DAVINCI 16 | Big feature request list.

Get answers to your questions about color grading, editing and finishing with DaVinci Resolve.
  • Author
  • Message
Offline

Seth Goldin

  • Posts: 374
  • Joined: Wed Nov 04, 2015 7:43 pm

Re: DAVINCI 16 | Big feature request list.

PostThu Nov 29, 2018 10:15 pm

It'd be great to have an option on the Deliver page, perhaps with a checkbox, to concatenate all scaling operations.

Here's a workflow I just did this week:
  1. Import 6K source media
  2. Change project settings so that timelines are 2K, and work in 2K
  3. When ready to render, change project settings to 4K
  4. Render "single clip" at 4K
Here would be a more convenient workflow:
  1. Import 6K source media
  2. Change project settings so that timelines are 2K, and work in 2K
  3. When ready to render, go to the Deliver page, select 4K for the single-clip output, and check a box named "Concatenate scaling operations"
I am very grateful that Resolve is "resolution-independent," but currently the scaling operations throughout the pipeline can't be concatenated, so you must go to Project Settings and change the timeline resolution. If, as in the first workflow I listed out above, I were to neglect to change the Project Settings from 2K back to 4K before rendering, the scaling pipeline would be: 6K to 2K and then back up to 4K, and I definitely would not want that.
DaVinci Resolve Studio 15.2.1.005
CentOS Linux 7.3 [Blackmagic Design custom ISO]
Windows 10 Pro 1803 17134.376
HP Z8 G4
1x Intel® Xeon® Gold 6136
48 GB (6x8 GB) DDR4-2666 ECC Registered RAM
1x GeForce GTX 1080 Ti
Offline

Syrzyk

  • Posts: 1
  • Joined: Fri Nov 30, 2018 3:38 pm
  • Location: Podkowa Leśna, Polska
  • Real Name: Paweł Syrzycki

Re: DAVINCI 16 | Big feature request list.

PostFri Nov 30, 2018 7:52 pm

1) Edit page - Edit index

Currently list is fixed with a few ways to search it or filter it. What would be a great improvement is possibility to sort it by columns - for example to easily sort by reel names.

And second thing - clicking item on that list should select that clip in timeline. Also selecting multiple elements should select all these clips in timeline.

2) Color page - Adding nodes

Adding serial node to a node that splits on output into two parallel:

Image

So what it does now is adding node after the split as an input to only first splitted node:

Image

What it should do is add it BEFORE the split:

Image

If I wanted current functionality I would go to Node #2 and added Serial Before

3) Color page - super annoying bug

With some release there was implemented Shared Node which is really great. By default newly created Shared Node is locked so it wouldnt be accidentally changed across whole project easily. Thats awesome too - I just cannot understand why do You allow RESET SELECTED NODE on a locked node. This is definitely a bug (15.1.1.005 here).

Also it would be nice if new shared node carried name of a node it was before

Thanks
DaVinci Resolve Studio 15.1.1.005
AMD Ryzen 7 1700X
Windows 10 Pro x64
32GB RAM
1 x GTX 1080 Ti
Offline

Jim Simon

  • Posts: 1428
  • Joined: Fri Dec 23, 2016 1:47 am

Re: DAVINCI 16 | Big feature request list.

PostSat Dec 01, 2018 4:29 pm

Seth Goldin wrote:the scaling pipeline would be: 6K to 2K and then back up to 4K


Are you sure that's true? I would assume that when Individual Clips is selected the timeline resolution (and hence scaling) is ignored.
Offline

Seth Goldin

  • Posts: 374
  • Joined: Wed Nov 04, 2015 7:43 pm

Re: DAVINCI 16 | Big feature request list.

PostSat Dec 01, 2018 5:35 pm

Jim Simon wrote:
Seth Goldin wrote:the scaling pipeline would be: 6K to 2K and then back up to 4K


Are you sure that's true? I would assume that when Individual Clips is selected the timeline resolution (and hence scaling) is ignored.


I believe it’s true for “single clip” exports of the timeline, which is what I was delivering for convenience to the online editor.


Sent from my iPhone using Tapatalk
DaVinci Resolve Studio 15.2.1.005
CentOS Linux 7.3 [Blackmagic Design custom ISO]
Windows 10 Pro 1803 17134.376
HP Z8 G4
1x Intel® Xeon® Gold 6136
48 GB (6x8 GB) DDR4-2666 ECC Registered RAM
1x GeForce GTX 1080 Ti
Offline
User avatar

Jean Claude

  • Posts: 1848
  • Joined: Sun Jun 28, 2015 4:41 pm

Re: DAVINCI 16 | Big feature request list.

PostSat Dec 01, 2018 6:12 pm

Blackmagic RAW Player
Link : https://www.blackmagicdesign.com/products/blackmagicraw

Review Blackmagic RAW clips with consistent color between software
Download Blackmagic RAW Player => only "Mac OS X "

I hope someday we will also have a version for Windows? (and why not Linux) :)
thank you in advance (and all the sensor data displayed?) :oops:
Windows 10 PRO X64 1803 | DaVinci Resolve Studio 15.2.1.005 | Fusion Studio 9.0.2 | Decklink Studio 4K 6G | Desktop Video 10.10.14 | Nvidia 416.34
Offline

Sharingan80

  • Posts: 2
  • Joined: Tue Sep 18, 2018 8:47 am
  • Real Name: Deelan Sital

Re: DAVINCI 15/16 | feature request list.

PostMon Dec 03, 2018 10:51 am

To be able to have the option of taking the RENDER QUEUE over when saving as a new project, rather than discarding entierly.
ALSO to be able to customise the render order when you create a queue. Currently its not movable once created.
It'll be a timesaver to sort them out for HD renders / 2K renders / Colourspace types etc.
EVEN better if we can have folders in here that would make the organisation alot better.

One of the great benefits to me or some people here who deal with localisation and have to export various iteration / versions of files, organised into assorted folder locations setup with in the RENDER QUEUE.

My general process is setup a template and setup a render queue in tandam. However this becomes slightly tedious when you save the project as another iteration the render queue is discarded and you have to set it all up again.

Its fine when working directly in the same project. however doing localisation gets the project bloated with media assets, so we split into projects per country.

thanks
Offline

Hector Corcin

  • Posts: 46
  • Joined: Sun Aug 23, 2015 8:38 pm

Re: DAVINCI 16 | Big feature request list.

PostMon Dec 03, 2018 8:57 pm

Power Smart bins. Like Smart Bins but available to all projects. Or option to convert on/off one smart bin to a power smart bin.
Offline

ohimbz

  • Posts: 10
  • Joined: Wed Nov 14, 2018 8:54 am
  • Location: Romania
  • Real Name: Musetoiu Florin

Re: DAVINCI 16 | Big feature request list.

PostMon Dec 03, 2018 9:43 pm

Sound FX library to actually have a visual list of what`s inside ... many of my audio files have a name .... not what it represents ...

Also being able to search by Genere pulled from within the file would be lovely.
Offline

Eric Testroete

  • Posts: 28
  • Joined: Mon Feb 06, 2017 4:13 pm

Re: DAVINCI 16 | Big feature request list.

PostWed Dec 05, 2018 5:07 pm

A way to select and delete multiple (hundreds) of transition at once.

Right now there is no way to select multiple transitions and delete them with out either deleting the clips they are on (draw a window) or selecting transitions one at a time.
Offline

Pacific

  • Posts: 82
  • Joined: Tue May 08, 2018 9:45 pm
  • Real Name: Robert Wilde

Re: DAVINCI 16 | Big feature request list.

PostWed Dec 05, 2018 9:44 pm

Bring us DaVinci Resolve 15 without the bugs.

Negative things gone missing is my number 1 feature request!
Offline

Seth Goldin

  • Posts: 374
  • Joined: Wed Nov 04, 2015 7:43 pm

Re: DAVINCI 16 | Big feature request list.

PostThu Dec 06, 2018 4:32 am

It used to be, perhaps in 14, that in the database manager window, you could right-click and immediately enter a remote rendering window. In 15, it seems that this option has been removed. Why? Now I must open up a regular project in the same database and then click Workspace in the menu bar to access remote rendering.

Please bring back the option to enter a remote rendering window by right-clicking in the database manager window.


Sent from my iPhone using Tapatalk
DaVinci Resolve Studio 15.2.1.005
CentOS Linux 7.3 [Blackmagic Design custom ISO]
Windows 10 Pro 1803 17134.376
HP Z8 G4
1x Intel® Xeon® Gold 6136
48 GB (6x8 GB) DDR4-2666 ECC Registered RAM
1x GeForce GTX 1080 Ti
Offline

etang77

  • Posts: 68
  • Joined: Mon Aug 27, 2018 8:51 am
  • Real Name: Eric Tang

Re: DAVINCI 16 | Big feature request list.

PostThu Dec 06, 2018 9:28 am

Allow a even more customisable timeline size:

Right now I don't have an option where I can have the Audio at the minimize track size, with Video having thumbnails or filmstrips.
Offline

chamoas

  • Posts: 2
  • Joined: Thu Dec 06, 2018 11:57 pm
  • Real Name: Oscar Ascencio

Re: DAVINCI 16 | Big feature request list.

PostFri Dec 07, 2018 1:02 am

Coming from Premier I owl love to see couple of things in the next Dv or in any updates.

1. To be able to sync videos in the time line as it is now you can just sync video and audio or multicam, but if you have. full video and need to add short videos to on top of the long one you are not able to do it as DaVinci don't let you sin audios from 2 videos in the timeline. sometime I use cameras for different angles but this cameras are not recording the entire time or have limit time recording so if I create multicam Dv would create a 4,5,6.... angles regardless is is just 2 or 3 cameras but footage contain time gaps. In Premier you can just simple select 2 videos in the time line and right click and select sync audios. that is a time saver.

2. Would be great if you can unlock panels and relocated them, as with 2 screens default config location of the windows is a bit odd for me doesn't work with the effects panels and is no way I can change it locations, maybe give couple of precomposed panels configuration to choose from.

3. Be able to create templates from fusion that you can use in the editing timeline without having to change the main Fusion composition every time you need to do a change, example, when creating lower-thirds in AE you can create a template and select the options you would need to leave open for the user to change; like name, position, font type etc.. and then exported and use it a precompose animation in premier , so you just change the names of your participants without the need to going in to the main file to do it. As it is now Fusion has great capabilities but still a bit far from AE, hopefully gets more friendly to the user and it would kill Adobe for sure.
Offline
User avatar

Andy Mees

  • Posts: 224
  • Joined: Wed Aug 22, 2012 7:48 am

Re: DAVINCI 16 | Big feature request list.

PostFri Dec 07, 2018 1:52 am

chamoas wrote:3. Be able to create templates from fusion that you can use in the editing timeline without having to change the main Fusion composition every time you need to do a change, example, when creating lower-thirds in AE you can create a template and select the options you would need to leave open for the user to change; like name, position, font type etc.. and then exported and use it a precompose animation in premier , so you just change the names of your participants without the need to going in to the main file to do it. As it is now Fusion has great capabilities but still a bit far from AE, hopefully gets more friendly to the user and it would kill Adobe for sure.


You can do this in DaVinci Resolve Fusion Page too. I'm not the right person to teach you how, check the manual, but I've set up a number of Fusion Title templates that I use directly from the edit page with only the specific controls I need. Basically you just build your composition, select everything but the Media Out, and tell Fusion to save it as a 'macro' ( identify the controls you need available) - and put it in the Fusion > Templates > Edit folder. Beware, that's off the top of my head and I may have misremembered the steps / missed something.

Unfortunately this only works for creating Title templates ... would be great if they expanded the functionality to support Effect templates too. (Similar to FCPX's ability to use Effects, Generators and Title templates that are built in and published from Apple Motion ).
Windows 10 Pro (1809) | Resolve 15.2.1 - on an old and tired 4 core 3.6 GHz i7 (i7-3820) with 24GB RAM and a lowly 6GB GTX 1060 (399.24) -- at home, Mac OS X 10.14.1 on a 6 core 2.6 GHz i7 MBPro (I7-8850H) with 32GB RAM and 4GB Radeon Pro 560X.
Offline

studio1492

  • Posts: 11
  • Joined: Fri Oct 26, 2018 6:22 pm
  • Real Name: Fran Navas

Customization of International Keyboards

PostFri Dec 07, 2018 9:48 am

REQUEST: Support for international keyboards on the Keyboard Customization tool. Version 15.2 shows the "US English" keyboard only.

Anyway, big thanks for implementing the keyboard customization tool!
Offline

studio1492

  • Posts: 11
  • Joined: Fri Oct 26, 2018 6:22 pm
  • Real Name: Fran Navas

Some functions on scopes.

PostFri Dec 07, 2018 1:46 pm

I still haven't found a quick shortcut (keyboard, mouse or panel) to switch between the diferent Scopes (Vectroscope-Histogram etc...) except for the current drop-down menu method, which is time consuming and not quick at all, as it involves the microcosmic use of the mouse. Some shortcut functions (like vectroscope) exist on the keyboard customizator, but they don't act ¡! on the scope window (or I haven't found how to make it work). Watching a parade of x2 and x4 scopes together when Scopes area is attached to the main workspace (when there is no dual screen) may help too.

As an alternative, my proposal is to switch between scopes hovering the mouse over the scope area while moving the mouse wheel up/down, or perhaps by clicking on the scope space, as at the current version of DVR scopes have no functionallity when clicking over them or hovering the mouse.

Additionally, it will be great (and perhaps useful) to hold SHIFT or ALT or CTRL ... over the scopes to see the affected area highlighted on the frame display.
Last edited by studio1492 on Fri Dec 07, 2018 3:50 pm, edited 1 time in total.
Offline
User avatar

Jed Mitchell

  • Posts: 80
  • Joined: Tue Nov 03, 2015 11:04 pm
  • Location: New York, NY

Re: DAVINCI 16 | Big feature request list.

PostFri Dec 07, 2018 3:50 pm

Consistent middle-mouse drag behavior in all panels, including 1-dimensional scrolling panels like Clips, Media Pool, Inspector, etc.

How it works:
Use the middle mouse button drag operation to "grab" every panel and drag it up-down / left-right as an alternative to a scroll wheel. This currently exists in the Edit timeline, Color page node panel & viewers (and Timeline though in a very weird way), and in every panel on the Fusion page (other than, conspicuously, the panels taken from the rest of Resolve like Clips & Media Pool). Hell, this even works in the Scopes for some reason where it's probably more of a con than a pro.

Why would you want this?
In Fusion you can drag through long lists of node settings in the Inspector panel -- this is incredibly useful and much faster for tablet users (a lot of colorists & compositors) who do not have a dedicated scroll wheel, and for whom MMB dragging is easily the best way to get around in the panels where it already works. In particular this would be incredibly useful for drag-scrolling through big lists in the Media Pool or Effects Library.


Just import this functionality from the Fusion panels that already have it, it clearly works fine with the existing Resolve interface and the middle mouse button has no assigned functionality in most of the panels where this behavior would be implemented.
"It's amazing what you can do when you don't know you can't do it."

System:
DR15.2 | Win10 | i9 7940X | 128GB RAM | 2x 1080 Ti | 960Pro Cache Disk
Offline

studio1492

  • Posts: 11
  • Joined: Fri Oct 26, 2018 6:22 pm
  • Real Name: Fran Navas

Re: DAVINCI 16 | Big feature request list.

PostFri Dec 07, 2018 4:24 pm

FEATURE 1: When working in Color and the viewer is playing the current clip, switching to another clip stops the playing. Also clicking any other time position on the transport bar on the viewer stops the playing.
It will be great that when Play is on, the viewer keeps playing resuming at the beggining of the new selected clip, or resumes playing on the new time position when clicking the position bar on the viewer.

FEATURE 2: Mouse wheel moves the time position when is over the position bar below the frame viewer (and also on the Tracker's playhead in Color).

FEATURE 3: SHIFT+vertical mouse wheel maximices or minimices the clip size on the timeline clips. This is currenty working on Fairlight timeline, but not on Edition Timeline.
Offline

Michael Tiemann

  • Posts: 304
  • Joined: Fri Jul 05, 2013 11:22 am

Re: DAVINCI 16 | Big feature request list.

PostFri Dec 07, 2018 5:49 pm

It is possible to write automation data to Fairlight audio tracks (such as A1), and it is then possible to edit the resulting keyframes using the UI.

It is also possible to write automation data to Fairlight busses (such as the Main Output level), but it is not possible to then edit the resulting keyframes using the UI.

There should be a way to edit keyframes on Fairlight busses, not only audio tracks.
MacOS Sierra Version 10.14.1
iMac Pro (2017)
3 GHz Intel Xeon W
64GB 2666 MHz DDR4
Radeon Pro Vega 64 16 GB
Red Rocket-X in Sonnet III-D via Thunderbolt 3
Offline

Nathan Morgan

  • Posts: 261
  • Joined: Wed May 20, 2015 3:02 pm

Re: DAVINCI 16 | Big feature request list.

PostFri Dec 07, 2018 10:18 pm

Camel.PNG
Camel.PNG (7.16 KiB) Viewed 219 times


If you have a continuous selection of video (aka no filler gaps) even if it is spread across multiple tracks. When you hit delete on it it should pull up the video all the way and not leave any gap.

DaVinci currently will leave a gap the length of the V1 filler segment as seen in the below picture. This is not the desired operation.

Camel After.PNG
Camel After.PNG (3.85 KiB) Viewed 219 times
PC: Resolve 15.2, Windows 10, GTX Titan X
(All bug reports etc. are PC unless specified.)
Mac: Macbook Pro 15", Resolve 15.2.0.033, 10.12.6
Terrablock 24D Shared Storage on 10G network
Offline
User avatar

waltervolpatto

  • Posts: 6275
  • Joined: Thu Feb 07, 2013 5:07 pm
  • Location: Burbank, CA

Re: DAVINCI 16 | Big feature request list.

PostFri Dec 07, 2018 11:26 pm

I wonder why change a behavior that has been there for years:

When duplicate timeline, leave the "copy " wording at the end so the alphabetical order does not change.

Most important, up to 14, upon duplicate the timeline, the new timeline was automatically selected, it is not the case anymore.
Can we revert to the previous behaviour?

Group, upon selecting a group, the timeline was jumping on an actual shot that belong to the group. Now just sit on black.
Can we revert back?

Shot with flash in color, select the flag and press backspace should remove the flag, nor arbitrarily delete a node...
SuperServer 5039AD-I
C9X299-PGF - DDR4-2400 16x4 GB
i9-7920xCPU 12c 2.90GHz Water cooled
2x GTX 1080ti DeckLink Studio 4K
Window10 - Resolve Studio 15.0.1.003
nvidia dr: 398.82
Offline

Jaw327

  • Posts: 4
  • Joined: Thu Aug 23, 2018 5:12 am
  • Real Name: Joshua Williams

Re: DAVINCI 16 | Big feature request list.

PostSat Dec 08, 2018 12:55 am

please for the love of god finally fix the HDPI display issue. This has been a problem for years now. It makes resolve unusable with windows 10 and a 4K monitor
Offline

chamoas

  • Posts: 2
  • Joined: Thu Dec 06, 2018 11:57 pm
  • Real Name: Oscar Ascencio

Re: DAVINCI 16 | Big feature request list.

PostSat Dec 08, 2018 2:33 am

1. The ability to change the settings after you start a project. For now in a coming update could be the option of asking every time you open a new project what settings fo you wanna choose because regardless of your presets is always by default the same 24fps Full HD. to be able to import other projects or timelines from other projects in to my current one, so I don't have to close the project every time I need to import some cuts form another project.

2. An option to close current project, so the of ware brings you to the welcome screen, instead of having to close the software every time you need to close a project.
Offline

Aaron Hinton

  • Posts: 42
  • Joined: Sat Mar 07, 2015 5:46 pm

Re: DAVINCI 16 | Big feature request list.

PostSat Dec 08, 2018 2:59 am

My feature requests:
1. If the ResolveFX grain could actually export on handles when applied on the clip level, that would be great.
2. Please allow the Tangent Element panel to access and modify camera RAW controls. (And letting Tangent use their Tangent Mapper software with Resolve would also be very kind of you).
3. Please make it so original ISO and white balance camera RAW settings can be excluded from project-based RAW settings, if so desired. (Meaning, having the ability to change gamma curve and color space settings per project whilst preserving the cinematographer's original ISO and white balance settings).
4. Apple-licensed ProRes encoding on Windows machines (much like Assimilate Scratch). If this requires an additional license fee, that's fine.
5. More flexibility to resize specific elements of the UI, much like in Adobe's software suite.
6. The ability automatically (if so desired) apply color adjustments when another instance of a clip is imported with an XML. For example, if a DIT colored footage when making proxies, importing a locked XML will then automatically apply the DIT's color that already exists in the project. This feature could exist as a checkbox upon importing the XML, much like the "sizing information" checkbox.
7. The ability to create standard .cdl files.
Aaron Hinton
Offline

etang77

  • Posts: 68
  • Joined: Mon Aug 27, 2018 8:51 am
  • Real Name: Eric Tang

Re: DAVINCI 16 | Big feature request list.

PostSat Dec 08, 2018 2:19 pm

There's a variety of display in relations to the time, "Source Timecode", "Source Frame", etc. Right now, what ever one chooses to display, the numbers you input is always the timecode.

Please make it that when it's displaying frame count, the numbers you enter is to the frame count and not the timecode.

With regards to search in Bin, let there be a selection like in Finder on Mac, search within the folder or search all bins. Because for the last project, I had to dump everything into one folder for easier search access...

Is there a ways to save simple "settings"? I know about the preset. But right now, I'm having to re-select some options from the drop down menu, like "Selection Follow Playhead"
Offline
User avatar

Dax Roggio

  • Posts: 25
  • Joined: Fri Mar 22, 2013 3:53 pm
  • Location: Philadelphia

Re: DAVINCI 16 | Big feature request list.

PostSat Dec 08, 2018 9:48 pm

waltervolpatto wrote:I wonder why change a behavior that has been there for years:

When duplicate timeline, leave the "copy " wording at the end so the alphabetical order does not change.

Most important, up to 14, upon duplicate the timeline, the new timeline was automatically selected, it is not the case anymore.


Is it possible to duplicate a timeline at all anymore? The option seems to have disappeared entirely. (It’s only been a crucial part of my workflow since the beginning of time.) I’ve been copying and pasting as a workaround, but that requires several additional steps to accomplish what duplicate used to do in one.
Offline
User avatar

waltervolpatto

  • Posts: 6275
  • Joined: Thu Feb 07, 2013 5:07 pm
  • Location: Burbank, CA

Re: DAVINCI 16 | Big feature request list.

PostSun Dec 09, 2018 5:24 am

Dax Roggio wrote:
waltervolpatto wrote:I wonder why change a behavior that has been there for years:

When duplicate timeline, leave the "copy " wording at the end so the alphabetical order does not change.

Most important, up to 14, upon duplicate the timeline, the new timeline was automatically selected, it is not the case anymore.


Is it possible to duplicate a timeline at all anymore? The option seems to have disappeared entirely. (It’s only been a crucial part of my workflow since the beginning of time.) I’ve been copying and pasting as a workaround, but that requires several additional steps to accomplish what duplicate used to do in one.


Select a timeline. Edit- duplicate clips will duplicate the timeline
SuperServer 5039AD-I
C9X299-PGF - DDR4-2400 16x4 GB
i9-7920xCPU 12c 2.90GHz Water cooled
2x GTX 1080ti DeckLink Studio 4K
Window10 - Resolve Studio 15.0.1.003
nvidia dr: 398.82
Offline

Gabriele Gelfo

  • Posts: 85
  • Joined: Mon May 13, 2013 4:51 pm

Re: DAVINCI 16 | Big feature request list.

PostSun Dec 09, 2018 8:20 am

vectorial UI
resizable windows
detachable windows
icon editor (buttons) for custom commands or scripts
100% customizable interface: button, menus, right click mouse button menu

regards
n°1 iMac Retina 5K 27 Late 2014 - i7 4GHz - 32GB - R9 M295X 4GB
n°4 Windows 10 workstations with 4xTitans 6GB, 4xTitans X 12GB, 4xGTX1080s 8GB, 2xGTX1080Ti 11GB - i7 processors 3.2 Ghz - 24GB
Da Vinci Resolve Studio
Offline

studio1492

  • Posts: 11
  • Joined: Fri Oct 26, 2018 6:22 pm
  • Real Name: Fran Navas

GUI requests

PostMon Dec 10, 2018 10:51 am

REQUEST 1: Customizable toolbar on Edit Window.
It will be great to custom edit the current timeline toolbar corresponding to the personal needs of each editor, removing unused tools, or adding new ones with its corresponding icon. The new tools for the bar can be:
- Clip Color
- Render Cache Mode
- Selection Follows Playhead
- Show duplicate frames
- Switch Multicam Angle
- Change Clip Speed
... The list of candidate tools for the toolbar is huge. Customizing that bar according to the style and needs of each editor will be a great plus and time saver.

REQUEST 2: Dynamic Toolbars Layout
In order to gain vertical pixels on the workspace to see the video preview window much bigger and accurate on single display systems (laptops, etc), both the timeline toolbar and the bottom toolbar mode may be switchable to 4 different modes:
- Horizontal (this is the current default mode up to v15.2, but wasting vertical pixels, which means a tiny video preview on laptops)
- Vertical and resizable Toolbar (it may look like the Audio Mixer on the Edit Timeline workspace).
- Detacched from workspace (like on Premiere default mode, however not my personal cup of tea)
- Hide Toolbar (Useful for advanced users who work with dedicated keyboard shortcuts and enjoy a clean workspace. This mode will be my personal choice).

REQUEST 3: When opening the Keyboard Customization Tool, remember and show up the last edited shortcut.

REQUEST 4: In Media Pool, right clicking a timeline may offer the he ability to Duplicate a timeline (currently one has to copy and paste inside, which does the trick).

REQUEST 5: On the GUI highlight modified values against default values.
In Color/Inspector, etc it would be great to highlight when a numeric value has been modified from the default value. This may help to quickly find which values have been modified avoiding to read by eye the individual number of each parameter, accelerating the edition process. There are many ways to highlight it (bold, underline the box of the value, green for positive red for negative, background color of the GUI box, border of the value box...), however it should be discrete but easily identifiable.

REQUEST 6: Keyboard shortcuts to switch on/off the workspaces shown on the Upper Bar (Media Pool, Nodes, Inspector...). Then the ability of minimize or hide that Upper Bar, in order to gain the precious vertical space on laptops.

REQUEST 7: Tab Key switches between the pages of the selected working window.
For example, When working with Curves, Tab key quickly switches to Custom->Hue Vs Hue->Hue Vs Sat etc.
When Working with Wheels, Tab key quickly switches to primary wheels->Bars->Log.
You can recognize that the dots that switch to the different pages of the workspace requiere microcosmic use of the mouse, which at the end of the journey means a waste of time and energy.
Aditionally, it will be MAGIC to use the mouse wheel to toggle the pagination of the working space, specially curves, scopes, and wheels-bars-log.

REQUEST 8:
In Color, when a Curve has been modified, then highlight (with a different color) the paginating dots that shortcuts the corresponding Curve. This can also be applied to "Sizing", "Color Wheels" "Log" and any other workspace that has shortcuts with dots. This helps to identify if a given curve or space has modifications inside without the need of opening it to inspect it.
This can be done by changing the color of the dot of the corresponding curve, or perhaps adding a coloured border.
Attachments
Captura de pantalla 2018-12-10 a las 11.05.46 a. m..png
Captura de pantalla 2018-12-10 a las 11.05.46 a. m..png (83.6 KiB) Viewed 114 times
Offline

Paul Russell

  • Posts: 47
  • Joined: Tue Feb 05, 2013 1:04 pm

Re: DAVINCI 16 | Big feature request list.

PostTue Dec 11, 2018 7:00 am

Pro Res export on PC please.

If it's good enough for Adobe, it should be part of Resolve Studio.

https://theblog.adobe.com/adobe-pro-vid ... -0p2pW8Qkk
Calamity Studio
Offline

studio1492

  • Posts: 11
  • Joined: Fri Oct 26, 2018 6:22 pm
  • Real Name: Fran Navas

Re: DAVINCI 16 | Big feature request list.

PostTue Dec 11, 2018 11:04 am

REQUEST 1: On edit timeline: Right click on any Timeline tab shows "Close the other timelines" when there are several timelines opened in tabs and we want to focus on just one single timeline.

REQUEST 2: Working in timeline, holding CRTL(mac) (or any other key combination) when moving a clip to a new position, simply changes the order of the clip, closing the gap on the old position, and opening a gap on the new position it will occupy. This is great to change the order of clips from clips 1-2-3 to 3-2-1.
(If this is already possible with mouse and alternative key, please let me know how to do it, as I haven't found it after trying really hard)
Offline
User avatar

waltervolpatto

  • Posts: 6275
  • Joined: Thu Feb 07, 2013 5:07 pm
  • Location: Burbank, CA

Re: DAVINCI 16 | Big feature request list.

PostTue Dec 11, 2018 2:07 pm

studio1492 wrote:REQUEST 1: On edit timeline: Right click on any Timeline tab shows "Close the other timelines" when there are several timelines opened in tabs and we want to focus on just one single timeline.

REQUEST 2: Working in timeline, holding CRTL(mac) (or any other key combination) when moving a clip to a new position, simply changes the order of the clip, closing the gap on the old position, and opening a gap on the new position it will occupy. This is great to change the order of clips from clips 1-2-3 to 3-2-1.
(If this is already possible with mouse and alternative key, please let me know how to do it, as I haven't found it after trying really hard)


Yes it is possible, it's a modifier key plus click and drag IIRC.

Manual it...
SuperServer 5039AD-I
C9X299-PGF - DDR4-2400 16x4 GB
i9-7920xCPU 12c 2.90GHz Water cooled
2x GTX 1080ti DeckLink Studio 4K
Window10 - Resolve Studio 15.0.1.003
nvidia dr: 398.82
Previous

Return to DaVinci Resolve

Who is online

Users browsing this forum: AndreasOberg, Bing [Bot], Christian Lessner, Google Feedfetcher, Paul Dore and 37 guests