Using ATEM with Panasonic Camera

Questions about ATEM Switchers, Camera Converter and everything live!
  • Author
  • Message
Offline

suliman

  • Posts: 1
  • Joined: Thu Jan 17, 2019 7:50 am
  • Real Name: Muha Suliman

Using ATEM with Panasonic Camera

PostThu Jan 17, 2019 8:02 am

I have Panasonic HC-WXF995 camera, can i use ATEM Television Studio for live production with these cameras?
Offline

Denny Smith

  • Posts: 11103
  • Joined: Thu Aug 01, 2013 4:19 pm
  • Location: USA, Northern Calif.

Re: Using ATEM with Panasonic Camera

PostThu Jan 17, 2019 7:35 pm

While it technically is possible, not sure why you would want to choose this lower end consumer camera.
It is a HDMI out, so using this will depend on which ATEM you choose.

The new ATEM HD has four HDMI inputs, but you are going to be limited to a 15-feet, or less, cable length. To use a long cable run, you will need to get a HDMI to SDI Converter as use the in if the SDI inputs in the ATEM.

Another issue is getting the images to match, as their is no way to control color balance or shading via the ATEM with these cameras. I tried to use small Panasonic HD camcorders in a ,ive switchiysitustion, and ended up replacing them with Broadcast type cameras, as getting them to match color balance and image look, was next to impossible, even though they were the same model camera.

You might want to look at using the BM Micro Studio Cameras instead. They have SDI in and outs, can be controlled by the ATEM and are designed for live switching applications. They take a variety of MFT lenses as well as adapted lenses.
Cheers
Denny Smith
SHA Productions
Offline

David Cox

  • Posts: 3
  • Joined: Sat Jan 19, 2019 4:26 pm
  • Real Name: David Cox

Re: Using ATEM with Panasonic Camera

PostSat Jan 19, 2019 8:28 pm

Hi today I managed to run both Panasonic HC X920 and the 970's which are much earlier cameras, on the ATEM HD. Hope that helps.You have no control of the camera, ATEM is for switching.
Offline
User avatar

Thomas Seewald

  • Posts: 1163
  • Joined: Fri Aug 24, 2012 11:57 am

Re: Using ATEM with Panasonic Camera

PostThu Jan 24, 2019 8:07 am

You can use every camera, when the technical output fits to the ATEM settings.
thos-berlin - Thomas S e e w a l d

Return to Live Production

Who is online

Users browsing this forum: No registered users and 13 guests