- Posts: 215
- Joined: Mon Aug 12, 2013 5:13 pm
Hi Frank,
I've had that same crackling noises (really loud) problem last night when filming with my BMCC. I kept on twisting the inputs to the camera until it went away. Will have to test before the next shoot to narrow down what the problem is.
As far as low levels are concerned, if you are not using an external pre-amp and connecting the mic directly or via a passive adaptor then firmware 1.2.1 is the best to use. I keep the BMCC channel inputs at 50% and have good levels. With later firmware, at least with my camera, the levels are way too low, noisy and not usable at all.
Jules