- Posts: 4
- Joined: Wed Mar 13, 2013 5:20 am
Yes there are some topics already around.
It looks like you have a good basis but a few questions that spring to mind:
-why the videohub. All your switching will be through the 1M/E. Unless you need to route the signals elsewhere?
-and the ultrastudio pro? (assume for capture and playout from from a Windows machine via USB3?, in which case USB from the 1M/E can connect directly and use Media Express to capture)
-Assume you have fibre from 1 location to the other (or several lots)
-Studio Converter at the same location as 2 of the cameras/master control? Using the camera converters for talkback to all 4 cameras?
-Hyperdeck studio is as back up recording?
-Audio integrated into the cameras and then through the SDI? Mixed in the 1 M/E?
-Assume sending vision from cameras to other sites for the interactivity from an Aux out? and when needed converted to fibre etc? and then onto local screens so that the presenters can see the people in the other studio (Rather than the program? or as well as? Did you need 1 screen for each camera showing the other location?) (Only have 3 aux out on the 1 M/E, 6 on the 2M/E
- Will you ever need all 4 camera views on screen at the same time? If so 1M/E can't do it (only the 2 M/E)
Am sure only touching the basics of this but hope this helps. Happy to write more/clarify