sergisanchez wrote:Uli Plank wrote:Please remember that with todays speeds and chip density, a single bad hit from radioactivity (natural or man-made) can cause a hiccup.
Structures with a few nanometers are a more than hundred times smaller than the wavelength of visible light…
OTOH, if you can reproduce it on that single frame, it might be defective from the start.
I was wondering, because it started happening this month, and in affected several exports, every time with 1 or 2 frames corrupted. On different projects, but always when encoding for the DCDM (JpeG2000)
1) how hot is your system when rendering?
2) open all the cases, get a good air compressing system and below all the dust out
3) re-set the cards and ram
4) do some stress test for the RAM/GPU/CPU and disks.
Bonus
As it is starting to happen to me at home, the CPU is not cooling enough due to aging of the thermal paste and water cooling system.
CPU was reaching 100 C in rendering….
So i ordered a Thermal Paste kit and a new Water cooling system (I cannot replenish the fluid in the cheap old one)