Page 1 of 1

6K PRO - LUT Issue

PostPosted: Sat Feb 27, 2021 2:01 pm
by threetwenty
Hello, I'm having issues loading and displaying LUTS on the new 6k pro.

They are 33 cube files and below 1.5mb. I've also tried re-exporting them as LUTs in Davinci Resolve but still no joy.

They load into the camera and I can see them in the LUT list but when I tick them to display nothing happens. I am also unable to delete them from the camera either, I press the bin icon then delete and they are still there. The only way to delete them is to reset the camera to the factory setting.

Ben

Re: 6K PRO - LUT Issue

PostPosted: Wed Mar 03, 2021 6:45 pm
by jezsk8ter
I have the exact same issue! Let me know if you find a solution!

Issue importing luts onto 6K Pro

PostPosted: Sat Mar 20, 2021 1:16 am
by t_ruvo
Hey all,

I just picked up the new 6K Pro to replace my standard 6K, so far a great upgrade; the footage looks great, and there's no dreaded blue tint in the screen that seems to be plaguing some users. The only issue I've run into is trying to import the luts I had on my old camera. Upon importing the luts from my cfast card everything seems to work, but then when I go to set the lut in the menu, the label has a new prefix, settings. For example, a lut on my old 6K would be labelled "Fujifilm Eterna", but when imported to the Pro, the label now reads "settingsFujifilm Eterna". Cosmetic issues aside, when I press to select the lut nothing changes, it just stays set to the previously selected lut. Additionally, when I try to delete the luts I have loaded nothing happens, they just stay loaded on. All the pre-loaded BMD Gen 5 luts work fine, but I'm essentially locked out of my Rec709 and film luts.

Has anyone else experienced this? I'm wondering if I'm missing something as I already deleted the luts off the old camera and sold it. To put the luts on the card, I just copied them from the luts folder by accessing them from the settings in Davinci 17 beta. Is there a more proper way to export the luts for camera use? As far as I can remember this is how I exported them for the old camera.

Thanks all!

Problems importing LUTs onto 6k Pro

PostPosted: Sat Mar 20, 2021 10:13 pm
by bencollinsmedia
Hello, I've recently purchased a 6k Pro and am loving it but whenever I try to import LUTs onto the camera I have problems. They get added and appear in the LUTs menu but won't actually let me turn them on, they are just greyed out on the screen. Is there a fix for this or do I need to wait for a firmware update?

Also, I know the LUTs are correct and working as they work fine on the standard 6k.

Re: 6K PRO - LUT Issue

PostPosted: Sat Apr 10, 2021 7:45 am
by noemichaud
Hello,

Same problem !

Re: 6K PRO - LUT Issue

PostPosted: Sun Apr 18, 2021 4:03 pm
by ktt1964
Same here. I can load them in but can't select them. Any word from BMD on this specifically? I know they've acknowledged the blue screen tint but haven't seen official word on this seemingly common LUT issue.

Re: 6K PRO - LUT Issue

PostPosted: Wed Apr 21, 2021 4:13 am
by Shepardtones
Got a Pocket 6k Pro today. Same exact LUT issue as described above. Tried a few different work arounds. Nothing works. Screen color also looks really cold, not sure if white balance is funky right now or something.

Re: 6K PRO - LUT Issue

PostPosted: Thu Apr 22, 2021 2:21 pm
by JimmyBeveridge
I am also unable to load LUTs into the 6k Pro camera. Please fix this BM.

Re: 6K PRO - LUT Issue

PostPosted: Thu Apr 22, 2021 2:40 pm
by Donnell Henry
This will be addressed in the upcoming 7.3 camera update

Re: 6K PRO - LUT Issue

PostPosted: Sun May 02, 2021 7:30 pm
by Scott Stacy
Same issue. The 1MB LUT loads but unable to turn it on when selected and unable to delete. Having the same naming issue "settings" before the name of the LUT as noted above.

Re: 6K PRO - LUT Issue

PostPosted: Sun May 02, 2021 11:25 pm
by Kristian Lam
Hi Scott,

You will need to update to v7.3*

*edited

Re: 6K PRO - LUT Issue

PostPosted: Mon May 03, 2021 4:23 am
by Donnell Henry
Kristian I don’t see 7.3.1 on the support page

Re: 6K PRO - LUT Issue

PostPosted: Mon May 03, 2021 4:40 am
by Kristian Lam
Donnell Henry wrote:Kristian I don’t see 7.3.1 on the support page


AH sorry, what I mean was 7.3. Will edit post above.

Re: 6K PRO - LUT Issue

PostPosted: Mon May 03, 2021 6:33 am
by WahWay
Ah, so there is a 7.3.1 let slip. What could it address? Lens issue? ;)