LCD screen issues (tilta modification kit) BMPCC 6K G1

Got something to discuss that's not about Blackmagic products? Then check out the Off-Topic forum!
  • Author
  • Message
Offline

chesbrougha

  • Posts: 6
  • Joined: Fri Dec 06, 2013 2:45 pm

LCD screen issues (tilta modification kit) BMPCC 6K G1

PostSun Nov 10, 2024 6:54 pm

Attached all the components but basically this is a Blackmagic cinema camera 6K. When I bought it, I made the dumb decision to buy the Tilde modification kit and have it installed by ASC camera Pro.

From the beginning, there were issues. The NVMe SSD, which is seated behind the tilting LCD screen would lose connection intermittently.
-But ok I could use a SD card.

Now I can’t press of the record or settings tab within settings, which makes the camera unusable. Combine this with the fact that the LCD screen randomly zooms in and or jumps too the menu.

Below is the video.

https://share.icloud.com/photos/0f7q4kC ... giHrru6RvQ

Here are my questions looking for any and all opinions based on experience:
1. Has this occurred to anybody else? Have they found that it was a cable issue LCD hardware or internal circuitry?
2. Does anybody have any recommendations of a place that can fix black magic cameras? (I will be googling this, but just curious if anybody has had very good experiences with
3. The design for the NVMESSD in this mod is actually pretty cool but the screen itself is so low nit that it’s worthless anywhere with direct light. Has anyone done any mods with a larger and or higher nit screen.
4. Anyone out there with this tilta MOD kit. Would be interested in hearing of your experiences on or if this mod has ever been 99% reliable

Goal
1. And goal is to have a reliable camera with no recording limits for studio use.

Thanks, everyone

Below is a picture of what the rear of the camera looks like.

Image


Sent from my iPhone using Tapatalk
Offline

chesbrougha

  • Posts: 6
  • Joined: Fri Dec 06, 2013 2:45 pm

Re: LCD screen issues (tilta modification kit) BMPCC 6K G1

PostSun Nov 10, 2024 6:59 pm

I forgot to attach all the componentsImage


Sent from my iPhone using Tapatalk

Return to Off-Topic

Who is online

Users browsing this forum: Lifeofparty and 2 guests