Blackmagic Forum

Posted: **Thu Jun 13, 2024 8:00 am**

URSA Mini.

Didn't use the camera for 6 months, kept in proper storage. I turn it on and this is on the screen, and gets recorded this way. When I press the Peak button, it switches between pink and green.

Changed literally every setting I could think of.
Swapped out every physical component
Did Factory reset
Did Firmware Update.

Someone please tell me there is a quick fix I've overlooked it.

Posted: **Thu Jun 13, 2024 9:43 am**

The fact that peaking is reacting to it tells you that it is likely on the sensor, which is bad news.

Posted: **Fri Jun 14, 2024 1:27 am**

for anyone who has the same issue...

I opened up the side panel- 6 six screws, and the main board had one connection that was slightly loose.

I pushed it back in and solved the problem.

Posted: **Fri Jun 14, 2024 5:38 am**

Thanks for the update!
This might help others in the future.

Posted: **Tue Jun 25, 2024 2:58 pm**

alt84-video wrote:for anyone who has the same issue...

I opened up the side panel- 6 six screws, and the main board had one connection that was slightly loose.

I pushed it back in and solved the problem.

Can I ask you to build a small tut to put on ifixit website?
It’s very useful and I think us important to keep it :-)

Inviato dal mio iPhone utilizzando Tapatalk

Blackmagic Forum

Pink and green noise on screen. (solved)

Pink and green noise on screen. (solved)

Re: Pink and green noise on screen.

Re: Pink and green noise on screen.

Re: Pink and green noise on screen. (solved)

Re: Pink and green noise on screen. (solved)