Tue Feb 01, 2022 12:12 am
Hi Dwaine, thanks for responding. Yes, the IP address matches.
Everything works fine with the USB connection and everything used to work fine with my ethernet connection. This is what I have tried so far.:
1. USB cable out, ethernet cable in. Cat 6 direct into my 16 port router
2. DHCP off. I turned it on for USB
3. Davinci Resolve Mini Panel (Ethernet), selected Control Panel page of Preferences
4. IP Address-DaVinci Resolve Mini Panel, selected from the pull-down list.
5. When that didn't work, I typed in the IP Address under Configure Manually
Of course, I have no way of figuring the appropriate Subnet Mask or Router Gateway if that is necessary to the process.
My original setup--the one I used with my Artist Color Control and subsequently used with the Mini Panel--involved connecting to the second ethernet p[ort on my computer using a separate router and I believe crossover cables. This doesn't seem to work either anymore but if plugging directly into the main router with CAT 6 cable is not the preferred approach, I can go back and troubleshoot this setup some more.
Any ideas are welcome. I am surprised that I cannot find instructions anywhere to set up the panel properly.