Blackmagic Forum

Hi
Is the only gimbal out there that can power the BMPCC4k the Moza Air 2? or is there others?

It says:
Camera Power Supply Port: 2mm DC 7.8V
Peripherals Power Supply Port: DC5521 16.8V

no, the old DJI ronin-S could also supply the 4k with power.
however, the battery power dropped from 10 hours to 2 hours : -(

Mark Foster wrote:no, the old DJI ronin-S could also supply the 4k with power.
however, the battery power dropped from 10 hours to 2 hours : -(

Not the Air 2S it says:
Camera Power Supply Port: 2mm DC 7.8V
Peripherals Power Supply Port: DC5521 16.8V

Would those not work?

The early Air 2s had problems with it's 12V port when powering a BMPCC 4K. It was fixed on models that have a 16.8V port.

You need to order a special cable to control the camera.
Air 2 triggers BMPCC 4K record with latest firmware version V1.0.4, but you need an optional cable like this.

https://store.gudsen.com/products/mc3-p ... trol-cable

Is that cable only needed to control the camera if you want to which power cable do you use to power the camera with from the gimbal please?

Murathan Yildiz wrote:

"very high quality cable for powering bmpcc through moza air 2 gimbal."

Alvin's Cables Blackmagic Pocket Cinema 4K BMPCC 4K Locking DC Power Cable W2FZDCTH $29.99 USD

https://www.amazon.com/Alvins-Cables-Bl ... 405&sr=8-4

Thank you very much everyone. I will keep you updated on how I get along