Pocket Cinema Camera 4k 2-pin power plug

So now that the camera is "available", I got info from support on the 2-pin power connector that is on the camera. The connector seems to be a rarer one, since it is a smaller size 6, at least in Europe according to my web searching abilities. Larger connector sizes 12+ seem to have resellers.

Weipu SF610/s2 (1 pin = +ve(voltage)) female plug, male plug on the camera is most likely the SF612/p2.

I have not found any "free shipping" suppliers, not so keen on courier fees from china on few 3€ plugs +VAT since then the sum would go over the threshold on imports that my country taxes vat on.

Weipu SF1210/S2 US $16.65 Free Shipping
ebay. com/itm/Original-WEIPU-SF12-2Pin-waterproof-Panel-Mount-Circular-connector-plug-socket/263550301410

It seems the same as a Wooden Camera connector.

https://www.videodata.de/shop/products/ ... -Pack.html

Feels like this is going to be an essential accessory, especially given the reasonable price from BMD.

https://www.videodata.de/shop/products/de/Nonlinear-Video/Hardware/I-O-Karten/Blackmagic-Pocket-Camera-DC-Cable-Pack.html

Feels like this is going to be an essential accessory, especially given the reasonable price from BMD.

Yeah, this and the mini-XLR to XLR adapter.

Size 6? Size 12? C’mon BMD start putting these little details in the specs (gads I hope it’s not already detailed in the manual I haven’t read every word there)! All we know for sure is John Brawley told us it was not a standard Lemo 2-pin power connector. I’m ordering both the cables from BMD but still good to know what it is.


Sent from my iPhone using Tapatalk

Hi!
can anybody verify the extact power plug? I dont have my pocket4k yet (pre-ordered!), but I want to be prepared...

any links on where to order those plugs? I want to connect it to some LiPo packs with 3S + 4S (14.4V and 16.8V) that I have lying around in masses from my RC hobby.

thx
Mike

Michael, the first post in this thread from Cooper has the complete and accurate information.


Sent from my iPhone using Tapatalk

Hi Rick,
maybe Weipu SF610/s2 is correct, but I still couldnt find anything online where to order... especially someone who sends to europe, regardless of shipping costs. so are there any URLs / shops, you know of?
the 2 pin version, available for "private" customers, not companies buying 1000 pieces

In the worst case, I will cut off the original power supply and add some in-between plug (eg. XT60)
maybe not the best idea for warranty

thx
Mike

I hope someone starts selling smaller cables, because that Wooden one is stupid overpriced. I’d get the BM one but I don’t know how to solder cables.

Chris, the Wooden Camera cable, is a custom cable made to length from quality materials. I have one of their Mini XLR to regular XLR power cables, very well made. These are not mass produced Asian sweatshop made cables. It takes a good tech about 15min to make up a cable, if a bench is already setup for making them, with all the bits at hand. Figure shop time at $120 hr, plus the cost of the parts, and $60-75 is reasonable. I used to charge this much plus cost of the connectors 10 years ago when I made up custom audio cables. You get what you pay for.
Cheers

Michael, look at post #45 in this thread. Review the entire thread for other leads, but the connector is hard to come by it seems. Conjecture is BMD bought out their current supply!

BMPCC 4K power conector socket type
https://r.tapatalk.com/shareLink?share_ ... are_type=t



Sent from my iPhone using Tapatalk

While I love BM cameras, I am driven mad that they make them in shapes that do not work easily with the Movi gimbal. The Ursa Mini Pro is too long and the BMPCC 4k is too wide. So now I am trying to find a right angle 2-pin power cable for this thing and feel like that's gonna be a fat chance. Same with the mini XLR. The camera's balance point put all the ports right in line with the frame rods of the movie and there's like half an inch of clearance. Sigh...

Tilta’s half and full cage for BMPCC4K has the right-angle accessories I believe you are wanting. There’s a link to it in the forum.
TILTA BMCC4K Cage
https://r.tapatalk.com/shareLink?share_ ... are_type=t

Sent from my iPhone using Tapatalk

They have right angle usb and such but no right angle power. However, I suppose I could just get a dummy battery instead of trying to find a right angle 2-pin.

While I love BM cameras, I am driven mad that they make them in shapes that do not work easily with the Movi gimbal. The Ursa Mini Pro is too long and the BMPCC 4k is too wide. So now I am trying to find a right angle 2-pin power cable for this thing and feel like that's gonna be a fat chance. Same with the mini XLR. The camera's balance point put all the ports right in line with the frame rods of the movie and there's like half an inch of clearance. Sigh...

Brady, my mistake going from memory. They have two 2-pin cables but neither is L shaped. I thought they had thought of everything, but I was wrong. You know if you contact Tilta they may agree they should include an L-shaped 2-pin connector. I suspect the difficulty is that it’s a locking connector that takes some pushing and pulling to tock and unlock. That action may be problematic for a L-shaped design. Wouldn’t hurt to ask them. The OEM may even agree and make one!


Sent from my iPhone using Tapatalk

Maybe in the future it would be handy, but I need something quick! I will probably go the dummy battery route for now although I just noticed that the damn battery door doesn't come off easily (or at all without breaking it). Blackmagic strikes again!

Brady, my mistake going from memory. They have two 2-pin canoes but neither is L shaped. I thought they had thought of everything, but I was wrong. You know if you contact Tilta they may agree they should include an L-shaped 2-pin connector. I suspect the difficulty is that it’s a locking connector that takes some pushing and pulling to tock and unlock. That action may be problematic for a L-shaped design. Wouldn’t hurt to ask them. The OEM may even agree and make one!


Sent from my iPhone using Tapatalk

Hi Rick,
maybe Weipu SF610/s2 is correct, but I still couldnt find anything online where to order... especially someone who sends to europe, regardless of shipping costs. so are there any URLs / shops, you know of?
the 2 pin version, available for "private" customers, not companies buying 1000 pieces

In the worst case, I will cut off the original power supply and add some in-between plug (eg. XT60)
maybe not the best idea for warranty

thx
Mike

Michael, you can email Conrad.de support, as they do have the bigger Weipu connectors in stock, if they can order the smaller SF6 series for you.
I've already emailed Conrad.at about that and got a ticket number and a reply where they ask how many I'd interested in, but since then I've been stuck in support limbo with no answers anymore.

Hi Rick,
maybe Weipu SF610/s2 is correct, but I still couldnt find anything online where to order... especially someone who sends to europe, regardless of shipping costs. so are there any URLs / shops, you know of?
the 2 pin version, available for "private" customers, not companies buying 1000 pieces

In the worst case, I will cut off the original power supply and add some in-between plug (eg. XT60)
maybe not the best idea for warranty

thx
Mike

Michael, you can email Conrad.de support, as they do have the bigger Weipu connectors in stock, if they can order the smaller SF6 series for you.
I've already emailed Conrad.at about that and got a ticket number and a reply where they ask how many I'd interested in, but since then I've been stuck in support limbo with no answers anymore.

I could drive over to a Conrad store with the camera+power supply in hand.
Do you think that would help in finding the correct part number?

Note: I recommend to somehow mark the top-side of that connector. Getting it in in the correct orientation with a cage in dim light is nearly inpossible.

I could drive over to a Conrad store with the camera+power supply in hand.
Do you think that would help in finding the correct part number?

Well, that might speed things up. The questions is if they can special order that part or not. I guess it will be possible, as they have Weipu parts in their online store, just not the parts we are looking for.

I could drive over to a Conrad store with the camera+power supply in hand.
Do you think that would help in finding the correct part number?

Well, that might speed things up. The questions is if they can special order that part or not. I guess it will be possible, as they have Weipu parts in their online store, just not the parts we are looking for.

The only answer was "we don't have it".
The clerk wouldn't let me explain a single word.

I tried the service desk and he just directs you to the same guy. "sorry, can't help you".

Guys! Try to order connector from alibaba. I am almost paid for order, but local supplier contacted me and offered to order connectors.
So for now there is two ways. Alibaba or through local supplier. As for local supplier you should ask every company that is official distributor. Half of them will say that its not available.

AND also you can order connectors directly from manufacturer. But they shipping orders by DHL or UPS. Thats bit on expensive side for few connector, but ok if you will order dozen of them.
Price is about 2,67$ and depends of quantity. For 50pcs they promising good discount.

Guys! Try to order connector from alibaba.

As a consumer with <100 parts, I'd use Aliexpress.

Is "Weipu SF610/s2" definately the correct size?
I don't want to order the wrong one, only to find out after 2-6 weeks random delivery time.

https://de.aliexpress.com/item/Original ... Title=true

Guys! Try to order connector from alibaba.

As a consumer with <100 parts, I'd use Aliexpress.

Is "Weipu SF610/s2" definately the correct size?
I don't want to order the wrong one, only to find out after 2-6 weeks random delivery time.

https://de.aliexpress.com/item/Original ... Title=true

Alibaba work with retail to. Supplier confirmed me a pack of 5pcs connectors, with no problem. Just look for those ho sale low quantity 1-100pcs. I have found 4 of them and 3 reply to my (one of them was manufacturer ).

Aliexpress suppliers didnt have SF610/s2 yet. Only S6 series connectors they have is corresponding piece (male type).

I can not give any guaranty that SF610/s2 if 100% correct, but i have ordered them. Few suppliers and manufacturer confirmed this model as connector that BlackMagic is buying. Was they right or wrong i will se in few weeks when my connectors will arrive.

We have been told that /S2 designates the female connector and I think it was /P2 I saw that was the male connector that the camera used.


Sent from my iPhone using Tapatalk

We have been told that /S2 designates the female connector and I think it was /P2 I saw that was the male connector that the camera used.


Sent from my iPhone using Tapatalk

As i understood
P - stands for POST/PIN
s - stands for SOCKET
Camera have female connector with 2 pin contacts.
So we need connector with two sockets. So this should be /S2

weipu.JPG (74.67 KiB) Viewed 10632 times

Lesha, you may have a typo. The Camera has the male 2-pin post, not the female. So as you state the cable needs the female 2-pin socket.


Sent from my iPhone using Tapatalk

Correct Rick. With Audio cables, the “Male”sends the signal to the “Female”, but with power cables, it is the other way round, to prevent shorting out the male pins, if they are “hot”, so the camera has the male, and the cable providing the power is a female connector. Same hold true for power 4-pin XLR connectors.
Cheers

Sounds just like real life around my home. I may do the talking but someone else has the power.


Sent from my iPhone using Tapatalk

Rick, you ”crack” me up!
Cheers

I could drive over to a Conrad store with the camera+power supply in hand.
Do you think that would help in finding the correct part number?

Well, that might speed things up. The questions is if they can special order that part or not. I guess it will be possible, as they have Weipu parts in their online store, just not the parts we are looking for.

The only answer was "we don't have it".
The clerk wouldn't let me explain a single word.

I tried the service desk and he just directs you to the same guy. "sorry, can't help you".

Marcus, I finally got an answer from Conrad.at. They offered me 10 pieces for 6 Euros per pc. netto. They estimated a delivery time of 7 weeks

Contact is business@conrad.at

Marcus, I finally got an answer from Conrad.at. They offered me 10 pieces for 6 Euros per pc. netto. They estimated a delivery time of 7 weeks

Contact is business@conrad.at

Price sounds great but 7 weeks means January.

Hi Robert!
why not order 25 pieces and sell it internally all over Austria?!

then maybe the price goes even down...

I would take 2 or even 3....

greets
Mike

Hi Robert!
why not order 25 pieces and sell it internally all over Austria?!

then maybe the price goes even down...

I would take 2 or even 3....

greets
Mike

I was thinking about, yes. I thought it might be even better to let a professional pre-wire the plugs and then sell it, because that would be the most useful for people interested into getting that plugs.

I was thinking about, yes. I thought it might be even better to let a professional pre-wire the plugs and then sell it, because that would be the most useful for people interested into getting that plugs.

Like... buying the 50eur cable pack from Blackmagic that isn't available?

I've ordered 10 connectors directly from Weipu who sell through alibaba.com.

They've just finished being manufactured and should be shipped out next week.

Guess Core heard my prayers.

https://www.bhphotovideo.com/c/product/ ... /accessory

So I bit the bullet and bought the official Blackmagic Pocket Camera DC Cable Pack (65cm), a bit pricy to my liking with VAT and import tax rising the price. The cables arrived today from online store that ships to Scandinavia(+ Finland).

The locking connector is the Weipu sf6 series female plug, and no brand male d-tap and female 5,5/2,5 mm barrel connector, and the cable is AWM 1185 20awg.

please check my topic about power and D-tap question!
viewtopic.php?f=2&t=82281

Here's what the connector looks like. It splits into three parts.

SF610-S2

Weipu SF610-S2 Connector 1.jpg (235.43 KiB) Viewed 9781 times

SF610-S2

Weipu SF610-S2 Connector 2.jpg (416.11 KiB) Viewed 9781 times

Made up these cables last week.

Cables with SF610-S2

BMP4K power cables.jpg (373.42 KiB) Viewed 9781 times

Here's another cable wired up to a Juicebox.

BMP4K with cable, juicebox and loupe

BMP4K Loupe + RedRockRig 1 sm.jpg (860.58 KiB) Viewed 9802 times

Here's what the connector looks like. It splits into three parts.

Weipu SF610-S2 Connector 1.jpg

Weipu SF610-S2 Connector 2.jpg

Made up these cables last week.

BMP4K power cables.jpg

Hi. Got the connectors from Cina. Just needed to know from you that made the cables... ... 1 carries positive (the central pin of a standard DC connector) and 2 negative (the outside "circle" of a standard DC connector) or the other way round ? Thanks

Here's another cable wired up to a Juicebox.

BMP4K Loupe + RedRockRig 1 sm.jpg

Which loupe is that ? ?!??! Seems great

They've made it real easy to get the right connector for the cam.

https://www.ebay.com/itm/Weipu-SF6-2Pin ... SwezRcBk5T

Here's another cable wired up to a Juicebox.

BMP4K Loupe + RedRockRig 1 sm.jpg

Which loupe is that ? ?!??! Seems great

That's the Hoodman Loupe 3.0".

Can anybody tell me what pin should be soldered to positive wire and what to negative ?

Can anybody tell me what pin should be soldered to positive wire and what to negative ?

1 = positive
2 = negative

Can anybody tell me what pin should be soldered to positive wire and what to negative ?

1 = positive
2 = negative

Thank you!)


Отправлено с моего iPhone используя Tapatalk

I bought the Core SWX D-Tap Cable for the Pocket 4K. For anyone else who got it, is this normal? I can't tell if something broke off, or if they're ok with the insides being exposed like this...

Core Cable.jpg (279.39 KiB) Viewed 4724 times

EDIT: Noticed the charger cable has the same opening. Guess I never noticed since I never used that connector to power a camera. Still makes me worry about it. Like what would happen if someone was drinking coffee, and a drop fell into it when the camera was being powered.