VITC on black burst

Ask software engineering and SDK questions for developers working on Mac OS X, Windows or Linux.
  • Author
  • Message
Offline

max_verem

  • Posts: 14
  • Joined: Tue Nov 05, 2013 3:10 pm

VITC on black burst

PostThu Jun 25, 2020 8:04 am

Some sync/signal generators (like https://www.tek.com/datasheet/spg8000a- ... -datasheet) can provide VITC in Black Burst output signal.

So question is: any decklink board are capable to get that timecode signal from black burst that sent to reference input bnc?
Offline

Cameron Nichols

Blackmagic Design

  • Posts: 315
  • Joined: Mon Sep 04, 2017 4:05 am

Re: VITC on black burst

PostFri Jun 26, 2020 10:13 am

Hi Max,

No, timecode capture from the reference input is not supported on DeckLink cards.

Regards
Cameron
Offline

cameronleeperlm

  • Posts: 6
  • Joined: Thu Nov 21, 2019 8:57 pm
  • Real Name: Cam Leeper

Re: VITC on black burst

PostMon Jul 27, 2020 10:41 pm

@Cameron
So I am assuming based on [2.4.13] there isn't a way to provide a external reference clock to the capture card.
"All sources providing the signal to the capture devices must have their clocks synchronized. This can be achieved by providing the sources with a common reference input."
Is that assumption correct? I'm looking for the best way to try and synchronize with other system data.

In 2.5.4.17 IDeckLinkInput::GetHardwareReferenceClock it says
The GetHardwareReferenceClock method returns a clock that is locked to the system clock
which I assume that is what is used with the IDeckLinkVideoInputFrame::GetHardwareReferenceTimestamp as well. Can you expound more on how it is locked to the system clock? Clock resolution? Precision? Accuracy? My capture card is on a Windows machine.

I know I can count on the relative time between timestamps of frames. I'm trying to figure out the best way to synchronize with other system data and not sure the best way to timestamp since they are on a different clock.
Offline

arvind12345

  • Posts: 2
  • Joined: Mon Nov 09, 2020 1:06 pm
  • Real Name: Arvind Singh

Unable to Capture timecode

PostWed Jan 13, 2021 10:55 am

I am not able to capture timecode during Capture video from SDK using Capture binary.


Capturing with the following configuration:
Ubuntu 18.04 system
Decklink Intecity 4K capture card with HDMI input video from Roku device

Output console logs:
Capturing with the following configuration:
- Capture device: Intensity Pro 4K
- Video mode: 1080p59.94
- Pixel format: 8 bit BGRA (4:4:4)
- Audio channels: 2
- Audio sample depth: 16 bit
Frame received-gTAF (#0) [No timecode] - Valid Frame - Size: 8294400 bytes
Frame received-gTAF (#1) [No timecode] - Valid Frame - Size: 8294400 bytes
Frame received-gTAF (#2) [No timecode] - Valid Frame - Size: 8294400 bytes
Frame received-gTAF (#3) [No timecode] - Valid Frame - Size: 8294400 bytes
Frame received-gTAF (#4) [No timecode] - Valid Frame - Size: 8294400 bytes
Stopping Capture

Also in CapturePreview there is no Ancillary data .

Can I get help on this. Please let me know if any more information required from my side.

Looking forward a great response.

Thanks
Arvind

Return to Software Developers

Who is online

Users browsing this forum: No registered users and 2 guests