Inspector Issue with 17.4

When you toggle the inspector while using the resolve interface over 2 monitors the inspector tab is truncated to a small window and the only way to get it back to normal is to toggle the meters tab.
Anyone else had this issue?
Seems fine using 1 monitor only.
Cheers

[Shrinivas Ramani]

Thanks for the report Paul

Can you add the following to your report:
a. screenshots to compare how it behaves.
b. a description of the displays - laptop vs external monitor, their resolutions and scaling factors, whether they are connected to the discrete GPU
c. Information describing your system setup and Resolve versioning. The FAQs are a good starting point for this info.

Regards
Shrinivas

My system details are upto date in my signature.

Screen 1 - Display port - 1920x1080
Screen 2 - HDMI - 1920x1080

Screen Shot 1 - inspector off.png (402.06 KiB) Viewed 565 times

Screen Shot 2 - inspector selected.png (430.24 KiB) Viewed 565 times

Screen Shot 3 - closer shot of truncated inspector.png (32.57 KiB) Viewed 565 times

After Meters tab has been selected

Screen Shot 4 - inspector normal once Meters tab has been selected.png (91.36 KiB) Viewed 565 times

[Shrinivas Ramani]

Thank you.

One last request, just in case there is something we've overlooked - can you include a link to your diagnostic logs please?

Regards
Shrinivas

attached

DaVinci-Resolve-logs-20211025-193729.zip

(895.83 KiB) Downloaded 21 times

[Shrinivas Ramani]

Thanks for your report. It has been passed on to engineering.

Can you try toggling the full-height button (to the right of the inspector) twice? This should reset the state of the inspector to full height and allow you to continue working.

Regards
Shrinivas

One click on the meters tab fixes it quicker...

First click to the full height toggle expands the timeline over the inspector...
Second click to the full height toggle returns the inspector to normal.


Have also tried this on my home system with 2 different monitors on an M1 Mac mini

Cheers