- Posts: 2
- Joined: Thu Mar 14, 2024 9:28 am
- Location: Northern Germany
- Real Name: Daniel Sypke
Hello Daniel , you are going to find that Information in the April 2023 " Installation and Operating Manual " of the Pocket Cameras ..
You go to Page 34 , you'll find a chapter " Custom Solutions " , in which you have all the Information ..
That being said , in my humble Opinion , it is always better not to put too much Voltage on the Input . Of course there is at least one Main Regulator inside .. but the Dissipated Power of a Regulator is : Input Voltage minus Output Voltage , multiplied by the Current ..
More dissipated power means more Stress , and more Heat on the Regulator , not good for safety and also for the Sensor .. less heat , less noise ..
Care must be taken not to do a Polarity Inversion .. a good thing is to use a Low Drop Diode , able to handle the Current ..
Good Luck , Good Filming / Regards / Mike ..