Quad Split

Getting started with a Blackmagic product? Ask questions here about setup and installation.
  • Author
  • Message
Offline

maniacpony

  • Posts: 6
  • Joined: Sun Feb 03, 2013 11:40 am

Quad Split

PostMon Sep 26, 2022 11:47 am

Has anyone discovered the optimim settings on the Multiview 4 to minimise the frame delay? I'm using one with a 4K TV to show the desktop output of 4 computers in their native resolution at 1920x1080.

I appreciate there's always going to be some frame delay through the Multiview and the telly itself, as I can't sync the output of the graphics cards on seperate PCs, but wondered if anyone had already come up with a solution?
As the sources all run through HDMI to SDI converters, I wondered if gen lock could help, but Blackmagic HDMI to SDIs don't come with gen lock, so that's a non starter.

Cheers.
Offline
User avatar

Xtreemtec

  • Posts: 5154
  • Joined: Wed Jan 02, 2013 11:48 am
  • Location: The Netherlands

Re: Quad Split

PostMon Sep 26, 2022 12:12 pm

The BMD MV always had a big latency issue..

Personally we use Decimator MV's for non Atem setups. As they are still the fastest MV we have seen.
Daniel Wittenaar .:: Xtreemtec Media Productions ::. -= www.xtreemtec.nl =-
4K OBV Trailer, ATEM TVS HD, 4M/E Broadcast Studio 4K, Constelation 8K, Hyperdeck Studio 12G, Ursa Broadcast 4K, 4K fiber converters with Sony Control

Return to Getting Started

Who is online

Users browsing this forum: No registered users and 10 guests