The movie export stops

Computer with AMD Ryzen 7 3800X 8-Core Processor 3.90 GHz, GF RTX 3060 card. So far, there has been no problem with exporting files from the GoPro 11 camera to 4K. Now the export stops every now and then for 5-10 minutes and then starts. And so several times during export. What could be the problem?

Local, Network or Cloud Library?

Local SSD 1 GB

The problem is a driver conflict for the RTX 3060 graphics card. The rendering on the GPU is correct. I have tried different graphics card drivers. Nothing helps

Here are some tests you can run. Might help to pin things down.

Export using the CPU (Native).

Export to DNx file.

Bypass Color and Fusion before export.

Report back.

1. Export using the CPU (Native).- The render stops at 2%. He waits for about 10 minutes and sets off. Then it stops at 15% and waits again...
2. Export to DNx file.- Format MXF OP1A, Codec-DNxHR, Type DNxHR HQX 12 bit 4K The render stopped at 18% and is still there
3. Renders raw files straight from GoPro 11

OK.

How much VRAM do you have in the GPU?

What's your full storage arrangement?

Exporting Single file or Individual files? What happens when you try the opposite of what you've been doing?

RTX3060 12GB graphics card
Original files 1 GB SSD drive. Render second 1GB SSD.
Original files 1 GB SSD drive. Render second 1GB SSD
Two weeks ago everything was working fine. The render was super fast

PS
Rendering on the GPU itself works correctly. When I select the RTX3060 graphics card, the render hangs constantly

I assume you mean Terabyte for those drives?

What about the System drive? Are the Media and Export drives stand alone? Neither is also the System drive?

Yes, 1TB SSD render drive. The second 1TB SSD drive, original GoPro 11 files. And the third separate 1TB system drive

Got it.

What about other media? Same problem, or only those GoPro clips?

Have you tried those clips in other projects?

I'm about to record a file from iPhone 8 Plus. And only on Tuesday I can record files from the Nikon Z6

Use these for testing.

https://www.blackmagicdesign.com/products/blackmagicraw

On one file, render works correctly. The problem begins when there are several files that are 20 minutes long

Is the one that works a GoPro clip, or BRAW?

Are you exporting Single file or Individual files? What happens when you try the opposite of what you've been doing?

Have you tried the GoPro clips in other projects?

This is a simple project. No coloring, no transitions, no subtitles on original GoPro 11 MP4 files

No coloring

Your posted image says otherwise. That rainbow icon around the clip number says you've done something to the clip.

Try enabling Bypass, and then export again.

Equalizer, vocal chanel limiter

Reinstalling W11 helped. Everything works correctly

Glad you got it working.

(But as an aside, audio effects won't trigger that rainbow outline. That only turns on when you make changes to a clip on the Color page.)