
- Posts: 134
- Joined: Mon Dec 17, 2018 9:08 pm
- Real Name: Marc Schreiber
Hello All
I was helping my wife film the "birth" of a Monarch butterfly and I setup my BMPCC4k to shoot at 4k 75fps/23.976 (BRAW Q5) and I am stumped by what to set my project at.
My initial try was a Project of 4096 × 2160 and a TL of 24. It came in letter boxed (correct)
THANK YOU
Marc
MediaInfo:
Video
ID : 1
Format : brvm
Codec ID : brvm
Duration : 1 h 32 min
Bit rate mode : Variable
Bit rate : 112 Mb/s
Width : 4 128 pixels
Height : 1 736 pixels
Display aspect ratio : 2.000
Frame rate mode : Constant
Frame rate : 23.976 (24000/1001) FPS
Bits/(Pixel*Frame) : 0.651
Stream size : 72.0 GiB (99%)
I was helping my wife film the "birth" of a Monarch butterfly and I setup my BMPCC4k to shoot at 4k 75fps/23.976 (BRAW Q5) and I am stumped by what to set my project at.
My initial try was a Project of 4096 × 2160 and a TL of 24. It came in letter boxed (correct)
- Do I need to tell DR in the file properties it is a 75fps file? so it is converted to 23.976?
- OR is that conversion automatic?
- Is it really 1.5 hours or 1.5 hours slowed down from 75 to 23.976? (If I had a TL of 75 would it really be 30min?)
- MediaInfo (below) shows it to be 1.5hrs at 23.976...
THANK YOU
Marc
MediaInfo:
Video
ID : 1
Format : brvm
Codec ID : brvm
Duration : 1 h 32 min
Bit rate mode : Variable
Bit rate : 112 Mb/s
Width : 4 128 pixels
Height : 1 736 pixels
Display aspect ratio : 2.000
Frame rate mode : Constant
Frame rate : 23.976 (24000/1001) FPS
Bits/(Pixel*Frame) : 0.651
Stream size : 72.0 GiB (99%)
Thank you!
Marc
System: (I Built) Intel I7-6700k 4/oc4.2ghz | 32gb DDR4@3000mhz | 1x Nvidia GTX1070 drvr 456.38 | 970Evo M2 C drive |1tb HD |2tb HD |4tb HD | 2x ASUS Monitors | Win10 64bit ver2004 19041.508
Marc
System: (I Built) Intel I7-6700k 4/oc4.2ghz | 32gb DDR4@3000mhz | 1x Nvidia GTX1070 drvr 456.38 | 970Evo M2 C drive |1tb HD |2tb HD |4tb HD | 2x ASUS Monitors | Win10 64bit ver2004 19041.508