM services -- runtime ii libdrm-nouveau2:amd64 2.4.95-1~18.04.1 amd64 Userspace interface to nouveau-specific kernel DRM services -- runtime ii libdrm-radeon1:amd64 2.4.95-1~18.04.1 amd64 Userspace interface to radeon-specific kernel DRM services -- runtime ii libdrm2:amd64 2.4.95-1~18.04.1 amd64 Userspace interface to kernel DRM services -- runtime ii libegl-mesa0:amd64 18.2.8-0ubuntu0~18.04.2 amd64 free implementation of the EGL API -- Mesa vendor library ii libegl1-mesa:amd64 18.2.8-0ubuntu0~18.04.2 amd64 transitional dummy package ii libgl1-mesa-dri:amd64 18.2.8-0ubuntu0~18.04.2 amd64 free implementation of the OpenGL API -- DRI modules ii libgl1-mesa-glx:amd64 18.2.8-0ubuntu0~18.04.2 amd64 transitional dummy package ii libglapi-mesa:amd64 18.2.8-0ubuntu0~18.04.2 amd64 free implementation of the GL API -- shared library ii libglu1-mesa:amd64 9.0.0-2.1build1 amd64 Mesa OpenGL utility library (GLU) ii libglx-mesa0:amd64 18.2.8-0ubuntu0~18.04.2 amd64 free implementation of the OpenGL API -- GLX vendor library ii libmpx2:amd64 8.3.0-6ubuntu1~18.04 amd64 Intel memory protection extensions (runtime) ii libva-drm2:amd64 2.1.0-3 amd64 Video Acceleration (VA) API for Linux -- DRM runtime ii libwayland-egl1-mesa:amd64 18.2.8-0ubuntu0~18.04.2 amd64 transitional dummy package ii mesa-utils 8.4.0-1 amd64 Miscellaneous Mesa GL utilities ii mesa-va-drivers:amd64 18.2.8-0ubuntu0~18.04.2 amd64 Mesa VA-API video acceleration drivers ii mesa-vdpau-drivers:amd64 18.2.8-0ubuntu0~18.04.2 amd64 Mesa VDPAU video acceleration drivers ii ocl-icd-libopencl1:amd64 2.2.11-1ubuntu1 amd64 Generic OpenCL ICD Loader ii ocl-icd-opencl-dev:amd64 2.2.11-1ubuntu1 amd64 OpenCL development files ii opencl-c-headers 2.2~2018.02.21-gb5c3680-1 all OpenCL (Open Computing Language) C header files ii openclipart-svg 1:0.18+dfsg-14 all clip art in SVG format ii xserver-xorg-video-intel 2:2.99.917+git20171229-1 amd64 X.Org X server -- Intel i8xx, i9xx display driver

Code: Select all: # uname -a Linux lab04pc07-u 4.15.0-50-lowlatency #54-Ubuntu SMP PREEMPT Mon May 6 19:38:08 UTC 2019 x86_64 x86_64 x86_64 GNU/Linux

Mon Aug 12, 2019 9:17 pm

eliaspereira wrote:I installed version 15 via both .deb and .run and no works. Below some logs.

it looks like you do not have a more powerful nvida graphgic card in your computer -- isn't it?
unfortunately resolve for linux doesn't run on intel iGPUs without additional GPGPU acceleration.

Tue Aug 13, 2019 12:48 am

Martin Schitter wrote:it looks like you do not have a more powerful nvida graphgic card in your computer -- isn't it?

Exactly that! I have an integrated Intel Sky lake.

Martin Schitter wrote:unfortunately resolve for linux doesn't run on intel iGPUs without additional GPGPU acceleration.

Damn!!!

The strange thing is that right after installation and first run, in quick setup informs that my video card is weak, but that for some HD videos would work. Tomorrow I can check the message right, but at first it seems to be compatible ?!

Tue Aug 13, 2019 9:01 am

eliaspereira wrote:Damn!!! The strange thing is that right after installation and first run, in quick setup informs that my video card is weak, but that for some HD videos would work.

it's really a pity, that BMDs developer aren't able or willing to implement more useful error reports!

i really don't see, why users have to guess and ask on mailing list, if a simple popping up dialog box could explain the actual error resp. unfulfilled hardware requirement much more precise to any affected user.

btw.: the newer iGPUs and OpenCL 2.1 support provided by intels recent NEO libraries should be in fact sufficient for resolve from a technical point of view. perhaps it's not a optimal choice for efficient serious practical work, but it should be enough to run the application at least somehow. among others this would be very useful for automatic software tests resp. the reproduction of errors in CI pipelines, series of test runs which are usually executed in spartan containerized envrionments without additional acceleration support.

Tue Aug 13, 2019 11:24 am

i really don't see, why users have to guess and ask on mailing list, if a simple popping up dialog box could explain the actual error resp. unfulfilled hardware requirement much more precise to any affected user.

I totally agree! I practically lost all yesterday looking for some solution. Error reporting is inefficient for our own analysis. We practically have to "always" open a thread here in the forum to try to solve the problems.

Thanks for the answers Martin!!!

Tue Aug 13, 2019 5:38 pm

Just now I installed on the same computer with the same settings only on windows operating system and it worked properly.

What is the explanation?

Tue Aug 13, 2019 7:18 pm

eliaspereira wrote:Just now I installed on the same computer with the same settings only on windows operating system and it worked properly.

What is the explanation?

unfortunately it's a limitation of the linux version -- and from a technical point of view it isn't necessary, because the intel OpenCL libraries on the linux side are just as powerful as their windows counterparts.

Wed Aug 21, 2019 1:01 pm

Can anyone here export AAC with newer Resolve versions on Linux?
For me it's gone since 15.3

Wed Aug 21, 2019 4:33 pm

deezid wrote:Can anyone here export AAC with newer Resolve versions on Linux?
For me it's gone since 15.3

AFAIK AAC decode or encode hasn't been available on any Resolve build on Linux for years. See page 11 here: https://documents.blackmagicdesign.com/ ... c_List.pdf

Tue Aug 27, 2019 12:04 am

Hey Guys,

I've been trying to run Davinci 16 on SOLUS.

This is the output of the log files:

Code: Select all: [0x7f65c17474c0] | Main | INFO | 2019-08-26 18:21:36,290 | Running DaVinci Resolve Studio v16.0.0b.040 (Linux/Clang) [0x7f65c17474c0] | Main | INFO | 2019-08-26 18:21:36,290 | Updating display GPU information... OpenCL error -1001: 'Unspecified Error', GPUPropertiesUtilUnix.cpp:338. terminate called after throwing an instance of 'ReactorGPU::GPUException' ==========[CRASH DUMP]========== Please send this to support: #TIME Mon Aug 26 18:21:36 2019 - Uptime 00:00:00 (hh:mm:ss) #PROGRAM_NAME DaVinci Resolve Studio v16.0.0b.040 (Linux/Clang) /opt/resolve/bin/resolve() [0x50f30f9] /opt/resolve/bin/resolve() [0x50f28ea] /usr/lib/libpthread.so.0(+0x13a60) [0x7f65c4b51a60] /usr/lib/haswell/libc.so.6(gsignal+0xcf) [0x7f65c2a907cf] /usr/lib/haswell/libc.so.6(abort+0x121) [0x7f65c2a72535] /opt/resolve/bin/resolve(_ZN9__gnu_cxx27__verbose_terminate_handlerEv+0x15d) [0x71c175d] /opt/resolve/bin/../libs/libc++abi.so.1(+0x22036) [0x7f65f36db036] /opt/resolve/bin/../libs/libc++abi.so.1(+0x219d7) [0x7f65f36da9d7] /opt/resolve/bin/resolve() [0x1e06bdc] /opt/resolve/bin/resolve() [0x1e063a9] /opt/resolve/bin/resolve() [0x1e0004c] /opt/resolve/bin/resolve() [0x1dce61e] /opt/resolve/bin/resolve() [0x1dcb90e] /opt/resolve/bin/resolve() [0x1dca494] /opt/resolve/bin/resolve() [0x1dc9d48] /opt/resolve/bin/resolve() [0x1dde095] /opt/resolve/bin/resolve() [0x1dc5081] /usr/lib/haswell/libc.so.6(__libc_start_main+0xeb) [0x7f65c2a73c9b] /opt/resolve/bin/resolve() [0x1dc393d] Signal Number = 6 ================================ [0x7f65c17474c0] | Main | INFO | 2019-08-26 18:21:36,292 | Updating display GPU information... OpenCL error -1001: 'Unspecified Error', GPUPropertiesUtilUnix.cpp:338. terminate called recursively ==========[CRASH DUMP]========== Please send this to support: #TIME Mon Aug 26 18:21:36 2019 - Uptime 00:00:00 (hh:mm:ss) #PROGRAM_NAME DaVinci Resolve Studio v16.0.0b.040 (Linux/Clang) /opt/resolve/bin/resolve() [0x50f30f9] /opt/resolve/bin/resolve() [0x50f28ea] /usr/lib/libpthread.so.0(+0x13a60) [0x7f65c4b51a60] /usr/lib/haswell/libc.so.6(gsignal+0xcf) [0x7f65c2a907cf] /usr/lib/haswell/libc.so.6(abort+0x121) [0x7f65c2a72535] /opt/resolve/bin/resolve(_ZN9__gnu_cxx27__verbose_terminate_handlerEv+0xed) [0x71c16ed] /opt/resolve/bin/../libs/libc++abi.so.1(+0x22036) [0x7f65f36db036] /opt/resolve/bin/../libs/libc++abi.so.1(+0x223a1) [0x7f65f36db3a1] /opt/resolve/bin/../libs/libc++abi.so.1(+0x228f7) [0x7f65f36db8f7] /opt/resolve/bin/../libs/libc++abi.so.1(__gxx_personality_v0+0x6c) [0x7f65f36dbddc] /usr/lib/libgcc_s.so.1(_Unwind_RaiseException+0x176) [0x7f65c2c45236] /opt/resolve/bin/../libs/libc++abi.so.1(__cxa_throw+0x66) [0x7f65f36da9c6] /opt/resolve/bin/resolve() [0x1e06bdc] /opt/resolve/bin/resolve() [0x1e063a9] /opt/resolve/bin/resolve() [0x1e0004c] /opt/resolve/bin/resolve() [0x1dce61e] /opt/resolve/bin/resolve() [0x1dcb90e] /opt/resolve/bin/resolve() [0x1dca494] /opt/resolve/bin/resolve() [0x1dc9d48] /opt/resolve/bin/resolve() [0x1e017ee] /opt/resolve/bin/resolve() [0x50f2ca5] /usr/lib/libpthread.so.0(+0x13a60) [0x7f65c4b51a60] /usr/lib/haswell/libc.so.6(gsignal+0xcf) [0x7f65c2a907cf] /usr/lib/haswell/libc.so.6(abort+0x121) [0x7f65c2a72535] /opt/resolve/bin/resolve(_ZN9__gnu_cxx27__verbose_terminate_handlerEv+0x15d) [0x71c175d] /opt/resolve/bin/../libs/libc++abi.so.1(+0x22036) [0x7f65f36db036] /opt/resolve/bin/../libs/libc++abi.so.1(+0x219d7) [0x7f65f36da9d7] /opt/resolve/bin/resolve() [0x1e06bdc] /opt/resolve/bin/resolve() [0x1e063a9] /opt/resolve/bin/resolve() [0x1e0004c] /opt/resolve/bin/resolve() [0x1dce61e] /opt/resolve/bin/resolve() [0x1dcb90e] /opt/resolve/bin/resolve() [0x1dca494] /opt/resolve/bin/resolve() [0x1dc9d48] /opt/resolve/bin/resolve() [0x1dde095] /opt/resolve/bin/resolve() [0x1dc5081] /usr/lib/haswell/libc.so.6(__libc_start_main+0xeb) [0x7f65c2a73c9b] /opt/resolve/bin/resolve() [0x1dc393d] Signal Number = 6 ================================

These are the nvidia packages/drivers I have installed:

Code: Select all: nvidia-390-glx-driver-32bit | i| 390.129| 35| Solus|26 Aug 2019 18:39 nvidia-390-glx-driver-common | i| 390.129| 35| Solus|26 Aug 2019 18:38 nvidia-390-glx-driver-current | i| 390.129| 35| Solus|26 Aug 2019 18:40 nvidia-390-glx-driver-modaliases | i| 390.116| 26| Solus|26 Aug 2019 14:59

Any ideas???

Sun Sep 01, 2019 12:36 pm

Hello everyone!

I have been trying to install DaVinci Resolve for a few hours now and while I've had some succes it's just not quite there yet.

My system is a ThinkPad X1 6th gen, here is the hardware:

Code: Select all: > sudo lshw -short H/W path Device Class Description ================================================================== system 20KHCTO1WW (LENOVO_MT_20KH_BU_Think_FM_ThinkPad X1 Carbon 6th) /0 bus 20KHCTO1WW /0/3 memory 16GiB System Memory /0/3/0 memory 8GiB Row of chips LPDDR3 Synchronous Unbuffered (Unregistered) 2133 MHz (0,5 ns) /0/3/1 memory 8GiB Row of chips LPDDR3 Synchronous Unbuffered (Unregistered) 2133 MHz (0,5 ns) /0/7 memory 256KiB L1 cache /0/8 memory 1MiB L2 cache /0/9 memory 8MiB L3 cache /0/a processor Intel(R) Core(TM) i7-8550U CPU @ 1.80GHz /0/b memory 128KiB BIOS /0/100 bridge Xeon E3-1200 v6/7th Gen Core Processor Host Bridge/DRAM Registers /0/100/2 display UHD Graphics 620 /0/100/4 generic Xeon E3-1200 v5/E3-1500 v5/6th Gen Core Processor Thermal Subsystem /0/100/8 generic Xeon E3-1200 v5/v6 / E3-1500 v5 / 6th/7th Gen Core Processor Gaussian Mixture Model /0/100/14 bus Sunrise Point-LP USB 3.0 xHCI Controller /0/100/14/0 usb1 bus xHCI Host Controller /0/100/14/0/7 communication Bluetooth wireless interface /0/100/14/0/8 multimedia Integrated Camera /0/100/14/0/9 generic Generic USB device /0/100/14/1 usb2 bus xHCI Host Controller /0/100/14/1/3 scsi0 storage USB3.0-CRW /0/100/14/1/3/0.0.0 /dev/sda disk SD/MMC CRW /0/100/14/1/3/0.0.0/0 /dev/sda disk /0/100/14.2 generic Sunrise Point-LP Thermal subsystem /0/100/15 generic Sunrise Point-LP Serial IO I2C Controller #0 /0/100/16 communication Sunrise Point-LP CSME HECI #1 /0/100/1c bridge Sunrise Point-LP PCI Express Root Port #1 /0/100/1c/0 wlp2s0 network Wireless 8265 / 8275 /0/100/1c.4 bridge Sunrise Point-LP PCI Express Root Port #5 /0/100/1c.4/0 storage SSD Pro 7600p/760p/E 6100p Series /0/100/1d bridge Sunrise Point-LP PCI Express Root Port #9 /0/100/1f bridge Intel(R) 100 Series Chipset Family LPC Controller/eSPI Controller - 9D4E /0/100/1f.2 memory Memory controller /0/100/1f.3 multimedia Sunrise Point-LP HD Audio /0/100/1f.4 bus Sunrise Point-LP SMBus /0/100/1f.6 enp0s31f6 network Ethernet Connection (4) I219-V

Regarding the distribution it's a fully up-to-date KDE Neon (aka based on Ubuntu Bionic):

Code: Select all: > lsb_release -a No LSB modules are available. Distributor ID: neon Description: KDE neon User Edition 5.16 Release: 18.04 Codename: bionic

I installed DaVinci Resolve using the .deb converter.

A first attempt to start it failed because OpenCL was not working properly. Indeed, the NEO drivers were not installed. However, I have installed them and confirmed that they work properly using the LuxMark benchmark which completed successfully AND by the fact that the setup wizard deems my GPU worthy.

Now, instead of crashing right away, the software will display the loading screen and crash right after displaying "Looking for control surface" for a while.

Console output:

Code: Select all: ActCCMessage Already in Table: Code= c005, Mode= 13, Level= 1, CmdKey= -1, Option= 0 ActCCMessage Already in Table: Code= c006, Mode= 13, Level= 1, CmdKey= -1, Option= 0 ActCCMessage Already in Table: Code= c007, Mode= 13, Level= 1, CmdKey= -1, Option= 0 ActCCMessage Already in Table: Code= 2282, Mode= 0, Level= 0, CmdKey= 8, Option= 0 PnlMsgActionStringAdapter Already in Table: Code= 615e, Mode= 0, Level= 0, CmdKey= -1, Option= 0 16.0 (#060) Linux/Clang Main thread starts: 22A12B00 [0x7fbf22a12b00] | Undefined | INFO | 2019-09-01 14:29:48,767 | -------------------------------------------------------------------------------- [0x7fbf22a12b00] | Undefined | INFO | 2019-09-01 14:29:48,767 | Loaded log config from /home/remy/.local/share/DaVinciResolve/configs/log-conf.xml [0x7fbf22a12b00] | Undefined | INFO | 2019-09-01 14:29:48,767 | -------------------------------------------------------------------------------- Playback/recording through the PulseAudio sound server Discard all samples (playback) or generate zero samples (capture) PulseAudio Sound Server HDA Intel PCH, ALC285 AnalogDefault Audio Device HDA Intel PCH, ALC285 AnalogFront speakers HDA Intel PCH, ALC285 Analog2.1 Surround output to Front and Subwoofer speakers HDA Intel PCH, ALC285 Analog4.0 Surround output to Front and Rear speakers HDA Intel PCH, ALC285 Analog4.1 Surround output to Front, Rear and Subwoofer speakers HDA Intel PCH, ALC285 Analog5.0 Surround output to Front, Center and Rear speakers HDA Intel PCH, ALC285 Analog5.1 Surround output to Front, Center, Rear and Subwoofer speakers HDA Intel PCH, ALC285 Analog7.1 Surround output to Front, Center, Side, Rear and Woofer speakers HDA Intel PCH, HDMI 0HDMI Audio Output HDA Intel PCH, HDMI 1HDMI Audio Output HDA Intel PCH, HDMI 2HDMI Audio Output HDA Intel PCH, HDMI 3HDMI Audio Output HDA Intel PCH, HDMI 4HDMI Audio Output HDA Intel PCH, ALC285 AnalogDirect sample mixing device HDA Intel PCH, HDMI 0Direct sample mixing device HDA Intel PCH, HDMI 1Direct sample mixing device HDA Intel PCH, HDMI 2Direct sample mixing device HDA Intel PCH, HDMI 3Direct sample mixing device HDA Intel PCH, HDMI 4Direct sample mixing device HDA Intel PCH, ALC285 AnalogDirect sample snooping device HDA Intel PCH, HDMI 0Direct sample snooping device HDA Intel PCH, HDMI 1Direct sample snooping device HDA Intel PCH, HDMI 2Direct sample snooping device HDA Intel PCH, HDMI 3Direct sample snooping device HDA Intel PCH, HDMI 4Direct sample snooping device HDA Intel PCH, ALC285 AnalogDirect hardware device without any conversions HDA Intel PCH, HDMI 0Direct hardware device without any conversions HDA Intel PCH, HDMI 1Direct hardware device without any conversions HDA Intel PCH, HDMI 2Direct hardware device without any conversions HDA Intel PCH, HDMI 3Direct hardware device without any conversions HDA Intel PCH, HDMI 4Direct hardware device without any conversions HDA Intel PCH, ALC285 AnalogHardware device with all software conversions HDA Intel PCH, HDMI 0Hardware device with all software conversions HDA Intel PCH, HDMI 1Hardware device with all software conversions HDA Intel PCH, HDMI 2Hardware device with all software conversions HDA Intel PCH, HDMI 3Hardware device with all software conversions HDA Intel PCH, HDMI 4Hardware device with all software conversions Playback/recording through the PulseAudio sound server Discard all samples (playback) or generate zero samples (capture) PulseAudio Sound Server HDA Intel PCH, ALC285 AnalogDefault Audio Device HDA Intel PCH, ALC285 AnalogFront speakers HDA Intel PCH, ALC285 Analog2.1 Surround output to Front and Subwoofer speakers HDA Intel PCH, ALC285 Analog4.0 Surround output to Front and Rear speakers HDA Intel PCH, ALC285 Analog4.1 Surround output to Front, Rear and Subwoofer speakers HDA Intel PCH, ALC285 Analog5.0 Surround output to Front, Center and Rear speakers HDA Intel PCH, ALC285 Analog5.1 Surround output to Front, Center, Rear and Subwoofer speakers HDA Intel PCH, ALC285 Analog7.1 Surround output to Front, Center, Side, Rear and Woofer speakers HDA Intel PCH, HDMI 0HDMI Audio Output HDA Intel PCH, HDMI 1HDMI Audio Output HDA Intel PCH, HDMI 2HDMI Audio Output HDA Intel PCH, HDMI 3HDMI Audio Output HDA Intel PCH, HDMI 4HDMI Audio Output HDA Intel PCH, ALC285 AnalogDirect sample mixing device HDA Intel PCH, HDMI 0Direct sample mixing device HDA Intel PCH, HDMI 1Direct sample mixing device HDA Intel PCH, HDMI 2Direct sample mixing device HDA Intel PCH, HDMI 3Direct sample mixing device HDA Intel PCH, HDMI 4Direct sample mixing device HDA Intel PCH, ALC285 AnalogDirect sample snooping device HDA Intel PCH, HDMI 0Direct sample snooping device HDA Intel PCH, HDMI 1Direct sample snooping device HDA Intel PCH, HDMI 2Direct sample snooping device HDA Intel PCH, HDMI 3Direct sample snooping device HDA Intel PCH, HDMI 4Direct sample snooping device HDA Intel PCH, ALC285 AnalogDirect hardware device without any conversions HDA Intel PCH, HDMI 0Direct hardware device without any conversions HDA Intel PCH, HDMI 1Direct hardware device without any conversions HDA Intel PCH, HDMI 2Direct hardware device without any conversions HDA Intel PCH, HDMI 3Direct hardware device without any conversions HDA Intel PCH, HDMI 4Direct hardware device without any conversions HDA Intel PCH, ALC285 AnalogHardware device with all software conversions HDA Intel PCH, HDMI 0Hardware device with all software conversions HDA Intel PCH, HDMI 1Hardware device with all software conversions HDA Intel PCH, HDMI 2Hardware device with all software conversions HDA Intel PCH, HDMI 3Hardware device with all software conversions HDA Intel PCH, HDMI 4Hardware device with all software conversions Playback/recording through the PulseAudio sound server Discard all samples (playback) or generate zero samples (capture) PulseAudio Sound Server HDA Intel PCH, ALC285 AnalogDefault Audio Device HDA Intel PCH, ALC285 AnalogFront speakers HDA Intel PCH, ALC285 Analog2.1 Surround output to Front and Subwoofer speakers HDA Intel PCH, ALC285 Analog4.0 Surround output to Front and Rear speakers HDA Intel PCH, ALC285 Analog4.1 Surround output to Front, Rear and Subwoofer speakers HDA Intel PCH, ALC285 Analog5.0 Surround output to Front, Center and Rear speakers HDA Intel PCH, ALC285 Analog5.1 Surround output to Front, Center, Rear and Subwoofer speakers HDA Intel PCH, ALC285 Analog7.1 Surround output to Front, Center, Side, Rear and Woofer speakers HDA Intel PCH, HDMI 0HDMI Audio Output HDA Intel PCH, HDMI 1HDMI Audio Output HDA Intel PCH, HDMI 2HDMI Audio Output HDA Intel PCH, HDMI 3HDMI Audio Output HDA Intel PCH, HDMI 4HDMI Audio Output HDA Intel PCH, ALC285 AnalogDirect sample mixing device HDA Intel PCH, HDMI 0Direct sample mixing device HDA Intel PCH, HDMI 1Direct sample mixing device HDA Intel PCH, HDMI 2Direct sample mixing device HDA Intel PCH, HDMI 3Direct sample mixing device HDA Intel PCH, HDMI 4Direct sample mixing device HDA Intel PCH, ALC285 AnalogDirect sample snooping device HDA Intel PCH, HDMI 0Direct sample snooping device HDA Intel PCH, HDMI 1Direct sample snooping device HDA Intel PCH, HDMI 2Direct sample snooping device HDA Intel PCH, HDMI 3Direct sample snooping device HDA Intel PCH, HDMI 4Direct sample snooping device HDA Intel PCH, ALC285 AnalogDirect hardware device without any conversions HDA Intel PCH, HDMI 0Direct hardware device without any conversions HDA Intel PCH, HDMI 1Direct hardware device without any conversions HDA Intel PCH, HDMI 2Direct hardware device without any conversions HDA Intel PCH, HDMI 3Direct hardware device without any conversions HDA Intel PCH, HDMI 4Direct hardware device without any conversions HDA Intel PCH, ALC285 AnalogHardware device with all software conversions HDA Intel PCH, HDMI 0Hardware device with all software conversions HDA Intel PCH, HDMI 1Hardware device with all software conversions HDA Intel PCH, HDMI 2Hardware device with all software conversions HDA Intel PCH, HDMI 3Hardware device with all software conversions HDA Intel PCH, HDMI 4Hardware device with all software conversions

ResolveDebug.log:

Code: Select all: [0x7fbf22a12b00] | Main | INFO | 2019-09-01 14:29:48,768 | Running DaVinci Resolve v16.0.0.060 (Linux/Clang) [0x7fbf22a12b00] | Main | INFO | 2019-09-01 14:29:48,768 | Updating display GPU information... [0x7fbf22a12b00] | Main | INFO | 2019-09-01 14:29:48,869 | Detecting Main Display properties [0x7fbf22a12b00] | Main | INFO | 2019-09-01 14:29:48,876 | Process to detect main display has finished [0x7fbf22a12b00] | Main | INFO | 2019-09-01 14:29:48,883 | Fallback process to detect main display has finished [0x7fbf22a12b00] | Main | INFO | 2019-09-01 14:29:48,893 | 0 GPUs (excluding display GPU) found. Using OpenCL for processing. [0x7fbf22a12b00] | Main | INFO | 2019-09-01 14:29:48,893 | Not GLmap capable. GPUs: 0 discrete, 0 integrated, 0 external. Auto mapping, OpenCL processing, main display not on external GPU. [0x7fbf22a12b00] | Main | INFO | 2019-09-01 14:29:48,893 | Setting LsManager.3.NumGPUs = 1 [0x7fbf22a12b00] | IO | INFO | 2019-09-01 14:29:48,893 | RED InitializeSdk with library path at /opt/resolve/libs [0x7fbf22a12b00] | IO | INFO | 2019-09-01 14:29:48,948 | R3DAPI 7.1.0-3YM06 (20180720 L64S) R3DSDK 7.1.0-3YM06 (20180720 L64D) RED CUDA 7.1.0-45494 (20180721) RED OPENCL 7.1.0-45494 (20180721) [/opt/resolve/libs/] init is successful [0x7fbf22a12b00] | Main | INFO | 2019-09-01 14:29:48,948 | 0 RED rocket cards available There are 1 GPUs in the system. libDeckLinkAPI.so: cannot open shared object file: No such file or directory [0x7fbf22a12b00] | Main | INFO | 2019-09-01 14:29:48,948 | Decklink model name: '', version: '' [0x7fbf22a12b00] | DVIP | INFO | 2019-09-01 14:29:48,948 | DVIP Version : 16.0.0, Revision = 88204 (Release) [0x7fbf22a12b00] | Main | INFO | 2019-09-01 14:29:49,267 | Installed custom font: Open Sans [0x7fbf22a12b00] | Main | INFO | 2019-09-01 14:29:49,269 | Installed custom font: Open Sans [0x7fbf22a12b00] | Main | INFO | 2019-09-01 14:29:49,270 | Installed custom font: Open Sans [0x7fbf22a12b00] | Main | INFO | 2019-09-01 14:29:49,297 | Finished loading Application style sheet Local.Speed.Debug switched OFF - '' [0x7fbf045e1700] | LeManager | INFO | 2019-09-01 14:29:49,394 | 521, 38 [0x7fbf22a12b00] | BtCommon | INFO | 2019-09-01 14:29:50,104 | Memory config: reserved=6000M pinned=4000M log=0 [0x7fbf22a12b00] | BtCommon | INFO | 2019-09-01 14:29:50,104 | Using default pooled memory manager [0x7fbf03de0700] | BtCommon | INFO | 2019-09-01 14:29:50,104 | BtResourceManager Process Thread Started [0x7fbf22a12b00] | BtCommon | INFO | 2019-09-01 14:29:50,104 | Daemon DPDecoder is started 15517 [0x7fbf22a12b00] | BtCommon | INFO | 2019-09-01 14:29:50,105 | Daemon DPDecoder is started 15518 [0x7fbf22a12b00] | BtCommon | INFO | 2019-09-01 14:29:50,105 | Daemon DPDecoder is started 15519 [0x7fbf22a12b00] | BtCommon | INFO | 2019-09-01 14:29:50,105 | Daemon DPDecoder is started 15520 [0x7fbf22a12b00] | BtCommon | INFO | 2019-09-01 14:29:50,105 | Daemon DPDecoder is started 15521 [0x7fbf22a12b00] | BtCommon | INFO | 2019-09-01 14:29:50,105 | Daemon DPDecoder is started 15522 [0x7fbf22a12b00] | BtCommon | INFO | 2019-09-01 14:29:50,106 | Daemon DPDecoder is started 15523 [0x7fbf22a12b00] | BtCommon | INFO | 2019-09-01 14:29:50,107 | Daemon DPDecoder is started 15524 [0x7fbf22a12b00] | SyManager | INFO | 2019-09-01 14:29:50,113 | Total: 20, NumDtThreads: 8, NumComms: 0, NumSites: 1 [0x7fbf22a12b00] | SyManager | INFO | 2019-09-01 14:29:50,113 | Lookaheads -> playback = 20, record = 20, stop = 2 Sy High Command Handler Thread ----- (140458346792704) SY high priority cmd handler thread starts: 01DDC700 Sy Data Handler Thread ----- (140458330007296) SY data handler thread starts: 00DDA700 Sy Low Command Handler Thread ----- (140458338400000) SY low priority cmd handler thread starts: 015DB700 Gs High Command Handler Thread ----- (140458304829184) GS high priority cmd handler thread starts: FF5D7700 Gs Low Command Handler Thread ----- (140458296436480) GS low priority cmd handler thread starts: FEDD6700 [0x7fbefe5d5700] | GsManager | INFO | 2019-09-01 14:29:50,113 | Gs Processor Thread ----- (140458288043776) Dp High Command Handler Thread ----- (140458279651072) DP high priority cmd handler thread starts: FDDD4700 GS processor thread starts: FE5D5700 Local.Speed.Verbose switched OFF - '' Dp Low Command Handler Thread ----- (140458271258368) DP low priority cmd handler thread starts: FD5D3700 Dt High Command Handler Thread ----- (140458262865664) DT high priority cmd handler thhread starts: FCDD2700 Dt Low Command Handler Thread ----- (140458254472960) DT low priority cmd handler thread starts: FC5D1700 [0x7fbf22a12b00] | DtManager | INFO | 2019-09-01 14:29:50,113 | Using 8 generic IO threads [0x7fbeffdd8700] | SyManager | ERROR | 2019-09-01 14:29:50,113 | Failed to connect to panel socket [0x7fbefbdd0700] | DtManager | INFO | 2019-09-01 14:29:50,113 | Dt Data Handler Thread Started DT data handler thread starts: FBDD0700 [0x7fbf22a12b00] | DtManager | INFO | 2019-09-01 14:29:50,113 | Total of 16 IO threads (including 8 generic and 8 Red decode threads) [0x7fbeffdd8700] | SyManager | ERROR | 2019-09-01 14:29:50,114 | DRIVER: open /var/tmp/davinci_socket failed [0x7fbefadce700] | DtManager | INFO | 2019-09-01 14:29:50,114 | Dt Worker Thread Started [0x7fbef9dcc700] | DtManager | INFO | 2019-09-01 14:29:50,114 | Dt Worker Thread Started [0x7fbefb5cf700] | DtManager | INFO | 2019-09-01 14:29:50,114 | Dt Worker Thread Started [0x7fbef95cb700] | DtManager | INFO | 2019-09-01 14:29:50,114 | Dt Worker Thread Started [0x7fbefa5cd700] | DtManager | INFO | 2019-09-01 14:29:50,114 | Dt Worker Thread Started [0x7fbef75c7700] | DtManager | INFO | 2019-09-01 14:29:50,114 | Dt Worker Thread Started [0x7fbef45c1700] | DtManager | INFO | 2019-09-01 14:29:50,114 | Dt Worker Thread Started [0x7fbef7dc8700] | DtManager | INFO | 2019-09-01 14:29:50,114 | Dt Worker Thread Started Ls High Command Handler Thread ----- (140458095011584) Ls Low Command Handler Thread ----- (140458086618880) LS low priority cmd handler thread starts: F25BD700 [0x7fbef8dca700] | DtManager | INFO | 2019-09-01 14:29:50,114 | Dt Worker Thread Started Ls Data Handler Thread ----- (140458078226176) Ls High Command Handler Thread ----- (140458069833472) [0x7fbef65c5700] | DtManager | INFO | 2019-09-01 14:29:50,114 | Dt Worker Thread Started Ls Low Command Handler Thread ----- (140458061440768) LS low priority cmd handler thread starts: F0DBA700 LS data handler thread starts: F1DBC700 Ls Data Handler Thread ----- (140458053048064) [0x7fbef85c9700] | DtManager | INFO | 2019-09-01 14:29:50,114 | Dt Worker Thread Started Ls High Command Handler Thread ----- (140458044655360) LS data handler thread starts: F05B9700 [0x7fbef4dc2700] | DtManager | INFO | 2019-09-01 14:29:50,114 | Dt Worker Thread Started Ls Low Command Handler Thread ----- (140458036262656) LS low priority cmd handler thread starts: EF5B7700 Ls Data Handler Thread ----- (140458027869952) [0x7fbef3dc0700] | DtManager | INFO | 2019-09-01 14:29:50,114 | Dt Worker Thread Started [0x7fbef6dc6700] | DtManager | INFO | 2019-09-01 14:29:50,114 | Dt Worker Thread Started [0x7fbf22a12b00] | DbCommon2 | INFO | 2019-09-01 14:29:50,114 | Loading dblist file: /home/remy/.local/share/DaVinciResolve/configs/.dblist Mem Data Transmitter Thread ----- (140458019477248) [0x7fbef5dc4700] | DtManager | INFO | 2019-09-01 14:29:50,114 | Dt Worker Thread Started Mem data transmitter thread starts: EE5B5700 [0x7fbef35bf700] | DtManager | INFO | 2019-09-01 14:29:50,114 | Dt Worker Thread Started [0x7fbef55c3700] | DtManager | INFO | 2019-09-01 14:29:50,114 | Dt Worker Thread Started [0x7fbeeedb6700] | GPUManager | INFO | 2019-09-01 14:29:50,114 | Let There Be OpenCL Light! [0x7fbeeedb6700] | GPUManager | INFO | 2019-09-01 14:29:50,119 | Start detecting OpenCL boards [0x7fbeeedb6700] | GPUManager | INFO | 2019-09-01 14:29:50,119 | Skipping unqualified OpenCL platform: Intel(R) OpenCL HD Graphics [0x7fbeeedb6700] | GPUManager | INFO | 2019-09-01 14:29:50,119 | 0 OpenCL boards detected Urgent message: CRITICAL_PREF: DaVinci Resolve could not find any OpenCL capable GPUs. Would you like to review and update your DaVinci Resolve Hardware Configuration? ||Please ensure that appropriate GPU drivers are installed and your DaVinci Resolve hardware is configured appropriately. [0x7fbeeedb6700] | GPUManager | ERROR | 2019-09-01 14:29:50,119 | CRITICAL_PREF: DaVinci Resolve could not find any OpenCL capable GPUs. Would you like to review and update your DaVinci Resolve Hardware Configuration? ||Please ensure that appropriate GPU drivers are installed and your DaVinci Resolve hardware is configured appropriately. [0x7fbeeedb6700] | IP | ERROR | 2019-09-01 14:29:50,119 | Failed to initialize OpenCL boards LS data handler thread starts: EEDB6700 [0x7fbf22a12b00] | IO | INFO | 2019-09-01 14:29:50,122 | Using DNxHR library v2.4.0.57r MidiInDummy: This class provides no functionality. MidiOutDummy: This class provides no functionality. [0x7fbf22a12b00] | Fairlight | INFO | 2019-09-01 14:29:51,239 | 00.00.00.892(000): Running Fairlight (r011941-a2024b7) [0x7fbf22a12b00] | UI.GLContext | INFO | 2019-09-01 14:29:51,253 | Creating shared OpenGL context for this thread (2 total). [0x7fbf22a12b00] | UI.GLContext | INFO | 2019-09-01 14:29:51,258 | Initialized OpenGL 3.0 (requested 2.0) on device 'Intel Open Source Technology Center Mesa DRI Intel(R) UHD Graphics 620 (Kabylake GT2) ' [0x7fbe8c468700] | UI.GLContext | INFO | 2019-09-01 14:29:51,258 | Creating shared OpenGL context for this thread (3 total). ==========[CRASH DUMP]========== Please send this to support: #TIME Sun Sep 1 14:29:51 2019 - Uptime 00:00:01 (hh:mm:ss) #PROGRAM_NAME DaVinci Resolve v16.0.0.060 (Linux/Clang) ./resolve() [0x509f8b9] ./resolve() [0x509f0aa] /lib/x86_64-linux-gnu/libpthread.so.0(+0x12890) [0x7fbf2c8df890] Signal Number = 11 ================================ [0x7fbe8c468700] | CrashReport | ERROR | 2019-09-01 14:29:51,999 | Compress() : Failed to add file to archive

Now I'm not blind and I plainly see the "Skipping unqualified OpenCL platform: Intel(R) OpenCL HD Graphics". I guess it's the reason why it crashes. And it would be consistent with what other people say above.

But I still have some hope that I can run it on my computer, so if anybody can confirm the cause of failure it would be awesome. Thanks

Mon Sep 02, 2019 2:34 am

Daniel Tufvesson wrote:... MakeResolveDeb ... is released ...

Hi Daniel,

Success with MakeResolveDeb on Ubuntu Desktop 18.04.3 LTS. Thank you!

I am a licensed DR Studio user but this Ubuntu test was performed w/the free DR download as an experiment... seems to be functioning well so may try my licensed version w/Fusion over on Ubuntu to see how it goes.

Anyway, of course your script was very helpful...

Thanks again,
Ashley

Wed Sep 04, 2019 6:02 am

I am having the following issue while starting the davinci resolve.
Using ubuntu 18.04.

Code: Select all: [0x7fa1588e1700] | SyManager | ERROR | 2019-09-04 11:16:49,246 | Failed to connect to panel socket [0x7fa1588e1700] | SyManager | ERROR | 2019-09-04 11:16:49,247 | DRIVER: open /var/tmp/davinci_socket failed [0x7fe24ebea700] | CrashReport | ERROR | 2019-09-04 11:16:17,644 | Compress() : Failed to add file to archive.

Can anyone please help me, I am sitting with this installation for 2 days and still counting. Previously i used it on mac and worked perfectly without any issues.
Really appreciate the help. Thanks.

Wed Sep 04, 2019 9:14 am

I just installed on

Code: Select all: sxpert@kitten:~$ cat /etc/lsb-release DISTRIB_ID=Ubuntu DISTRIB_RELEASE=19.04 DISTRIB_CODENAME=disco DISTRIB_DESCRIPTION="Ubuntu 19.04"

all I get is a crash on startup

Code: Select all: sxpert@kitten:~$ /opt/resolve/bin/resolve ActCCMessage Already in Table: Code= c005, Mode= 13, Level= 1, CmdKey= -1, Option= 0 ActCCMessage Already in Table: Code= c006, Mode= 13, Level= 1, CmdKey= -1, Option= 0 ActCCMessage Already in Table: Code= c007, Mode= 13, Level= 1, CmdKey= -1, Option= 0 ActCCMessage Already in Table: Code= 2282, Mode= 0, Level= 0, CmdKey= 8, Option= 0 PnlMsgActionStringAdapter Already in Table: Code= 615e, Mode= 0, Level= 0, CmdKey= -1, Option= 0 QSocketNotifier: Can only be used with threads started with QThread New connection received. Connection is closed. log4cxx: No appender could be found for logger (UI). log4cxx: Please initialize the log4cxx system properly. 16.0 (#060) Linux/Clang Main thread starts: B5C55240 [0x7fe5b5c55240] | Undefined | INFO | 2019-09-04 11:07:25,044 | -------------------------------------------------------------------------------- [0x7fe5b5c55240] | Undefined | INFO | 2019-09-04 11:07:25,045 | Loaded log config from /home/sxpert/.local/share/DaVinciResolve/configs/log-conf.xml [0x7fe5b5c55240] | Undefined | INFO | 2019-09-04 11:07:25,045 | -------------------------------------------------------------------------------- Aborted (core dumped)

Wed Sep 04, 2019 11:27 am

azeez148 wrote:I am having the following issue while starting the davinci resolve.
Using ubuntu 18.04.
Code: Select all
[0x7fa1588e1700] | SyManager | ERROR | 2019-09-04 11:16:49,246 | Failed to connect to panel socket [0x7fa1588e1700] | SyManager | ERROR | 2019-09-04 11:16:49,247 | DRIVER: open /var/tmp/davinci_socket failed [0x7fe24ebea700] | CrashReport | ERROR | 2019-09-04 11:16:17,644 | Compress() : Failed to add file to archive.

Can anyone please help me, I am sitting with this installation for 2 days and still counting. Previously i used it on mac and worked perfectly without any issues.
Really appreciate the help. Thanks.

Any help on this is highly appreciated.

Wed Sep 04, 2019 12:21 pm

Hi,
I'd suggest to post your hardware configuration

Wed Sep 04, 2019 4:59 pm

kobayashi wrote:Hi,
I'd suggest to post your hardware configuration

Linux version: Ubuntu 18.04.3 LTS
Memory: 15.5GiB
Processor: Intel® Core™ i7-8565U CPU @ 1.80GHz × 8
Graphics: GeForce MX130/PCIe/SSE2
OS Type: 64-bit

Do you need anymore information, please let me know. Thanks

Wed Sep 04, 2019 5:14 pm

Did you install OpenCL properly? Not sure how you should do that with nvidia grpahics but I'd start there. To begin with, try "clinfo" in the terminal [and install it if missing] and see if it finds a device.

Wed Sep 04, 2019 6:24 pm

With Nvidia I'd stick with CUDA for compute tasks

Check your Nvidia driver installation, to be on the latest proprietary release and if you can get CUDA compute to work properly
Maybe you can test with Blender

Wed Sep 04, 2019 8:48 pm

Oh I'm not saying to use OpenCL but I've figured on my machine that it just won't start if OpenCL doesn't find anything.

Thu Sep 05, 2019 5:01 pm

Hi
I tried several Ubuntu version earlier, both before knowing about Resolve to activate brand new hw, and later to install Resolve on Ubuntu (not supported

I have worked with Redhat/Centos for many years, prefer to use Ubuntu!

Decided on Ubuntu Studio with it's low latency kernel which should be an advantage with sound/video work Your machine 'only' runs one front applikation (Resolve) so it gets priority attention (less latency)

Look at this link:
https:// forum.blackmagicdesign.com/viewforum.php?f=21&start=125
Not quite sure how links on the forum works, so take away space after second / in the link

Read it and ask if something is unclear!
This setup is really fast and seems very stable for me
I don't mean you have to use Ubuntu Studio, but to me it works!
---
When you have messed up a OS install with failed installs etc it's safest to do a clean install (also a good confirmation after a successful install to run all your notes again as a clean install, maybe your notes are so and so...

It's been reported several times on the forum that installs on 'unsupported linux dists' fail at start due to missing lib libopencl, been very repeatable for me on several Ubuntu versions

Lot more 'issues' on earlier attempts

- Look at 'dmesg | less' and search for 'gpu' to see what boot thinks about you hw/gpu,
this helped me see missing things
- Try to start your installed resolve at command line with '/opt/resolve/bin/resolve', this will report among others if libopencl is the problem

If so install the missing component, lots of info on the forum how
Björn

Thu Sep 05, 2019 6:14 pm

Hi everyone
sorry my not perfect english
I downloaded Davinci Resolve 16 for Windows and Linux
I use an intel machine with integrated video gpu and it really amazed me a lot.

The program on Windows works, while on linux it crashes at startup because the video card has problems.
The integrated video card supports graphic libraries well both on windows and on Debian linux but for some strange reason on Linux the program does not work. I know that if I used an AMD or NVIDIA video card I would not have these problems, but I hope someone finds a solution to use the intel integrated video card for this program. I am sure that it is not a hardware or software problem libraries, but how the progrmma uses them. Has anyone managed to get Davinci Resolve to work with an integrated Intel video card? Thank you

Thu Sep 05, 2019 7:42 pm

Hi,
I think that OpenCl on Intel integrated on Linux is unsupported by Resolve

At least until we see a discrete Intel GPU in the future

Thu Sep 05, 2019 8:19 pm

kobayashi wrote:Hi,
I think that OpenCl on Intel integrated on Linux is unsupported by Resolve.

yes -- that's what we have to assume, because nobody has a reported a success story, but from a technical point of view i don't see any reason, why it doesn't work better. in the meanwhile the intel OpenCL support on linux shouldn't be worse than on windows.

Thu Sep 05, 2019 10:51 pm

I agree Martin, technically it should be fine, since Intel iGPU drivers are mature AFAIK

What I see is probably a decision to not support it.
I stand corrected but Resolve per se isn't really optimized to run on weak hardware, and the Linux version "historically" is more targeted toward high end workstations.

Hopefully this is subject to change in the future, with Linux being more and more a desktop friendly OS.
But I digress, sorry

Thu Sep 05, 2019 11:14 pm

I'm wondering however if there is a secret "shut the **** up and start anyways" switch

Fri Sep 06, 2019 7:23 pm

kobayashi wrote:What I see is probably a decision to not support it.

Have a cigar.

kobayashi wrote:I stand corrected but Resolve per se isn't really optimized to run on weak hardware, and the Linux version "historically" is more targeted toward high end workstations.

Yes, RHEL turnkey systems, which had "features" like Decklink as the sole audio output. Call it legacy or leftover, BMD bought the assets and ported the software to Mac and Win.

That's where the disparity between versions started - the Linux version is not really optimized for desktops. The Intel iGPU is something you'd hardly use with the big panel, so the lack of support wouldn't really be a problem... until BMD would release the Linux version as is.

kobayashi wrote:Hopefully this is subject to change in the future, with Linux being more and more a desktop friendly OS.

It would be nice, but I wouldn't expect much. v14 on Linux had grave issues, which were fixed in 15b1. With Resolve now settling into a yearly release cycle, launching at NAB, available time to tinker with the Linux version decreases.

17b1 may bring new things, who knows.

Xoooowap wrote:I'm wondering however if there is a secret "shut the **** up and start anyways" switch

That's probably headless, -rr.

Sat Sep 07, 2019 3:11 am

Sulo Kokki wrote:That's probably headless, -rr.

Interestingly enough, it crashes the same way

Sun Sep 08, 2019 3:50 am

Hi! I had Resolve working just fine on Fedora 29, till I had to reinstall system.

I've installed F30, Resolve 16/16.1 was not starting at all. But with gcc discrepency which was not supported by NVIDIA itself I thought that there is something wrong about that F30 so I've reinstalled yet again to F29
Unfortunately Resolve is still not starting ! there is nothing helpful within logs besides one error:

Code: Select all: [0x7f22292cbc40] | IO | ERROR | NVENC m_EncodeAPI.nvEncInitializeEncoder(m_pEncodeSession, &initParams) return: 8 [0x7f22292cbc40] | IO | ERROR | Nvidia codec cannot be initialized with property successfully

Nvidia drivers are working fine, CUDA is working great. But Resolve is not starting at all

strace is not very helpfull either:

Code: Select all: 20:55:39.061394 write(2, "[0x7fc794aabc40] | UI.GLContext "..., 176) = 176 20:55:39.061548 write(4, "[0x7fc794aabc40] | UI.GLContext "..., 176) = 176 20:55:39.061673 mmap(NULL, 8392704, PROT_NONE, MAP_PRIVATE|MAP_ANONYMOUS|MAP_STACK, -1, 0) = 0x7fc6c68ca000 20:55:39.061740 mprotect(0x7fc6c68cb000, 8388608, PROT_READ|PROT_WRITE|PROT_EXEC) = 0 20:55:39.061823 clone(child_stack=0x7fc6c70c9ab0, flags=CLONE_VM|CLONE_FS|CLONE_FILES|CLONE_SIGHAND|CLONE_THREAD|CLONE_SYSVSEM|CLONE_SETTLS|CLONE_PARENT_SETTID|CLONE_CHILD_CLEARTID, parent_tid=[6311], tls=0x7fc6c70ca700, child_tidptr=0x7fc6c70ca9d0) = 6311 20:55:39.061947 futex(0x1894f150, FUTEX_WAIT_BITSET_PRIVATE|FUTEX_CLOCK_REALTIME, 0, {tv_sec=1567914944, tv_nsec=61923042}, FUTEX_BITSET_MATCH_ANY) = -1 ETIMEDOUT (Connection timed out) 20:55:44.062256 futex(0x1894f14c, FUTEX_WAKE_PRIVATE, 2147483647) = 1 20:55:44.062393 futex(0x7fc6cdcf2a98, FUTEX_WAKE_PRIVATE, 1) = 0 20:55:44.062487 futex(0x1894f030, FUTEX_WAIT_PRIVATE, 2, NULL) = ? 20:55:44.878132 +++ exited with 0 +++

I've installed Resolve 15 - and it works great! So it's something with v16

Mon Sep 16, 2019 7:12 am

azeez148 wrote:
kobayashi wrote:Hi,
I'd suggest to post your hardware configuration

Linux version: Ubuntu 18.04.3 LTS
Memory: 15.5GiB
Processor: Intel® Core™ i7-8565U CPU @ 1.80GHz × 8
Graphics: GeForce MX130/PCIe/SSE2
OS Type: 64-bit

Do you need anymore information, please let me know. Thanks

Finally, At-last the long lasting wait is over..... Davinvci is running now . I have installed the version 15.2.1. Thanks.

Mon Sep 16, 2019 7:24 am

azeez148 wrote:
azeez148 wrote:
kobayashi wrote:Hi,
I'd suggest to post your hardware configuration

Linux version: Ubuntu 18.04.3 LTS
Memory: 15.5GiB
Processor: Intel® Core™ i7-8565U CPU @ 1.80GHz × 8
Graphics: GeForce MX130/PCIe/SSE2
OS Type: 64-bit

Do you need anymore information, please let me know. Thanks

Finally, At-last the long lasting wait is over..... Davinvci is running now . I have installed the version 15.2.1. Thanks.

Hi. Where you get Davinci Resolve version 15.2.1? Official website propose only 16 and 16.1...

Mon Sep 16, 2019 10:36 pm

Hello all,

I've just purchased a DaVinci Dongle for Linux to export in ProRes. So rare to find! $1650 on eBay...

I'm bored with Hackintosh issues so I'll probably buy the new ThreadRipper generation with 64 cores. I already know a little bit Ubuntu (but not CentOS at all). Can you please confirm DaVinci Studio 15 or 16 works perfectly with Ubuntu? I'll use it with a Decklink 4K Extreme 12G.

Are the DNx export still an issue with AMD/Linux?

Thank you.

Who is online