Try this post which I copied, let me know if that works-- I have one I never use and will probably move it:
These are the steps I went through to get a Behringer BFC2000 to work with Resolve
17.
Start up the BFC2000 unit into either HUI or Mackie Control. This requires you to
power on the unit while holding one of 2 buttons depending on the mode you
choose. See here
https://www.sweetwater.com/sweetcare/ar ... t-are-the-emulation-modes-on-my-behringer-b-control-bcf2000/# for a diagram.
In Resolve go to Preferences->Control Panels. Under Audio Console, check the box
that says "Use MIDI audio console"
Select Either HUI or MCU depending on first step.
For Midi Input select the BFC2000
For output also select the BFC2000. This is important if you want the faders to move.
I like the configuration of the HUI mode more then the MCU mode. The only major
difference between the two is what the two rows of buttons below the knobs do.
In HUI mode the buttons mute and solo
In MCU mode the buttons mute and select the track
The 4 buttons in the bottom right corner will rewind, stop, forward and play. The
knobs will adjust the pan. The faders will adjust the fade. Pressing the knobs has no
effect. The presets, encoder groups, and other buttons seem to do nothing.