9.5 UPDATE NOT READING CFXPRESS CARDS

hey! how are you? just update my 6k ff to 9.5 for autofocus beta and is not reading my cfxpress cards anymore, downgrade software to 8.3.2 and now is working again just to know that this is an error that occurs on new software update, waiting for the next one! <3

[Kristian Lam]

Make and model of card?

Add my cf express card not reading after the 9.5 update. I have an Angelbird AV Pro SE CF Express B 1TB. The card has been updated with the Angelbird card reader and was working before the update with my BMCC 6k.

Hi,
I’ve run into the same issue and have done quite a bit of testing on my end.

I can now confidently say the problem is not with the CFexpress cards. I’m using Angelbird AV PRO CFexpress Type B 1TB cards, all updated to the latest firmware (AVX2.15). They work flawlessly on one of my two Blackmagic 6K Full Frame cameras running firmware 9.5.

But strangely, on the other camera, which is running the exact same firmware, none of the cards are detected, no matter how I format them (exFAT or Mac OS Extended).

As a test, I downgraded the affected camera back to firmware 8.3.1, and all cards were recognized and working as expected again.

I also tried:
• A full factory reset from the camera menu
• A reset using the Blackmagic Camera Setup software
• Removing the battery and leaving it unplugged for over 10 minutes

Still no luck.

At this point, it really looks like this is a firmware compatibility issue affecting only certain hardware revisions of the camera. I’m in touch with Blackmagic Support now and hoping for a fix in an upcoming update.

Hope this helps clarify the situation. If you’re experiencing the same thing, I’d definitely recommend contacting Blackmagic too — the more of us report it, the more visibility it gets.

I have the same issue. Also using an Angelbird AV PRO CFexpress Type B 1TB card

Same here! AV PRO SE CFexpress B 512 gb

Are you on 9.5 or 9.5.1?

[Kristian Lam]

Juts posted the v9.5.2 update which will fix this issue.

I use AV PRO SE CFexpress B 512 gb and have no prpblem reading the card with firmware 9.5.1 why does it only happen with some cameras and not others? Could they be build differently with different components?

I use AV PRO SE CFexpress B 512 gb and have no prpblem reading the card with firmware 9.5.1 why does it only happen with some cameras and not others? Could they be build differently with different components?

Like pocket4k when they change the screen forniture, may be they change internal chipset of card reader


Inviato dal mio iPhone utilizzando Tapatalk

Impressively quick Update Kristian & Blackmagic Team! I hope they are able to fix the Pyxis Monitor issue next!