Page 20 of 20

Re: DAVINCI 16 | Big feature request list.

PostPosted: Thu Apr 04, 2019 8:04 am
by Gabriele Gelfo
DaVinci Resolve 16 will be renamed DaVinci 2019

Re: DAVINCI 16 | Big feature request list.

PostPosted: Thu Apr 04, 2019 12:58 pm
by Frank Engel
I would like to see better support for 3rd part controllers - in particular, the ability to use the "A" button on the Tangent Ripple to toggle one of the trackballs to be the offset wheel, and the ability to map custom MIDI controllers/events to various Resolve features in addition to a "normal" control surface.

The MIDI controller mapping should be able to be set up differently for each area of Resolve so that we can use one control surface across editing, compositing, mixing, and coloring, with the surface adapting to the task at hand (based on how the user configured it).

Re: DAVINCI 16 | Big feature request list.

PostPosted: Thu Apr 04, 2019 10:37 pm
by Paul Carlin
I would like to add another checkbox to the Render Settings:

Disable edit and input sizing
Disable output sizing and blanking
Force sizing to highest quality
Force debayer to highest quality

Re: DAVINCI 16 | Big feature request list.

PostPosted: Thu Apr 04, 2019 11:05 pm
by Tom Early
Paul Carlin wrote:I would like to add another checkbox to the Render Settings:

Disable edit and input sizing
Disable output sizing and blanking
Force sizing to highest quality
Force debayer to highest quality


why?

Re: DAVINCI 16 | Big feature request list.

PostPosted: Fri Apr 05, 2019 1:34 am
by Jack Swart
Christmas is either late or early.
Depends if you are a glass half empty or glass half full person.

DR16.png
DR16.png (447.49 KiB) Viewed 3081 times

Re: DAVINCI 16 | Big feature request list.

PostPosted: Fri Apr 05, 2019 2:07 am
by Philipp Glaninger
Thanks for posting the picture ... I was looking forward for an early sneak peek like this!

"Introducing the next Generation in Editing!"

OK. Hmmmm.... Let´s hope it will contain a lot "Evolution" for the other pages too (Color, Fairlight, Export, etc.) and not just the Editing Page.

Re: DAVINCI 16 | Big feature request list.

PostPosted: Fri Apr 05, 2019 3:47 am
by Oli Koos
Are those movies in the background all done with fusion? Is that a clue that we integration with fusion will be even tighter?

Re: DAVINCI 16 | Big feature request list.

PostPosted: Fri Apr 05, 2019 4:49 am
by Clayton Von Isaacs
Oli Koos wrote:Are those movies in the background all done with fusion? Is that a clue that we integration with fusion will be even tighter?

I believe they were all edited with Resolve. Could be wrong but that is what I think they are saying with the banner

Re: DAVINCI 16 | Big feature request list.

PostPosted: Fri Apr 05, 2019 6:06 am
by Ugo Laurenti
waltervolpatto wrote:
I would like a change in that:
Out of the box it does show blackmagic images
There is a "client folder": if I populate that, it will load those images instead.

Would it be nice I'd I can show images from my projects in startup?


It would be better if we can use your images at startup with our clients...

:D

Re: DAVINCI 16 | Big feature request list.

PostPosted: Fri Apr 05, 2019 4:57 pm
by VioletWolf
Australian Image wrote:Just have a look at the website: https://www.blackmagicdesign.com/au.


APRIL 8th! 3 more sleeps!

:mrgreen:

Re: DAVINCI 16 | Big feature request list.

PostPosted: Fri Apr 05, 2019 7:15 pm
by waltervolpatto
Clip, custom filters, smart filters and groups

If I ask to rename a group, please present the current name, not a generic (group #)

The ability to right click --> [duplicate smart filter]

Re: DAVINCI 16 | Big feature request list.

PostPosted: Fri Apr 05, 2019 9:38 pm
by danielstonehouse
Tom Early wrote:
Paul Carlin wrote:I would like to add another checkbox to the Render Settings:

Disable edit and input sizing
Disable output sizing and blanking
Force sizing to highest quality
Force debayer to highest quality


why?


Because rendering a lengthy project to individual clips with output blanking accidentally left on and then having to re render is a far too frequent occurrence for the average working colourist.

The situations where you would want output sizing and blanking to apply to individual clip renders are pretty rare (maybe making proxies for a project with weird centre cut frame extraction or something)?

While we are at it, make XML generation an explicit checkbox, rather than a magical option with certain render settings presets.


Sent from my iPhone using Tapatalk

Re: DAVINCI 16 | Big feature request list.

PostPosted: Fri Apr 05, 2019 9:43 pm
by danielstonehouse
Oh, and an option to set an upper limit for source res would be much appreciated.

Ie if you set a threshold of UHD you could render everything at source res, apart from the 6k and 8k footage, which would be limited to fit inside 3840 x 2160


Sent from my iPhone using Tapatalk

Re: DAVINCI 16 | Big feature request list.

PostPosted: Fri Apr 05, 2019 11:01 pm
by waltervolpatto
Clip attributes, tinecode

1) ability to select multiple clips and set a timecode (note you can do it once at the time)
2) the ability to switch between frame count and embedded after you imported the clips (media page).

Those will make vfx assembly much easier

Re: DAVINCI 16 | Big feature request list.

PostPosted: Mon Apr 08, 2019 6:59 pm
by Paul Carlin
Tom Early wrote:
Paul Carlin wrote:I would like to add another checkbox to the Render Settings:

Disable edit and input sizing
Disable output sizing and blanking
Force sizing to highest quality
Force debayer to highest quality


why?


Thank you Danielstonehouse for stepping in to answer for me. Often I need to render individual clips for DRS or VFX to deal with QC fixes and I want individual clips (I need to be able to name each of them) that match the original camera sources. Output blanking has been a nuisance when doing this, so to be able to disable it would be a time saver.

Re: DAVINCI 16 | Big feature request list.

PostPosted: Tue Apr 09, 2019 10:00 pm
by BrianDors
Tom Early wrote:
it's already got Star Wipe, everything else is redundant


The greatest quote on this forum.

Re: DAVINCI 16 | Big feature request list.

PostPosted: Wed Apr 10, 2019 10:45 pm
by Oli Koos
Hi,

Here is my short term feature request list for things that I think should not wait for v17 and should still be integrated into the final build of v16.

- Make Zoom shortcuts persistent over the different pages. At the moment in the Edit/Color page it is cmd + mouse wheel while in Fusion it is ctrl + mouse wheel. That makes no sense.

- Edit Page has a blade icon to cut, while Fairlight has a scissor. (why?) (in cut page it has yet again a another name (cut) and icon, so three different icons and three different names for the same tool!

- In Fusion some (if not all the new) effects do not show up in the effect library, while they do in the shift space search bar. Also, why not also integrate a search function in the effect library as it is the case in the Edit and Color page.

- Fusion, please bring back the picon-images for the effects that used to be in Fusion standalone 9, makes it so much easier for a new user to get to know what the effects do

- Edit, please bring back the contextual duplicate timeline function (right-click on a timeline clip in the media pool, timeline - duplicate timeline (plenty of space there and it will not confuse anybody).

- color page, please bring the fabulous spline editor from Fusion to the color page. The color page keyframes need some real love. You can not do any splines, as you can do in the Edit or Fusion page, and this is again inconsistent.

- Edit Page, Text tool, do we still need both? Maybe make the old text tool only available in the options by checking, "enable legacy text tool"

- As a personal opinion, I would not activate the Cut page on default while this page is still in such an early stage. Curious users could still activate it in the workspace - show page menu.

- The Cut page could fill up an entire forum topic, but I think Bins should also be consistent as it is in the Edit Page. At the moment it does actually slow us down if we do want to use a Bin workflow in the Cut page.

v16 is a good build, great work as always, but it could use some more consistency.

Re: DAVINCI 16 | Big feature request list.

PostPosted: Sun Apr 14, 2019 12:35 pm
by gnuyork
Doing my first cut in Resolve 15 (because..ahem... Premiere can't read the BRAW files from my new BMPCC...caught me by surprise, actually).

I'm not sure what's all implemented in version 16, and I have yet to read through this thread...

Right off the bat, clips in the bin in list view...can be labeled with a color, but you only see the color on the timeline. I need to see those colors in the bin...in list view. Unless I'm missing something.

2nd... and don't laugh...but I have been cutting in FCP from the first version up to version 7 and switched to Premiere when FCPX came out. One thing I liked is that I could still use the FCP7 keyboard shortcuts in Premiere and still make a few custom tweaks to my keyboard shortcuts like using command shift to move clips up or down tracks in the timeline to be more like FCP7 (That didnl;t carry over into Premiere with the FCP7 shortcuts). I see Resolve has the keyboard layouts for FCPX but not 7.

One of those is the "Add Edit" shortcut that I can assign to any button. I like it to be the tilda key...I'm right handed and use a Wacom and my left finger rides that tilda key more than anything else in my edits....is this possible in Resolve 15? I can't seem to figure it out.

I'm sure there I will be needing more...but I've yet to start my first project. I'm procrastinating :D

PS - LOVING the BMPCC 4k.

Re: DAVINCI 16 | Big feature request list.

PostPosted: Sun Apr 14, 2019 6:16 pm
by Jim Simon
Oli Koos wrote:- Edit Page, Text tool, do we still need both?


Yes, we do. There are differences, and advantages, between them.

Re: DAVINCI 16 | Big feature request list.

PostPosted: Sun Apr 14, 2019 9:58 pm
by Oli Koos
Jim Simon wrote:
Oli Koos wrote:- Edit Page, Text tool, do we still need both?


Yes, we do. There are differences, and advantages, between them.

What do you have in the text tool that you do not have in the text+?

Re: DAVINCI 16 | Big feature request list.

PostPosted: Mon Apr 15, 2019 12:08 am
by Dermot Shane
later in the beta i would like to see the tear-off scopes be able to:
1) display mutiple instances of a view
2) have 6 up and 8 up settings for those of us with dual larger ui monitors / 21:9 mon's

Re: DAVINCI 16 | Big feature request list.

PostPosted: Mon Apr 15, 2019 2:20 am
by waltervolpatto
Dermot Shane wrote:later in the beta i would like to see the tear-off scopes be able to:
1) display mutiple instances of a view
2) have 6 up and 8 up settings for those of us with dual larger ui monitors / 21:9 mon's


+1

Re: DAVINCI 16 | Big feature request list.

PostPosted: Mon Apr 15, 2019 5:55 am
by Adrian Mcyorian
Jim Simon wrote:
Oli Koos wrote:- Edit Page, Text tool, do we still need both?


Yes, we do. There are differences, and advantages, between them.
Make different sizes or color on same node of text+ is a pain...(I know, modifiers and stuff) but... I'd love a combination of two tools in one!... Easy and power...

Enviado desde mi MI 8 Lite mediante Tapatalk

Re: DAVINCI 16 | Big feature request list.

PostPosted: Mon Apr 15, 2019 8:43 pm
by Dmitry Shijan
Just copy some of my requests from [Davinci] Resolve 17 | Big Feature Requests list viewtopic.php?f=21&t=88857&start=50

- Separate simplified "Cut" page only makes things more complicated. My opinion is it is better just implement more useful features to one single solid normal universal Timeline. Unify, simplify it and make more user friendly.

- Starting from 4-5 tracks in stack "Cut" page timeline became near unusable and takes more space than classic Edit page timeline. And if slightly redesign Edit page timeline it may hold even more tracks in same amount of space.

- Option to remove fixed bottom audio tracks area and be able to arrange audio and video tracks to any position. Fixed audio tracks area from early days classic fcp/premiere design feels very outdated and not always useful.
- Option to drag and drop tracks up and down with mouse.
- Option to view Marker extended vertical guide lines across all timeline.
- Option to see horizontal Guides for each track, or visually separate tracks with light tint.
- Option to add Effects and filters to the tracks
- Option to be able grab to middle toolbar area at any empty space to move it up or down (similar to FCPX/ Motion). Currently i need to grab to tiny line only.
Option to Pin track on top/bottom of the Timeline. In situation when need always visible reference audio or video track
- Option to change UI tint (lighter grey-darker grey)

- Option to add simple drag and drop crossfades that don't cut clips when you move them. Similar to used in Vegas, SoundForge and Reaper editors. Shift+Alt when dragging is not the same. It works only in one direction.

- Unify Timeline navigation keys, mouse+key modifiers and scroll wheel behavior between Edit, Fusion, Fairlight and Color Pages

- RED IPP2 processing in OFX CST node

-Ability to preview on external monitors without BMD card.

- Finally fix side pixel line problem when set Pan/Tilt to 0.5px, required to fix Cross Hatching effect.
problem described in details here:
viewtopic.php?f=2&t=51936&p=497763#p497763
viewtopic.php?f=21&t=75290&p=456601#p456601

- Timeline Shift+Z keyboard switch gives you quick zoom to all clips view level and back that makes "instant zoom" Cut page logic and arguments like "zooming takes so many time" even more useless.
But even Shift+Z keyboard switch needs some improvement. For unknown reason it always leaves a lot of empty space at the right when zoomed out to all clips view.

- Take a look at Vegas editor timeline "culture". For my opinion it has perfect timeline logic that saves tons of time during navigation and editing. One single timeline field that can be zoomed horizontally and vertically, flexible track height, navigation with middle mouse scroll. Total freedom in placing and mixing audio and video tracks in any position. You never think what button to press and where to scroll, overlap or replace. Scroll, scroll, drag, drag, S-button to split, simple overlap clips to crossfade. If you don't like how crossfade look - just move clip back. That's actually all you need to edit and concentrate on story but not at the multiple complicated buttons learning.

Re: DAVINCI 16 | Big feature request list.

PostPosted: Mon Apr 15, 2019 8:48 pm
by Dmitry Shijan
Gamut Scope tool also may be improved in future:
- Visualize gamuts as 3d model
- show different gamut projection types
- slicer slider to see part of the gamut projection at specified lightness level

Re: DAVINCI 16 | Big feature request list.

PostPosted: Mon Apr 22, 2019 3:04 pm
by Oli Koos
I was just thinking how much I miss the old storyboard function from Fast Media AG. Liquid (aka pinnacle liquid, aka Avid Liquid). Avid media composer has it now for awhile called storyboard editing and
Premiere Pro has it now as well since the last update. Storyboarding allows you to freely drag and drop clips on a sort of desktop to roughly sketch a narrative together (imagine how useful this can be for documentaries). I would love seeing this in Resolve as well.




Re: DAVINCI 16 | Big feature request list.

PostPosted: Mon Apr 22, 2019 6:19 pm
by VioletWolf
Plus one for Story Boards!
(You should post this suggestion on the ver16 beta forum. I don't know if any devs are still reading this thread, they're pretty busy over there)

Re: DAVINCI 16 | Big feature request list.

PostPosted: Tue Apr 23, 2019 5:10 am
by Jack Swart
Most users would know that it possible to Export the Project as a .drp file which contains everything, except the media, to recreate the project on another system, even across different operating systems.

My idea is to introduce an export dialog box that appears on quitting.

This box would ask a simple question.

Do you wish to export (or save) your project to....

The destination directory is simply the folder in which the media for that project is located or it can be changed, in which case it is remembered.

There are three possible responses..

Yes, No and Do not show this dialog box again...

Just an idea...

Re: DAVINCI 16 | Big feature request list.

PostPosted: Tue Apr 23, 2019 7:42 pm
by waltervolpatto
Jack Swart wrote:Most users would know that it possible to Export the Project as a .drp file which contains everything, except the media, to recreate the project on another system, even across different operating systems.

My idea is to introduce an export dialog box that appears on quitting.

This box would ask a simple question.

Do you wish to export (or save) your project to....

The destination directory is simply the folder in which the media for that project is located or it can be changed, in which case it is remembered.

There are three possible responses..

Yes, No and Do not show this dialog box again...

Just an idea...


Doesn't archive a project with luts and still active that?

Re: DAVINCI 16 | Big feature request list.

PostPosted: Tue Apr 23, 2019 9:25 pm
by Jack Swart
Just proposing an idea where a simple dialog box on quit achieves:

1. A single file that contains your project in a location set by the user.

2. A safety to guard against a corrupt database and project loss.

I have read of quite a few instances where DBs have crashed leaving the users high and dry and also power users recommending a .drp file as a backup.

This idea is simply to prompt the creation of a backup every time you exit the app.

Re: DAVINCI 16 | Big feature request list.

PostPosted: Tue Apr 23, 2019 9:56 pm
by Margus Voll
waltervolpatto wrote:
Dermot Shane wrote:later in the beta i would like to see the tear-off scopes be able to:
1) display mutiple instances of a view
2) have 6 up and 8 up settings for those of us with dual larger ui monitors / 21:9 mon's


+1
HML scope on top of that.

Sent while walking

Re: DAVINCI 16 | Big feature request list.

PostPosted: Wed Apr 24, 2019 12:44 pm
by José Santos
The new adjustment clip is really awesome, but having to go to the edit page to apply it can be annoying!

It would be really awesome to be able to add the adjustment clip from the color page!

It could be as easy as defining an in and out point in the timeline (since we can now in define a custom loop region) and right click to find the option to add adjustment clip in the sub menu. That would place an adjustment clip over any clip within the previously selected in and out points.

I think this makes a lot of sense and does not sound that complicated to implement (at leat to someone like who has no idea about programming)

Re: DAVINCI 16 | Big feature request list.

PostPosted: Wed Apr 24, 2019 5:12 pm
by waltervolpatto
José Santos wrote:The new adjustment clip is really awesome, but having to go to the edit page to apply it can be annoying!

It would be really awesome to be able to add the adjustment clip from the color page!

It could be as easy as defining an in and out point in the timeline (since we can now in define a custom loop region) and right click to find the option to add adjustment clip in the sub menu. That would place an adjustment clip over any clip within the previously selected in and out points.

I think this makes a lot of sense and does not sound that complicated to implement (at leat to someone like who has no idea about programming)



I'm so happy to have it that I don't mind to have it in the edit page at all.

Re: DAVINCI 16 | Big feature request list.

PostPosted: Mon Apr 29, 2019 1:46 am
by westgate
Would like to be able to make simple cuts of BRAW files in BRAW player. At least in half. I'm filming myself so half files are for nothing. It would save gigabytes of space... Not sure if anybody talked about it/need it...

Re: DAVINCI 16 | Big feature request list.

PostPosted: Mon Apr 29, 2019 1:50 pm
by Piotr Podermanski
Two simple things I miss on daily basis.

1. APPLY GRADING from another clip with middle mouse button in EDIT workspace (like it is in COLOR workspace) It's a simple feature which would speed up the workflow, as it would allow rough grading of similar shots without the need of constantly jumping between EDIT and COLOR workspace.

2. Mute all audio button next to bypass grading button. When one wants to edit video only without audio distracting the flow.

Re: DAVINCI 16 | Big feature request list.

PostPosted: Wed May 01, 2019 9:55 pm
by mikematzdorff
plus one on being able to select multiple items in the EDIT INDEX and adjust metadata or clip info (ala FCPX)

waltervolpatto wrote:edit, edit index.


Upon select a single or multiple clips, right click on them, i should be able to change clip color ad if i am in the timeline or add/ remove a flag, or place a marker (that will be placed on the clip art frame 1).

For example, I have a timeline where i can make a filter and find a bunch of clips (vfx in this case) and i want to mark then yellow so i can easily find them in the edit or color page.

Can't do it unless i go shoot by shot and in the timeline i right click and change there

Re: DAVINCI 16 | Big feature request list.

PostPosted: Wed May 08, 2019 8:49 pm
by Jim Simon
Oli Koos wrote:What do you have in the text tool that you do not have in the text+?


Simplicity and an absence of Fusion rendering.

For example, try changing the color of a single word in both types of titles.

Re: DAVINCI 16 | Big feature request list.

PostPosted: Wed May 08, 2019 8:52 pm
by Jim Simon
José Santos wrote:It would be really awesome to be able to add the adjustment clip from the color page!


You can't edit anything from the Color page. That's not it's purpose.

Re: DAVINCI 16 | Big feature request list.

PostPosted: Thu May 09, 2019 2:22 am
by Peter Chamberlain
Thanks for all the feedback guys.

As v16 feature set is already disclosed at NAB im going to lock this thread and let new ideas spring up in the v17 request thread.