Blackmagic Forum

Because people are getting a lot of headaches with using the Ronin RS2 with the Pocket 4K.

Keep in mind, I will be using a follow focus with it also.

I've got a Moza with follow focus that's working OK. I'm not the heaviest user of gimbals but it's worked for my needs.

I use both follow focus and power the camera from the gimbal.

Sent from my SM-S908U using Tapatalk

rNeil H wrote:I've got a Moza with follow focus that's working OK. I'm not the heaviest user of gimbals but it's worked for my needs.

I use both follow focus and power the camera from the gimbal.

Sent from my SM-S908U using Tapatalk

Which one?

I’m working two years with the BMPCC4k with Sigma ART 18-35 and the Moza Air2. Power controlled through the Moza and an iFocus-M for focus control.

BennoZ wrote:I’m working two years with the BMPCC4k with Sigma ART 18-35 and the Moza Air2. Power controlled through the Moza and an iFocus-M for focus control.

Thank you.

Keep in mind if you don’t want to use an offset plate, like me, you have to put ‘something’ between camera and baseplate so the camera is a few millimeters higher. You also have to turn the baseplate of the Moza 180 degrees so you can slide in the camera from behind. Otherwise it doesn’t fit.

alternative is weebill 2 and turn the camera upside down. No counterweights needed, only flip in post. Works pretty good and light weight.

I am using Crane 3S Pro and it works perfectly, also works great with my UMP but heavy.
Many I know use Crane 2s witch is also a good choice for pockets, much lighter setup.
Also many I know use DJI RS 2 that is also a great choice for Pockets.