BMPCC6KPRO HDMI out not working?

Hi all! After years of not owning a Blackmagic camera I'm back. Had many a few years ago.

I just bought the P6Kpro and have connected it through different HDMI cables to different computer monitors, and can't get a signal. Am I missing something? This camera doesn't even have an output option on the Monitor settings, so I can't be "accidentally sending out 4K to unsupported monitors" as it could happen with other cameras, this one is Full HD only. What am I missing?

the HDMI out is 1080p and the framerate is the project framerate
so if you have set the camera to 24 frames, the monitor must support 1080p24

25fps = 1080p25
30fps = 1080p30
....

Good one! I went back and just in case tried all frame rates... none worked. Thanks though

It should work with a TV at least.
I've found that some computer monitors are expecting interlaced signals only when they detect YPbPr/YUV HDMI signals looking like from a video source.

As Robert says. try a TV or camera monitor to confirm HDMI out put.
Computer monitors often do not work for so many reasons.

Tried several monitors including a professional one, no dice. Going back to the store tomorrow.

The store tested my unit and couldn't get the HDMI to work, gave me a new one which works just a lemon

The store tested my unit and couldn't get the HDMI to work, gave me a new one which works just a lemon

Or....

Be careful, you may have “blown” the HDMI. It’s a common issue with some combinations of how you power the camera, especially when using multiple accessories powered from the same battery.

viewtopic.php?f=2&t=108135

viewtopic.php?f=2&t=124053&p=679828

JB

all the matter depends from the type of the monitor... some support frame rates till 50 fps, some others not. For example my Sony Bravia (10 years old television) keep up the signal from my Blackmagic Pro only if I set the camera to 24 FPS... too strange?

Thanks to all that have given the right advice. Refresh frequency of the monitor is double the frame rate... this is the right answer. Thanks again