Intensity 4k - Video not showing up in BlackMagic
Posted: Mon Jan 17, 2022 6:53 am
Hello all, very new to video capture. Short story, bought an intensity 4k PCI capture card to capture old video tapes. Running Windows 10 on a ridiculously souped-up new PC. Connected the video out from the video camera to the analog right and left audio. The video is connected to the green 8 Y IN connector. When I open the Black Magic Media express utility it does not show the video in the window. I switched the video out to the blue 9 B-Y IN cable with the same results.
I checked in the Black Magic desktop video setup utility and everything is set to composite.
The video was playing on the video camera in VCR 'play" mode.
I checked the device manager and the card is showing up with no errors.
Any advice? I am completely new to this. I did go through the manuals but they are very vague regarding troubleshooting and nothing specific to this problem.
Thanks in advance for any and all help.
I checked in the Black Magic desktop video setup utility and everything is set to composite.
The video was playing on the video camera in VCR 'play" mode.
I checked the device manager and the card is showing up with no errors.
Any advice? I am completely new to this. I did go through the manuals but they are very vague regarding troubleshooting and nothing specific to this problem.
Thanks in advance for any and all help.