Encoding for playback on Hyperdeck Studio

Getting started with a Blackmagic product? Ask questions here about setup and installation.
  • Author
  • Message
Offline

dbinkard

  • Posts: 8
  • Joined: Fri Sep 21, 2012 12:13 am
  • Real Name: Daniel Binkard

Encoding for playback on Hyperdeck Studio

PostThu Feb 07, 2013 10:38 pm

I'd like to prepare video files for playback on the Hyperdeck Studio using Adobe Media Encoder CS6. So far, I've tested encoding Quicktimes with the DNxHD codec and trying to match my ATEM environment, but seem to be using the wrong settings, as nothing will show up on the Hyperdeck. The deck is set for the DNxHD format.

Does anyone have a list of settings for Adobe Media Encoder to encode for Hyperdeck Studio playback? I'm using the unit in an ATEM setup at 1080i5994.

Regards,
Daniel
Offline

dbinkard

  • Posts: 8
  • Joined: Fri Sep 21, 2012 12:13 am
  • Real Name: Daniel Binkard

Re: Encoding for playback on Hyperdeck Studio

PostFri Feb 08, 2013 4:43 pm

After further testing, I've found these settings for Adobe Media Encoder CS6:

Format: Quicktime
Video Codec: Avid DNxHD Codec
Codec Settings:
Color Levels: 709
Alpha: None
Resolutions: 1080i/59.94 DNxHD 220 10-bit
Frame Rate: 29.97
Field Order: Upper First
Aspect: Square Pixels

Pre-encoded video playback is now possible with the Hyperdeck Studio. Audio does not appear to run.

Current audio settings:

Audio Codec: Uncompressed
Sample Rate: 48000 Hz
Channels: Stereo
Sample Size: 24 bit

If anyone has recommendations for getting audio to work, I'd be happy to hear them.
Offline

dbinkard

  • Posts: 8
  • Joined: Fri Sep 21, 2012 12:13 am
  • Real Name: Daniel Binkard

Re: Encoding for playback on Hyperdeck Studio

PostWed Feb 13, 2013 5:11 pm

Thanks to Julian at Blackmagic, the following encoder settings work to get video and audio from the Hyperdeck Studio:

Adobe Media Encoder CS6

Format: Quicktime
Video Codec: Avid DNxHD Codec
Codec Settings:
Color Levels: 709
Alpha: None
Resolutions: 1080i/59.94 DNxHD 220 10-bit
Frame Rate: 29.97
Field Order: Upper First
Aspect: Square Pixels

Audio Codec: Uncompressed
Sample Rate: 48000 Hz
Channels: Stereo
Sample Size: 16 bit
Offline
User avatar

Xtreemtec

  • Posts: 5387
  • Joined: Wed Jan 02, 2013 11:48 am
  • Location: The Netherlands

Re: Encoding for playback on Hyperdeck Studio

PostWed Feb 13, 2013 5:44 pm

I think it would be essential to include this info in the Hyperdeck manual.. Saves a lot of people a lot of time... ;)
Daniel Wittenaar .:: Xtreemtec Media Productions ::. -= www.xtreemtec.nl =-
4K OBV Trailer, ATEM TVS HD, 4M/E Broadcast Studio 4K, Constelation 8K, Hyperdeck Studio 12G, Ursa Broadcast 4K, 4K fiber converters with Sony Control
Offline

Ricky Gore

  • Posts: 11
  • Joined: Fri Aug 23, 2013 8:41 pm

Re: Encoding for playback on Hyperdeck Studio

PostFri Aug 23, 2013 8:49 pm

This is still not working for me. Can you tell me what other settings might be different?

Render at Maximum Depth
Depth:
Limit data rate to 10,000 kbps
Use Maximum Render Quality
Use Frame Blending

Is there a way to export your Preset and send it to me?

(Also, I am using the HyperDeck Shuttle if that makes a difference)



...Update...
After further review I find that I can copy a video (that I recorded previously with the Shuttle) back onto the SSD and it will not playback those files either. It would be really nice if I could use this as a playback device, but to do so for now, I have to record the files with the unit and leave them on there for playback.
ATEM 2M/E, HyperDeck Shuttle, HyperDeck Pro, Canon XA25 HD Cameras, 2 TriCaster Mini SDIs, Blackmagic Web Presenter, WireCast.
Offline

dbinkard

  • Posts: 8
  • Joined: Fri Sep 21, 2012 12:13 am
  • Real Name: Daniel Binkard

Re: Encoding for playback on Hyperdeck Studio

PostTue Sep 03, 2013 3:29 pm

Here's the full rundown on my Premiere Pro CS6 export settings. These have been verified to work in the Hyperdeck Studio. Hope it is helpful.

Format: Quicktime
Export Video Yes, Export Audio Yes

Summary
Output: (output path)
1920x1080, 29.97 fps, Upper, Quality 90, Avid DNxHD Codec
Uncompressed, 48000 Hz, Stereo, 16 bit

Filters (No filters)

Video
Video Codec: Avid DNxHD Codec
Codec Settings:
Color Levels: 709
Alpha: None
Resolutions: 1080i/59.94 DNxHD 220 10-bit
Basic Video Settings
Quality: 90
1920x1080
Frame Rate: 29.97
Field Order: Upper First
Aspect: 1.0
Render at Maximum Depth (either on or off should work)
Depth: 24 bit
Key frame every 90 frames (not alterable)
Optimize Stills (off, have not tested on)
Limit data rate to 10,000 kbps (not alterable)

Audio
Audio Codec: Uncompressed
Sample Rate: 48000 Hz
Channels: Stereo
Sample Size: 16 bit

Use Maximum Render Quality (either on or off should work)
Use Frame Blending (either on or off should work)
Offline

Ricky Gore

  • Posts: 11
  • Joined: Fri Aug 23, 2013 8:41 pm

Re: Encoding for playback on Hyperdeck Studio

PostThu Oct 03, 2013 6:59 pm

Thanks for the info. Turns out I didn't have the HyperDeck set to DNxHD. So it is working great now.
I am using this setup for Live Streaming of our CEO to the entire company for a quarterly All Hands Meeting. I recently purchased the HyperDeck Pro. It is very handy. I have a live camera feed into the HyperDeck then to a Matrox MXO2 Mini w/Max. We do live video stream through Flash Live Media Encoder, then I have a pre-recorded video that our CEO want's to show before he starts speaking. I have that clip loaded onto the HyperDeck I just push play to play the clip, then hit the input button when theat's done and it goes back to the live feed. Everyone is very happy with this setup. Thanks again for the info.

Rick
ATEM 2M/E, HyperDeck Shuttle, HyperDeck Pro, Canon XA25 HD Cameras, 2 TriCaster Mini SDIs, Blackmagic Web Presenter, WireCast.
Offline

AndrewParris

  • Posts: 1
  • Joined: Mon Jul 30, 2018 5:24 am
  • Real Name: Andrew Parris

Re: Encoding for playback on Hyperdeck Studio

PostMon Jul 30, 2018 5:28 am

Does anyone have an updated answer to this question. In essence I am looking for the best format to create my clips to play back on a Hyperdeck Pro. Preferably in ProRes

adambender

Re: Encoding for playback on Hyperdeck Studio

PostFri Sep 07, 2018 3:01 pm

We have been using a totally different setup for several years with ProRes, at great success. We are running our deck at 720p, 59.94. Here are our settings:

Video
Format: Quicktime
Video Codec: Apple ProRes 422(LT) (I think anything 422 would work, we chose LT, because in our environment, you can't tell the difference)
Basic Video Settings
Quality: 90
1920x1080
Frame Rate: 59.94
Field Order: Progressive
Aspect: Square Pixels (1.0)

Audio
Audio Codec: Uncompressed
Sample Rate: 48000 Hz
Channels: Stereo
Sample Size: 24 bit


I would love if someone has used something successful h.264, since Quicktime is going away.
Offline

IsseSwe

  • Posts: 74
  • Joined: Sat Jul 07, 2018 7:16 am
  • Location: Stockholm Sweden
  • Real Name: Istvan Sandor

Re: Encoding for playback on Hyperdeck Studio

PostSun Mar 24, 2019 10:46 am

Hey all.

I want to add more infor here. I have both the Pro2 ang 12G Hyperdeck and here are my results based on your settings stated in the thread.

On the Hyperdeck studio pro 2 (but not on the Hyperdeck 12G):
    Format: Quicktime
    Video Codec: Avid DNxHD Codec
    Codec Settings:
    Color Levels: 709
    Alpha: None
    Resolutions: 1080i/59.94 DNxHD 220 10-bit
    Frame Rate: 29.97
    Field Order: Upper First
    Aspect: Square Pixels

    Audio Codec: Uncompressed
    Sample Rate: 48000 Hz
    Channels: Stereo
    Sample Size: 24 bit

On the Hyperdeck studio 12G (but not on the Hyperdeck stdio pro2):
    Format: Quicktime
    Video Codec: Apple ProRes 422(LT)
    Basic Video Settings
    Quality: 100
    1920x1080
    Frame Rate: 59.94
    Field Order: Progressive
    Aspect: Square Pixels (1.0)

    Audio Codec: Uncompressed
    Sample Rate: 48000 Hz
    Channels: Stereo
    Sample Size: 24 bit

Would love for Blackmagic to comments what goes and what not for playback between all Hyperdeck Studios
1 x ATEM Constallation 2ME | 2 x Hyperdeck Mini HD | 1 x Multidock 10G | 1 x Video Hub 40 | 1 x Multiview 16 | 1 x Web Presenter HD | 3 x Ursa Broadcast
Offline
User avatar

Xtreemtec

  • Posts: 5387
  • Joined: Wed Jan 02, 2013 11:48 am
  • Location: The Netherlands

Re: Encoding for playback on Hyperdeck Studio

PostMon Mar 25, 2019 3:00 pm

IsseSwe wrote:Would love for Blackmagic to comments what goes and what not for playback between all Hyperdeck Studios

Would rather have BMD make export settings for hyperdeck available in Resolve!!
Just choose the res and framerate you need. Select the codec and bitrate. And resolve outputs a Valid Legal file that is play-able on the hyperdecks!! Would be so Usefull!! :D Instead of users spending hours and hours to find the right settings to get files playing like they should. :|
Daniel Wittenaar .:: Xtreemtec Media Productions ::. -= www.xtreemtec.nl =-
4K OBV Trailer, ATEM TVS HD, 4M/E Broadcast Studio 4K, Constelation 8K, Hyperdeck Studio 12G, Ursa Broadcast 4K, 4K fiber converters with Sony Control
Offline

IsseSwe

  • Posts: 74
  • Joined: Sat Jul 07, 2018 7:16 am
  • Location: Stockholm Sweden
  • Real Name: Istvan Sandor

Re: Encoding for playback on Hyperdeck Studio

PostMon Mar 25, 2019 6:56 pm

Xtreemtec wrote:Would rather have BMD make export settings for hyperdeck available in Resolve!!
Just choose the res and framerate you need. Select the codec and bitrate. And resolve outputs a Valid Legal file that is play-able on the hyperdecks!! Would be so Usefull!! :D Instead of users spending hours and hours to find the right settings to get files playing like they should. :|


Thats a great idea acctually!
1 x ATEM Constallation 2ME | 2 x Hyperdeck Mini HD | 1 x Multidock 10G | 1 x Video Hub 40 | 1 x Multiview 16 | 1 x Web Presenter HD | 3 x Ursa Broadcast

Return to Getting Started

Who is online

Users browsing this forum: No registered users and 14 guests