SDI record flag HyperDeck Video Assist SONY ARRI RED

The place for questions about shooting with Blackmagic Cameras.
  • Author
  • Message
Offline
User avatar

Vadim Schulz

  • Posts: 21
  • Joined: Tue Aug 05, 2014 7:55 pm

SDI record flag HyperDeck Video Assist SONY ARRI RED

PostFri Sep 17, 2021 6:52 am

Hello all,

can anyone confirm that any of these devices can handle the Sony, Arri or Red record flags (which could be HANC?):
Video Assist 7“ 12G HDR
Video Assist 5” 12G HDR
HyperDeck Studio HD Mini
HyperDeck Studio HD Plus
HyperDeck Studio HD Pro
HyperDeck Studio 4K Pro

I know from my own experience that the Video Assist 4K from 2019 detects the Sony Venice flag (although not always). And back then the BMD support said that this was the only BMD device that can record automatically with Sony Venice. The older HyperDecks weren't able to.

So what about the current recorders?
Can they automatically record from Arri and Sony cameras using the SDI start / stop record flag?
I also asked the BMD support but didn’t receive an answer.
I‘m looking for devices that can be bought these days (no older models like a Pix or so) and of course it could be any manufacturer. I know the Atomos can do it but it would be great if there were something else. And it just would be great if the BMD devices could do that.

I mean, is there anyone in the world who has tested this before or who can actually test it?

Thanks guys!
Last edited by Vadim Schulz on Mon Sep 20, 2021 8:25 am, edited 1 time in total.
Vadim Schulz, SOC BVK
Offline
User avatar

Vadim Schulz

  • Posts: 21
  • Joined: Tue Aug 05, 2014 7:55 pm

Re: SDI record flag HyperDeck Video Assist SONY ARRI RED

PostMon Sep 20, 2021 8:23 am

Dear Blackmagic support,

That's not a difficult question. And definitely someone has the opportunity to just try it out if no one knows it!

It is such an important piece of information:
Do the current HyperDeck Studio models (and the Video Assist HDR) also support the SDI start / stop function for cameras from Arri or Sony or RED?

Thank you very much!
Vadim Schulz, SOC BVK
Offline

Andrew Kolakowski

  • Posts: 9209
  • Joined: Tue Sep 11, 2012 10:20 am
  • Location: Poland

Re: SDI record flag HyperDeck Video Assist SONY ARRI RED

PostMon Sep 20, 2021 4:28 pm

Send this question to BM support directly, not here.
BM doesn't answer questions here (only some).
Offline
User avatar

Vadim Schulz

  • Posts: 21
  • Joined: Tue Aug 05, 2014 7:55 pm

Re: SDI record flag HyperDeck Video Assist SONY ARRI RED

PostMon Sep 20, 2021 5:30 pm

Thanks Andrew! I did that first of course. But they didn't answer.
Vadim Schulz, SOC BVK
Offline

Andrew Kolakowski

  • Posts: 9209
  • Joined: Tue Sep 11, 2012 10:20 am
  • Location: Poland

Re: SDI record flag HyperDeck Video Assist SONY ARRI RED

PostMon Sep 20, 2021 5:38 pm

I think this is your answer then :D
Offline

John Brawley

  • Posts: 4267
  • Joined: Tue Aug 21, 2012 7:57 am
  • Location: Los Angeles California

Re: SDI record flag HyperDeck Video Assist SONY ARRI RED

PostMon Sep 20, 2021 9:17 pm

I know that the HDR video assist recorders both work with Arri cameras in slave mode.

A lot of wireless transmitters though DO NOT pass the record flag.

JB
John Brawley ACS
Cinematographer
Currently - Los Angeles
Offline
User avatar

Vadim Schulz

  • Posts: 21
  • Joined: Tue Aug 05, 2014 7:55 pm

Re: SDI record flag HyperDeck Video Assist SONY ARRI RED

PostTue Sep 21, 2021 7:42 am

Thank you John!
Good to hear that. I mainly work with Teradek Bolt transmitters 500XT and newer. And they pass the flag. I'm not sure about their older line-up.

Anyone knows which transmitters do not pass it?

So it seems that all the Video Assists supports the HANC record flag function with Sony and Arri protocols (it's maybe the same). But the older HyperDecks not! Does anyone have a current HyperDeck Studio (any of them) and could test that?
Vadim Schulz, SOC BVK

Return to Cinematography

Who is online

Users browsing this forum: Bing [Bot], SteveDGreen and 87 guests