Page 1 of 1

why not BlackMagic MiniCamStream ?

PostPosted: Mon Apr 12, 2021 12:04 pm
by marteloudini
Hello BlackMagic,

I think you have conquered a very large audience with your Atem Mini (Pro) (Extreme) (ISO), but especially among people who are not professionals. And so I was wondering if you wouldn't make non-professional but quality cameras given your experience it really shouldn't be complicated.
Light type cameras for streaming, cameras that do not need all the features that you have up the sleeve, which will be perfectly adapted to your ecosystem of Atem mini.
1) max 1080p 60p resolution;
2) hdmi only;
3) ultra small;
4) 1 inch sensor;
5) large battery life and usb-c connector (powerbank);
6) can be controlled by Mini Extrême (ISO);
7) no need to record, just broadcast (since your ISO ATEMs can do it);
8) <400 €;

Which I think would be a shame, either by one or a pack of 3 cams.
A bridge between actionCam, Reflex and your professional cameras.

It is clear that many cannot afford to spend at least 1000 € per camera for streaming, without making films.

But the guarantee for ATEM owners to have a quality and a BlackMagic ecosystem.

? :D

Re: why not BlackMagic MiniCamStream ?

PostPosted: Mon Apr 12, 2021 3:29 pm
by Mark Foster
why should blackmagic do this to itself?
in an area where gopro is the top dog, dji has already failed.

Re: why not BlackMagic MiniCamStream ?

PostPosted: Mon Apr 12, 2021 6:17 pm
by Xtreemtec
1" Sensor + UltraSmall + Sub$400 :lol: :lol: :lol: :lol:

Did you mean 0.1" sensor? Or maybe 1MP sensor? You clearly do not know what a 1" Sensor cost.. But often more then $1000+ for the sensor only as it such a large surface..

Re: why not BlackMagic MiniCamStream ?

PostPosted: Tue Apr 13, 2021 8:35 am
by marteloudini
Mark Foster wrote:why should blackmagic do this to itself?
in an area where gopro is the top dog, dji has already failed.


sérious ? gorpo, i dont like the qualité movie in hard condition light.

Re: why not BlackMagic MiniCamStream ?

PostPosted: Tue Apr 13, 2021 8:46 am
by marteloudini
Xtreemtec wrote:1" Sensor + UltraSmall + Sub$400 :lol: :lol: :lol: :lol:

Did you mean 0.1" sensor? Or maybe 1MP sensor? You clearly do not know what a 1" Sensor cost.. But often more then $1000+ for the sensor only as it such a large surface..


yes it is a challenge, see the Insta360 ONE R 1". ok it is at $600 but do many many features i dont want.

it is the same thing with the Blackmagic Micro Cinema Camera, but for streaming i dont need recording card, and raw. Just pathtrough signal.
what sensor size ? the Blackmagic Micro Cinema Camera have super 16 (what is it ?)
how many time run in pathtrough signal with Vbatterie basiquely (more as record)?

for me and the power of BlackMagic Team can do a small but powerfull streaming cam.

And dont forget, with blackmagic the lens in't include :-)

Re: why not BlackMagic MiniCamStream ?

PostPosted: Thu Apr 15, 2021 3:14 pm
by marteloudini
when I see what DJI is doing with their dji Air 2S, seriously.
The cameras could even send wireless over 10 km at 1080p 60fps and the sensor is 1 inch, can go to 5K, and it measures a few centimeters.

Re: why not BlackMagic MiniCamStream ?

PostPosted: Sun May 02, 2021 3:11 pm
by marteloudini
The time of stream feature is very started..
See Atomos

Atomos Ninja Stream
Last, but not least, there is also the Atomos Ninja Stream, which offers simultaneous recordings of both ProRes and H.264/5 proxy with shared file names and timecode. It will also be capable of sending video feeds to other Ninja’s, smart devices, or web-based platforms simultaneously.

Video feeds are shared with others on set via Wi-Fi to devices and Ethernet 1Gbe at up to 300m. This allows you to livestream your content around the world without the need for a computer.

why not BlackMagic dont create with the same box of micro camera cinema, but remove the expansion connectic.
add 2 antenna for wifi 2.4 and 5.0 ghz;
add a real usb-c for power;
and keep the hdmi for stable flux video.

1" sensor, 1080p 60p in wifi and 4K 30p with hdmi.

symbiose with Atem Mini Extrême Pro Iso, add with the cam a little receiver wifi with hdmi female with that can receive the signal wifi of mini cam stream on other square and connect little hdmi cable on this and Atem miniExtreme.

Re: why not BlackMagic MiniCamStream ?

PostPosted: Fri May 14, 2021 8:50 am
by Shrinivas Ramani

Re: why not BlackMagic MiniCamStream ?

PostPosted: Sun May 23, 2021 4:45 pm
by marteloudini
Shrinivas Ramani wrote:https://www.blackmagicdesign.com/products/blackmagicmicrocinemacamera


seriously ? i have already see that. But you dont have read my post.


another accessory with powerfull advantage iFoo H2 Pro, use the band wirelesse "mmwave".