Thu May 30, 2013 10:45 am
SDI Overlays will not turn on
anyone else had this problem?
anyone else had this problem?
SDI Overlays will not turn on
6 posts
• Page 1 of 1
Thu May 30, 2013 2:20 pm
What is the procedure you are using? What is the device you've connected?
- Posts: 76
- Joined: Sun Oct 14, 2012 2:52 pm
Thu May 30, 2013 3:34 pm
I have a simular problem. I have an SDI to HDMI converter. I plugged it in and the SDI lock light is on. All I get in the monitor are interference lines. It says it supports 1080P @ 60Hz plus all the others. I clicked on SDI overlays, (All, status & guides) and just can't get a picture. Any thoughts on this?
eric
eric
Thu May 30, 2013 3:51 pm
What converter?
Have you tried plugging the BMCC directly into an SDI monitor? Other people have reported issues with some converters...
Have you tried plugging the BMCC directly into an SDI monitor? Other people have reported issues with some converters...
Thu May 30, 2013 4:33 pm
John Bartman wrote:SDI Overlays will not turn on
anyone else had this problem?
It might be worth a try to switch firmware between the latest v1.3.1 and v1.2.1 (both available on the BMD support site) to see if that makes a difference. You can install/reinstall firmware versions at anytime.
Let us know what you find out.
-
Thu May 30, 2013 4:41 pm
Yes, thanks I tried re-installing the latest version and seems to have worked.
6 posts
• Page 1 of 1
Who is online
Users browsing this forum: carpentermike and 92 guests