Page 1 of 1
DaVinci Resolve 14 won´t open
Posted:
Wed Jun 20, 2018 2:31 amby Beto3220
My resolve 14 won´t open, i tried to see if in the task manager it´s running but nothing happened.
I have a windows 10 with nvidia quadro p400 2gb
Here is the log:
https://drive.google.com/open?id=1oGkFD ... Beb0JMWO9I
Re: DaVinci Resolve 14 won´t open
Posted:
Wed Jun 20, 2018 9:29 amby Peter Chamberlain
Roberto, your GPU is not powerful enough.
You can find a configuration guide here, in the centre section, that describes the min configs.
https://www.blackmagicdesign.com/suppor ... and-fusion
Re: DaVinci Resolve 14 won´t open
Posted:
Wed Jun 20, 2018 4:12 pmby Beto3220
So you’re telling me that the reason for not opening resolve is the gpu? But at first I work in the same computer and I didn’t have problems with the GPU
Re: DaVinci Resolve 14 won´t open
Posted:
Thu Jun 21, 2018 4:31 amby Uli Plank
Resolve is very GPU intensive, don’t make conclusions based on other software.
Re: DaVinci Resolve 14 won´t open
Posted:
Thu Jun 28, 2018 5:25 pmby Beto3220
I’m not making conclusion based in other software, the question is why i work normally first and the other day resolve won’t open. My question is if this happened because the GPU is below the requirements.
Re: DaVinci Resolve 14 won´t open
Posted:
Fri Jun 29, 2018 2:48 amby Uli Plank
The problem is like this: there is no clear dividing line between functioning or not functioning on underpowered hardware. You may just add one little extra task or one a bit more demanding format or length of clip or whatever and it quits. What can BM do other than telling you what's really needed?
They could strictly have the software announce: "your computer is not up to spec" and refuse to start. But then many might complain: "but it still worked the other day". Just accept that you are on your own if your hardware is not up to spec. It may work to a certain point, but I'll not be reliable.
Try 12.5, it's easier on the hardware and still available.
Re: DaVinci Resolve 14 won´t open
Posted:
Fri Jul 06, 2018 3:57 amby Dwaine Maggart
The Quadro P400 has CUDA Compute capability 6.1. And it appears to have 2GB of VRAM.
So it should be fine for general HD workflows in Resolve 14 and 15.
And, it was working fine up to 6-13-2018.
It stopped working when you next tried to run Resolve on 6-19-2018.
So the million dollar question is: what changed on your system between 6-13 and 6-19?
Did you do a Windows update? An NVIDIA driver update? Something else?
Did you perhaps add another display? Or move the existing display to another display port on the PC?
I also notice you have forced GPU mode to OpenCL. That GPU should work better with CUDA, if you have a current NVIDIA driver loaded.