Blackmagic Forum

Posted: **Fri May 07, 2021 9:43 am**

Hello,

I've been dropping frames after the 7.3 update on my 6K (non-pro). Using my same Samsung external SSD at the same resolution and frame rates as I usually do (BRAW 8:1). Also, sometimes it doesn't recognize the SSD if I don't replug.

6K at 23.98/50fps was the culprit.

I'm going to try test a new SSD and USB cable, but want to know if anyone was experiencing this?

Posted: **Mon Jul 05, 2021 3:32 pm**

I had the same problem last night with 7.3.1 on BMPCC6K, it wasn't an issue on the 6K Pro

Posted: **Tue Jul 06, 2021 10:06 pm**

If you think is a firmware problem do a controller test,’shoot something then downgrade and see if it happens again.
I use from day one 7.3 firmware on my pk6 classic and I not observe this kind of problem, I had many ssd and many cable. Check very well it ssd and especially the cable,’usb -c is a very bad connector.

Inviato dal mio iPhone utilizzando Tapatalk

Blackmagic Forum

7.3 dropping frames?

7.3 dropping frames?

Re: 7.3 dropping frames?

Re: 7.3 dropping frames?