DAVINCI 16 | Big feature request list.

Get answers to your questions about color grading, editing and finishing with DaVinci Resolve.
  • Author
  • Message
Offline

John Paines

  • Posts: 1391
  • Joined: Tue Jul 28, 2015 4:04 pm

Re: DAVINCI 16 | Big feature request list.

PostFri May 04, 2018 12:46 am

Tristan Pemberton wrote:How? For the life of me I can't find information on trimming multiple clips together.


Go into Trim mode ("t") select all or draw a box around the clips you want to trim. Use "u" to toggle the edit point. Then trim using any of the methods available for single clips.

Tristan Pemberton wrote:I can use the timecode adjust now - just type it in. Be good if there was some sort of feedback for that process as it's not intuitive to just type in timecode. But happy it works.


The feedback is in the right timecode field of the source or record monitor, depending on where you're entering the TC values.
Offline

Rohit Gupta

Blackmagic Design

  • Posts: 978
  • Joined: Wed Aug 22, 2012 5:00 am

Re: DAVINCI 16 | Big feature request list.

PostFri May 04, 2018 5:27 am

bifericeras wrote:I installed DaVinci 15 public beta 2 days ago. Because it crashed so often that I couldn't really use it I installed today morning DaVinci 14.3. It even crashes more, I can't change System/User preferences without crashing.

... ...


Could you please post a crash log? Help menu... Capture Diagnostic logs. Upload it to a file sharing service, and post a link here, or PM me.
Rohit Gupta

DaVinci Resolve Software Development
Blackmagic Design
Offline
User avatar

Peter Benson

  • Posts: 187
  • Joined: Thu Dec 21, 2017 5:12 pm
  • Location: Eastern Time Zone, USA

Re: DAVINCI 16 | Big feature request list.

PostSat May 05, 2018 1:29 pm

Tristan Pemberton wrote:
Peter Chamberlain wrote:Tristian, both of these features are in v14.

I can use the timecode adjust now - just type it in. Be good if there was some sort of feedback for that process as it's not intuitive to just type in timecode. But happy it works.


#WowJustWOW
Exa-a-actly right. I hereby reiterate yesterday's posted "Feature Request" (sic) that an immediate fix and standard be set in place among Resolve application programmers and GUI designers, for *always* providing visual feedback [flashing cursor within a faded text field] to Resolve users who click within an editable [Timecode, or any other] *editable* text field.

Mr. Chamberlain, as a relative newcomer, I've observed this absolutely needs to become part of the process improvement culture amongst Resolve's programmers/GUI designers IMHO:

Let's reduce the number of unintentionally "hidden" features in Resolve, and instead, make them conspicuous so they are much more readily apparent and accessible to users merely poking around and experimenting in the GUI, without reading the manual.

There are in fact, quitea a number of instances, for example where features are ghosted out in their respective menu, yet, they actually are functional.

The process tree that's in place for Resolve development either needs to be adhered to -- or improved, and that's evident in the hordes of conflicts we constantly have to wade through and re-interpret while reading the Resolve Users Manual.

Thanks for Listening.

RS 14.3 | MiniMonitor | Samsung U28D590 via Spyder5 Pro | DTV 10.9.7 | Win64 8.1 | ASUS ROG G751JL, Intel i7-4720HQ, 24GB, 1TB HDD, 500GB SSD, GTX965M | Mackie MCU Pro | Softube Console 1 | Shuttle Pro 2
DTV 10.9.7 > Kingston SD5000T > MiniMonitor > Bravia | Samsung U28D590 | DRS 14.3.0.014 | Win8.1 x64 | ASUS G751JL, i7-4720HQ, 24GB | GTX965M | 1TB HDD, 500GB EVO 850 SSD | MCU Pro | Softube Console 1 Mkii | Shuttle Pro 2
Offline
User avatar

Peter Benson

  • Posts: 187
  • Joined: Thu Dec 21, 2017 5:12 pm
  • Location: Eastern Time Zone, USA

Re: DAVINCI 16 | Big feature request list.

PostSat May 05, 2018 5:56 pm

John Paines wrote:The feedback is in the right timecode field of the source or record monitor, depending on where you're entering the TC values.

Oh yeah? OK John I'll bite:
Kindly explain what *kind* of [visual] feedback exists, in*any* Timecode Text Field in Resolve (be sure to mention Resolve version number), after a user either clicks -- or even *double* clicks within a Timecode Text Field? IOW, what does the feedback look like? It must be conspicuously hidden in version 14.3, so curious minds would like to know... ;-)
DTV 10.9.7 > Kingston SD5000T > MiniMonitor > Bravia | Samsung U28D590 | DRS 14.3.0.014 | Win8.1 x64 | ASUS G751JL, i7-4720HQ, 24GB | GTX965M | 1TB HDD, 500GB EVO 850 SSD | MCU Pro | Softube Console 1 Mkii | Shuttle Pro 2
Offline

Dermot Shane

  • Posts: 1315
  • Joined: Tue Nov 11, 2014 6:48 pm

Re: DAVINCI 16 | Big feature request list.

PostSun May 06, 2018 6:38 pm

twenty five years ago i had these buttons;

s-l1600.jpg
s-l1600.jpg (81.95 KiB) Viewed 2685 times


maybe in v16 we could catch up to Accom 1993?

should note that i have this functionality on my Artist Color, Transport, XKeys, StreamDeck, Wacom and Twister already, so it's not that much use to me, if it appears on the mini it would be nice for when i freelance on one of those
Offline

Tristan Pemberton

  • Posts: 637
  • Joined: Fri Aug 08, 2014 6:07 am

Re: DAVINCI 16 | Big feature request list.

PostMon May 07, 2018 4:01 am

John Paines wrote:
Tristan Pemberton wrote:How? For the life of me I can't find information on trimming multiple clips together.


Go into Trim mode ("t") select all or draw a box around the clips you want to trim. Use "u" to toggle the edit point. Then trim using any of the methods available for single clips.

Tristan Pemberton wrote:I can use the timecode adjust now - just type it in. Be good if there was some sort of feedback for that process as it's not intuitive to just type in timecode. But happy it works.


The feedback is in the right timecode field of the source or record monitor, depending on where you're entering the TC values.

Thanks John.
Director
Australia
www.flywirefilms.com
Offline

wutongdegugeyouxiang

  • Posts: 30
  • Joined: Thu Nov 16, 2017 2:00 pm

Re: DAVINCI 16 | Big feature request list.

PostMon May 07, 2018 11:05 am

About Optimizing Media: Functional Requirements
1. The name of the generated optimized media can be stored in the defined directory just like the material name.
2. You can enable or disable this optimized media at any time.
3. You can link optimized media generated from other computers to my material instead of regenerating it.
About Render Cache: Functional Requirements
1, When you add footage to the timeline, the generated rendering cache after the footage does not disappear.
2. When an error operation is cancelled, the rendering cache can be undone, instead of disappearing.
3. Render caches are generated automatically only in the timeline visible range.
Offline

Mark Grgurev

  • Posts: 66
  • Joined: Fri Nov 03, 2017 7:22 am

Re: DAVINCI 16 | Big feature request list.

PostMon May 07, 2018 7:59 pm

It would be great if they integrated Media Express into the Media tab. Seems simple enough considering most of the functionality is already there.
Offline

roger.magnusson

  • Posts: 420
  • Joined: Wed Sep 23, 2015 4:58 pm
  • Location: Sweden

Re: DAVINCI 16 | Big feature request list.

PostMon May 07, 2018 9:04 pm

I'd like resizable popup windows where applicable. I know... "don't use a laptop". But sometimes you have to and there are a number of windows in Resolve that can't be resized or where all the content can't even be viewed.
  • The Project Server window
  • Fairlight - Format Assign
  • Fairlight - Link Group
  • Fairlight - Patch Input/Output
In the Fairlight windows mentioned above you can't even see the Cancel/OK buttons! That's on a 13" MacBook Pro. The Edit and Color pages work fine though.
Offline

Reynaud Venter

  • Posts: 515
  • Joined: Sun May 28, 2017 9:34 am

Re: DAVINCI 16 | Big feature request list.

PostMon May 07, 2018 9:09 pm

roger.magnusson wrote:That's on a 13" MacBook Pro
Enabling the “More Space” Display option in System Preferences was the biggest change, enabling the Resolve UI to be workable on a 15” MacBook Pro.
[*]MacBook Pro Retina 15.4” | 2.8GHz Core i7 | OS X.12.6 (16G1510) | 16GB RAM | 512GB SSD | Resolve Studio 15 beta 8
[*]Merging HAPI | Ravenna Premium VAD driver 2.0.33517 | ANEMAN 1.1.6 (36513) | Digital Audio Denmark AX32
Offline

roger.magnusson

  • Posts: 420
  • Joined: Wed Sep 23, 2015 4:58 pm
  • Location: Sweden

Re: DAVINCI 16 | Big feature request list.

PostMon May 07, 2018 9:29 pm

Text becomes a bit too small on the 13" for me in that mode unfortunately.
Offline
User avatar

Adrian Mcyorian

  • Posts: 13
  • Joined: Tue Mar 14, 2017 7:02 am

Re: DAVINCI 16 | Big feature request list.

PostTue May 08, 2018 7:28 am

EDIT PAGE:

Hold left click over the playhead an drag up and down = Zoom in / zoom out with focus con playhead cursor

Mousewheel over empty time line or ruler = Zoom in / Zoom Out focused on position of arrow cursor

Mousewheel + Ctrl over empty time line = Vertical Size of channels

Just try this and you see how fast improve workflow
Offline

steve oakley

  • Posts: 83
  • Joined: Fri Aug 16, 2013 6:07 pm

Re: DAVINCI 16 | Big feature request list.

PostWed May 09, 2018 7:13 am

Feature Request : Text Panel

what I need / want : a window that I can load a .txt. pdf or docx file into. might be a script, might be change notes, whatever. either way I need to reference an external text doc and flipping between another app and R is time consuming. it should be a standard feature of every NLE and no idea why it isn't. thats especially the case when both your screens are taken over by your NLE app.

Prem Pro had the story window but killed it.

there are tons of open source code options so its not like this would be a build it from scratch thing for reading the various file formats.

if I can edit txt and save it thats a bonus, but if its read only, and all you can do is scroll, that would totally be great. please !
S
Offline

Trevor Asquerthian

  • Posts: 217
  • Joined: Sun May 11, 2014 10:03 am

Re: DAVINCI 16 | Big feature request list.

PostWed May 09, 2018 7:28 am

steve oakley wrote:Feature Request : Text Panel

it should be a standard feature of every NLE and no idea why it isn't.


File|new script in Avid (which you can then line up clips/subclips to, even without scriptsync option)
R15.0.b6 - testing on...
macOS Sierra 10.12.6
MBP 2.6 i7 16GB RAM NVIDIA GT750M
Offline

steve oakley

  • Posts: 83
  • Joined: Fri Aug 16, 2013 6:07 pm

Re: DAVINCI 16 | Big feature request list.

PostWed May 09, 2018 6:26 pm

as V2 of this feature sure. something like script sync would easily be a cycle or two on its own. I'd MUCH rather have a simple window I could load and scroll text docs into right now, or in the next release because doing it is a LOT less time to write & debug. I'd rather see a simple text window read more file formats than wait a couple years for script sync to show up which would be of limited use to a small set of users.

Trevor Asquerthian wrote:
steve oakley wrote:Feature Request : Text Panel

it should be a standard feature of every NLE and no idea why it isn't.


File|new script in Avid (which you can then line up clips/subclips to, even without scriptsync option)
S
Offline
User avatar

Leslie Wand

  • Posts: 369
  • Joined: Wed Jul 24, 2013 5:56 am
  • Location: rural nsw, australia

reverse wipe button please

PostFri May 11, 2018 1:30 am

such a simple request for an even simpler operation ;-)

as per this thread:

https://forum.blackmagicdesign.com/viewtopic.php?f=21&t=73740
www.lesliewand.com.au
Offline

Ian Duncan

  • Posts: 57
  • Joined: Wed Aug 09, 2017 6:55 pm
  • Location: Los Angeles

Re: DAVINCI 16 | Big feature request list.

PostFri May 11, 2018 2:20 pm

aborady wrote:
seanross67 wrote:Within a project, I need timelines with variable resolutions and frame rates. Once this happens, I will build a Resolve only pipeline.
Thats the only reason i camt switch totally from premier to DR as a daily driver editing software coz lots of the projects i have clients always ask to have different adaptations for different platforms or usually digital advertising screens for now in DR theres no way to have these kind of projects i dunno how it hasnt been implemented till now

Sent from my SM-G955F using Tapatalk



This is key if we are to use Resolve in place of premiere for a project.
Cheers,

Ian


Machine:
Custom Built Win10 Pro
Intel Core i9-7980X
GIGABYTE X299 DESIGNARE EX
Samsung 960 PRO Series 512 for OS and 2TB for cache
128gb DDR4 3000
2 x TitanXp GPU
External black magic Decklink 4k through thunderbolt 3
10GBE Nic
Offline

Ian Duncan

  • Posts: 57
  • Joined: Wed Aug 09, 2017 6:55 pm
  • Location: Los Angeles

Re: DAVINCI 16 | Big feature request list.

PostFri May 11, 2018 2:21 pm

Trevor Asquerthian wrote:
Andy Mees wrote:
All track timecode display/overlays are a basic feature of professional NLE systems...


+1


+1
Cheers,

Ian


Machine:
Custom Built Win10 Pro
Intel Core i9-7980X
GIGABYTE X299 DESIGNARE EX
Samsung 960 PRO Series 512 for OS and 2TB for cache
128gb DDR4 3000
2 x TitanXp GPU
External black magic Decklink 4k through thunderbolt 3
10GBE Nic
Offline

Ian Duncan

  • Posts: 57
  • Joined: Wed Aug 09, 2017 6:55 pm
  • Location: Los Angeles

Re: DAVINCI 16 | Big feature request list.

PostFri May 11, 2018 2:25 pm

Dermot Shane wrote:twenty five years ago i had these buttons;

s-l1600.jpg


maybe in v16 we could catch up to Accom 1993?

should note that i have this functionality on my Artist Color, Transport, XKeys, StreamDeck, Wacom and Twister already, so it's not that much use to me, if it appears on the mini it would be nice for when i freelance on one of those


To expand, I am also using 3rd party remapping and macro software. But without that, just much more customization keyboard short cuts and remapping.

For example if I want my mouse scroll to zoom a timeline.

It's not going to reduce hardware sales. Its likely to make the software more usable which leads to more hardware purchases.
Cheers,

Ian


Machine:
Custom Built Win10 Pro
Intel Core i9-7980X
GIGABYTE X299 DESIGNARE EX
Samsung 960 PRO Series 512 for OS and 2TB for cache
128gb DDR4 3000
2 x TitanXp GPU
External black magic Decklink 4k through thunderbolt 3
10GBE Nic
Offline

Ian Duncan

  • Posts: 57
  • Joined: Wed Aug 09, 2017 6:55 pm
  • Location: Los Angeles

Re: DAVINCI 16 | Big feature request list.

PostFri May 11, 2018 3:11 pm

Replace clip functionality beyond what already exists. F11

For example right click on a file, or clip, or other and choose replace. Then choose a file from a file browser.

Also replace clip functionality that exists in most other editors and compositors. Dragging a file from the media window onto the clip while holding some kind of modifier key.

I am constantly getting updated comps and i need to replace them and not have to use the clunky F11 replace clip functionality.
Cheers,

Ian


Machine:
Custom Built Win10 Pro
Intel Core i9-7980X
GIGABYTE X299 DESIGNARE EX
Samsung 960 PRO Series 512 for OS and 2TB for cache
128gb DDR4 3000
2 x TitanXp GPU
External black magic Decklink 4k through thunderbolt 3
10GBE Nic
Offline
User avatar

Gary Hango

  • Posts: 65
  • Joined: Mon Apr 09, 2018 10:35 pm
  • Real Name: Gary Hango

Re: DAVINCI 16 | Big feature request list.

PostFri May 11, 2018 3:48 pm

Feather control of edges in the clip transform controls.
Microsoft Windows 10 Pro x64
Version 10.0.16299 Build 16299
Intel(R) Core(TM) i7-6700, 3.40GHz, 32.0 GB
MB: MSI, BIOS: American Megatrends Inc. A.60, 12/17/2015
NVIDIA GeForce GTX 960, 2Gb
The latest Resolve Beta (Standard)
Offline

Valdo Rochas

  • Posts: 12
  • Joined: Fri May 31, 2013 5:55 pm

Re: DAVINCI 16 | Big feature request list.

PostFri May 11, 2018 5:39 pm

Put everything from Fusion into it
and make "Ultimate" all in one version of Davinci Resolve , along with other versions you have already
Offline

Christian Lessner

  • Posts: 35
  • Joined: Thu Aug 18, 2016 8:56 am
  • Location: Hamburg, Germany

Re: DAVINCI 16 | Big feature request list.

PostFri May 11, 2018 8:50 pm

Feature request: Show current clip without speed changes

Similar to "Show current clip with handles". It would be helpful to properly track clips that have extreme speed changes but need to be rendered as individual source clips in the end.
Offline

georgekg

  • Posts: 21
  • Joined: Sat Sep 23, 2017 8:23 pm
  • Real Name: Aleksandar Djordjevic

Re: DAVINCI 16 | Big feature request list.

PostFri May 11, 2018 11:08 pm

Jim Simon wrote:Version 15 still automatically deselects Render Queue jobs when new jobs are added. I'd love for them to remain selected until that job is finished, manually deselected, or manually deleted.

So if I add three jobs in a row, then hit Render, all three jobs will be rendered.


+1

and a few ones:

- separate render window/app/or whatever BMD will calling it, will be usefull. With powerfull enough machine, I can start render project(s) and go back to start/finish another project while render is in progress. I'm doing this all the time in Premiere - edit while Media encoder do the render, without wasting the time to wait for render to finish. But, because of Resolve's philosophy to put few apps in the same "house" solution may be an option to Deliver page can be independent, so I can go back and start new project while rendering is in progress in Deliver page.
- less aggressive and much precise snapping (when snapping is selected) in edit page, especially when timeline is zoomed out
- some kind of indicator of timeline in edit page so I could know where I'm with the edit in the timeline. Or small window with some representation of whole timeline and position of the playhead like Premiere 6.5 (in old days) had. When I have large (long) timeline, I must always look at the time in the window which is disstractive. Graphical representation takes less time to see where I am right now in the timeline than looking at the time or timecode.
adobe_premiere65_scr.jpg
adobe_premiere65_scr.jpg (63.46 KiB) Viewed 2453 times

- right now I'm in Resolve 14 and if clips are not selected, "alt+t" does nothing. If "selection follows playhead" is selected, only one clip is automatically selected and "alt+t" puts default transition on both sides of that (selected) clip, and that is totally unusefull. I don't need transition at the beggining and at the end of the one clip. I need transiotion at the cut, between two clips. Premiere have much better solution - with "ctrl+d" it puts default transition between clips when playhead is near enough to the cut, even when timeline playback is in progress. Resolve should implement the same or something similar, because it is very good and timesaving solution.
- playhead should move along with the clip, i.e. to stay at the same position relative to the clip (and not relative to time, like it does now) when I do ripple delete. Of course, when playhead is at the right side of the gap. When it is at the left side of the gap it won't move, because left side is not moving when I do ripple delete :)
- option to resize preview window in Edit page, because sometimes I need it bigger than program window and sometime I need it smaller.
Offline
User avatar

Peter Benson

  • Posts: 187
  • Joined: Thu Dec 21, 2017 5:12 pm
  • Location: Eastern Time Zone, USA

Re: DAVINCI 16 | Big feature request list.

PostSat May 12, 2018 12:42 am

Ian Duncan wrote:For example if I want my mouse scroll to zoom a timeline.


Are we to undersrand you're requesting a macro that essentially duplicates Resolve's current Timeline Zoom In/Out feature, via the Option/Alt + mouse scroll wheel shortcut?

Sent from my P00I using Tapatalk
DTV 10.9.7 > Kingston SD5000T > MiniMonitor > Bravia | Samsung U28D590 | DRS 14.3.0.014 | Win8.1 x64 | ASUS G751JL, i7-4720HQ, 24GB | GTX965M | 1TB HDD, 500GB EVO 850 SSD | MCU Pro | Softube Console 1 Mkii | Shuttle Pro 2
Offline
User avatar

danielstonehouse

  • Posts: 122
  • Joined: Thu Jun 26, 2014 2:33 am

Re: DAVINCI 16 | Big feature request list.

PostMon May 14, 2018 2:22 am

Christian Lessner wrote:Feature request: Show current clip without speed changes

Similar to "Show current clip with handles". It would be helpful to properly track clips that have extreme speed changes but need to be rendered as individual source clips in the end.


+1

How about “show current clip without sizing” while we are at it

Or all three variables (handles, speed changes, sizing) could be combined into “show as source with handles”

Shift up + show handles on the panel?



Sent from my iPhone using Tapatalk
Offline
User avatar

waltervolpatto

  • Posts: 5965
  • Joined: Thu Feb 07, 2013 5:07 pm
  • Location: Burbank, CA

Re: DAVINCI 16 | Big feature request list.

PostWed May 16, 2018 6:40 pm

Shape, tracking, the ability to use the inside OR the outside of the shape for tracking.

Two examples: of i do a gradient in the sky, from top to bottom, often there is nothing to track in the sky.

If i draw a shape in a live tv, i need to track the outside room, not the content of the tv.
SuperServer 5039AD-I
C9X299-PGF - DDR4-2400 16x4 GB
i9-7920xCPU 12c 2.90GHz Water cooled
2x NVIDIA GeoForce GTX 1080ti
DeckLink Studio 4K
Window10 - Resolve Studio

Inb4YouCanJustColorComments: yes you can, good luck with that.
Offline

Dermot Shane

  • Posts: 1315
  • Joined: Tue Nov 11, 2014 6:48 pm

Re: DAVINCI 16 | Big feature request list.

PostWed May 16, 2018 8:21 pm

i move the window to what can be tracked (trees on the horizion)
then move it back and resize to what i want to change (sky)
same with the tv, track the edge, then move/resize the window, usualy i don't want more than the edge of the mon, tracking something with different z depth is problematic

i'm sure Walter is aware of these workarounds, really mentioned them in case others can put them in their tool box

haveing fusion mattes routed to the color page would go along way towards sorting these issues
Offline

Jim Simon

  • Posts: 1110
  • Joined: Fri Dec 23, 2016 1:47 am

Re: DAVINCI 16 | Big feature request list.

PostWed May 16, 2018 11:57 pm

Valdo Rochas wrote:Put everything from Fusion into it


What's missing?
Offline

Richard Dean

  • Posts: 91
  • Joined: Tue Jul 28, 2015 11:27 pm

Re: DAVINCI 16 | Big feature request list.

PostThu May 17, 2018 4:49 am

Request - Stripe new audio - replace track on previously output file.

After outputting a QT which took time to render, it would be great if you could replace just the audio track or subtitle track. I know the Old quicktime Pro could do this but it would be nice if Resolve was able.
Offline
User avatar

waltervolpatto

  • Posts: 5965
  • Joined: Thu Feb 07, 2013 5:07 pm
  • Location: Burbank, CA

Re: DAVINCI 16 | Big feature request list.

PostThu May 17, 2018 6:03 am

Dermot Shane wrote:i move the window to what can be tracked (trees on the horizion)
then move it back and resize to what i want to change (sky)
same with the tv, track the edge, then move/resize the window, usualy i don't want more than the edge of the mon, tracking something with different z depth is problematic

i'm sure Walter is aware of these workarounds, really mentioned them in case others can put them in their tool box

haveing fusion mattes routed to the color page would go along way towards sorting these issues


yes I'm aware, but it is a workaround..
SuperServer 5039AD-I
C9X299-PGF - DDR4-2400 16x4 GB
i9-7920xCPU 12c 2.90GHz Water cooled
2x NVIDIA GeoForce GTX 1080ti
DeckLink Studio 4K
Window10 - Resolve Studio

Inb4YouCanJustColorComments: yes you can, good luck with that.
Offline
User avatar

waltervolpatto

  • Posts: 5965
  • Joined: Thu Feb 07, 2013 5:07 pm
  • Location: Burbank, CA

Re: DAVINCI 16 | Big feature request list.

PostThu May 17, 2018 6:05 am

the ability to create a compound node EVEN IF you have only one node selected.

I prefer to work with a predefined node structure, and if I select two nodes to make a compound one (to make some difficult things inside) I will break the structure. and besides, why not?
SuperServer 5039AD-I
C9X299-PGF - DDR4-2400 16x4 GB
i9-7920xCPU 12c 2.90GHz Water cooled
2x NVIDIA GeoForce GTX 1080ti
DeckLink Studio 4K
Window10 - Resolve Studio

Inb4YouCanJustColorComments: yes you can, good luck with that.
Offline

Andreas Schwarz

  • Posts: 221
  • Joined: Sat Feb 20, 2016 12:57 pm

Re: DAVINCI 16 | Big feature request list.

PostThu May 17, 2018 6:39 am

I would like to have a better dual screen layout on the Fusion page...
Offline

Peter Chamberlain

Blackmagic Design

  • Posts: 4632
  • Joined: Wed Aug 22, 2012 7:08 am

Re: DAVINCI 16 | Big feature request list.

PostThu May 17, 2018 11:28 am

Andreas Schwarz wrote:I would like to have a better dual screen layout on the Fusion page...


Cool, please pm to me how you would like it layed out. I’m happy to hear suggestions
DaVinci Resolve Product Manager
Offline

Ian Duncan

  • Posts: 57
  • Joined: Wed Aug 09, 2017 6:55 pm
  • Location: Los Angeles

Re: DAVINCI 16 | Big feature request list.

PostThu May 17, 2018 7:40 pm

Support Smart Codec Rendering of DNX and Cineform. This feature crushes in premiere for finishing.

So we can pick up where renders left off or crashed and do drop ins without re rendering entire sequences.
Cheers,

Ian


Machine:
Custom Built Win10 Pro
Intel Core i9-7980X
GIGABYTE X299 DESIGNARE EX
Samsung 960 PRO Series 512 for OS and 2TB for cache
128gb DDR4 3000
2 x TitanXp GPU
External black magic Decklink 4k through thunderbolt 3
10GBE Nic
Offline

Trevor Asquerthian

  • Posts: 217
  • Joined: Sun May 11, 2014 10:03 am

Re: DAVINCI 16 | Big feature request list.

PostThu May 17, 2018 7:58 pm

The ability to ‘insert edit’ video and or seperate audio tracks into an MXF file would be very cool. Cinedeck do it and Avid have a limited version.
R15.0.b6 - testing on...
macOS Sierra 10.12.6
MBP 2.6 i7 16GB RAM NVIDIA GT750M
Offline

steve oakley

  • Posts: 83
  • Joined: Fri Aug 16, 2013 6:07 pm

Re: DAVINCI 16 | Big feature request list.

PostThu May 17, 2018 9:31 pm

+1 and ability to replace audio tracks which was in previous post. FWIW, a couple months ago I had clips with audio that needed some TLC - noise reduction, leveling as sound guy was, um, a foul up. It was easy enough to process the audio in any number of apps, but to replace the fixed sound back into the original clips ?

any number of apps couldn't do it. in the end, I brought the fixed audio + original media into resolve, synced the new audio up, removed the old audio and then did a render to individual clips. this worked because R kept clip metadata like original TC in tact. THANK YOU GUYS FOR THAT !

so yes my grading app is now my audio fix it utiliity app !

S

Trevor Asquerthian wrote:The ability to ‘insert edit’ video and or seperate audio tracks into an MXF file would be very cool. Cinedeck do it and Avid have a limited version.
S
Offline

Andrzej

  • Posts: 5
  • Joined: Thu May 17, 2018 9:56 am
  • Real Name: Andrzej Magnuszewski

Re: DAVINCI 16 | Big feature request list.

PostFri May 18, 2018 1:06 pm

Hi everyone,
Thank you for such a great upgrade that make me think to switch to Resolve for my video jobs. However, three things come to my mind right away:
1. MUlTI CAMERA sound syncing. Especially when you have many shots from many cameras and you need them to sync all at once. AP for instance creates many sequences alphabetically.
2. COLOR MARKING of DUPLICATED frames on a timeline. Something like old FCP used to have or AP.
3. PNG image seq export.
Offline

GuyMannerings

  • Posts: 38
  • Joined: Fri Sep 09, 2016 4:34 pm

Re: DAVINCI 16 | Big feature request list.

PostFri May 18, 2018 5:09 pm

I would love some way to have an icon show on the thumbnail of a piece of media if that piece of media has been used in a timeline in the project (and even an option to show the icon only for the currently active timeline). Let's call it a the "used icon".

So, the options would be:-

Display used icon when used in current timeline.
Display used icon when used in any timeline in current project.
Do not display used icon.

I know I can flag media manually, but the problem with that is then it displays flags all over my timeline, which is distracting. Also, the amount of time this takes really adds up over 600 clips or so when covering an event.
Offline

johnford

  • Posts: 8
  • Joined: Fri May 11, 2018 1:29 pm
  • Real Name: Wim Wenders

Re: DAVINCI 16 | Big feature request list.

PostSat May 19, 2018 12:45 am

Possibility to transform all clip markers of clips in a given timeline into timeline markers (or else, possibility to export all markers of a given timeline, including clip markers).
Offline

johnford

  • Posts: 8
  • Joined: Fri May 11, 2018 1:29 pm
  • Real Name: Wim Wenders

Re: DAVINCI 16 | Big feature request list.

PostSat May 19, 2018 1:05 am

Possibility to make new clips out of clips linked with subtitles (presently, dragging a linked subtitled clip looses the subtitles).
Offline

Dylan Evans

  • Posts: 65
  • Joined: Mon May 27, 2013 8:57 am

Re: DAVINCI 16 | Big feature request list.

PostSat May 19, 2018 1:27 pm

I have been hoping for a custom filename output for stills for a long time, or at least a 'don't overwrite existing files' option for stills export.
Offline
User avatar

Peter Benson

  • Posts: 187
  • Joined: Thu Dec 21, 2017 5:12 pm
  • Location: Eastern Time Zone, USA

Re: DAVINCI 16 | Big feature request list.

PostSat May 19, 2018 10:39 pm

After a clip marker is created, users ought to be able to drag it left-to-right and see in real-time, the marker position update -- during the dragging operation (both, in terms of source time code by default, and optionally, by the source frame number).

The current scenario in Resolve Studio 14.3 is counter-intuitive, forcing users to grope in the dark for workarounds, like employing the play bar and "bug-prone" timecode overlay before knowingly parking the clip marker where we want.

RS 14.3.0.014 | MiniMonitor | DTV 10.9.7 | Win64 8.1 | ASUS ROG G751JL, Intel i7HQ, 24GB, 1TB HDD, 500GB EVO 850 SSD, GTX965M | Mackie MCU Pro | Softube Console 1 | Shuttle Pro 2
DTV 10.9.7 > Kingston SD5000T > MiniMonitor > Bravia | Samsung U28D590 | DRS 14.3.0.014 | Win8.1 x64 | ASUS G751JL, i7-4720HQ, 24GB | GTX965M | 1TB HDD, 500GB EVO 850 SSD | MCU Pro | Softube Console 1 Mkii | Shuttle Pro 2
Offline

johnford

  • Posts: 8
  • Joined: Fri May 11, 2018 1:29 pm
  • Real Name: Wim Wenders

Re: DAVINCI 16 | Big feature request list.

PostMon May 21, 2018 2:28 pm

Allow manual sync of more than one audio clip to a given video clip.
Offline

Seth Goldin

  • Posts: 281
  • Joined: Wed Nov 04, 2015 7:43 pm

Re: DAVINCI 16 | Big feature request list.

PostMon May 21, 2018 9:48 pm

"Expand all" and "collapse all" functions for the left panel of the Media Pool.
Offline

Ian Duncan

  • Posts: 57
  • Joined: Wed Aug 09, 2017 6:55 pm
  • Location: Los Angeles

Re: DAVINCI 16 | Big feature request list.

PostTue May 22, 2018 7:09 pm

The node window should have the name of the group in it. If the shot is in a group.
Attachments
Capture.PNG
Capture.PNG (15.2 KiB) Viewed 1933 times
Cheers,

Ian


Machine:
Custom Built Win10 Pro
Intel Core i9-7980X
GIGABYTE X299 DESIGNARE EX
Samsung 960 PRO Series 512 for OS and 2TB for cache
128gb DDR4 3000
2 x TitanXp GPU
External black magic Decklink 4k through thunderbolt 3
10GBE Nic
Offline
User avatar

waltervolpatto

  • Posts: 5965
  • Joined: Thu Feb 07, 2013 5:07 pm
  • Location: Burbank, CA

Re: DAVINCI 16 | Big feature request list.

PostWed May 23, 2018 5:09 am

clip menu should be visible and accessible when lightbox mode is on. (Color page)
SuperServer 5039AD-I
C9X299-PGF - DDR4-2400 16x4 GB
i9-7920xCPU 12c 2.90GHz Water cooled
2x NVIDIA GeoForce GTX 1080ti
DeckLink Studio 4K
Window10 - Resolve Studio

Inb4YouCanJustColorComments: yes you can, good luck with that.
Offline

Peter Chamberlain

Blackmagic Design

  • Posts: 4632
  • Joined: Wed Aug 22, 2012 7:08 am

Re: DAVINCI 16 | Big feature request list.

PostWed May 23, 2018 5:16 am

waltervolpatto wrote:clip menu should be visible and accessible when lightbox mode is on. (Color page)


if i understand your request.. the clips and lightbox are different representations of the same.. difficult to put on two monitors.. but.. in v15 you can select live timeline gallery view.. so use that in dual monitor mode with the same timeline set as you are grading on.
DaVinci Resolve Product Manager
Offline
User avatar

waltervolpatto

  • Posts: 5965
  • Joined: Thu Feb 07, 2013 5:07 pm
  • Location: Burbank, CA

Re: DAVINCI 16 | Big feature request list.

PostWed May 23, 2018 1:13 pm

Peter Chamberlain wrote:
waltervolpatto wrote:clip menu should be visible and accessible when lightbox mode is on. (Color page)


if i understand your request.. the clips and lightbox are different representations of the same.. difficult to put on two monitors.. but.. in v15 you can select live timeline gallery view.. so use that in dual monitor mode with the same timeline set as you are grading on.


No, the clip menu where you can select "show me unbranded clips" or shoe me group ### or show me smart filter "banana".

I don't need the thumbnails, but the ability to search abs display. Now i have to exit the lightbox, select From the clip menu, go back in the lightbox
SuperServer 5039AD-I
C9X299-PGF - DDR4-2400 16x4 GB
i9-7920xCPU 12c 2.90GHz Water cooled
2x NVIDIA GeoForce GTX 1080ti
DeckLink Studio 4K
Window10 - Resolve Studio

Inb4YouCanJustColorComments: yes you can, good luck with that.
Offline

johnford

  • Posts: 8
  • Joined: Fri May 11, 2018 1:29 pm
  • Real Name: Wim Wenders

Re: DAVINCI 16 | Big feature request list.

PostSun May 27, 2018 11:23 am

Implement "merged" instead of "linked" clips, like in Premiere. "Merged" clips have the audio channels fully integrated and behave like "real" clips in all situations.
PreviousNext

Return to DaVinci Resolve

Who is online

Users browsing this forum: BMNewb, Brad Hurley, Dave Dugdale, jormagaume, JPOwens, Patrick Taylor, Ron Simmons, ropbo, wolfgang hershey and 41 guests