Page 1 of 1

16b4 Stabilization in inspector disappeared

PostPosted: Thu Jun 20, 2019 10:12 am
by Vi-Dan
hey guys,
just noticed, stabilization option sometimes disappears in the inspector in the edit page.
reopen the projects fixes the problem.

Re: 16b4 Stabilization in inspector disappeared

PostPosted: Sat Aug 24, 2019 12:17 pm
by Reg Wrench
It’s still doing this in the release version of 16 ...

Re: 16b4 Stabilization in inspector disappeared

PostPosted: Thu Aug 29, 2019 2:47 pm
by Peter Chamberlain
Is the header for stabilizing there and just controls missing?
Which OS?

Re: 16b4 Stabilization in inspector disappeared

PostPosted: Sun Sep 15, 2019 4:01 pm
by spencer_moshian
Windows 10, 16.0.0.060 - just experienced this. Header is gone.

Re: 16b4 Stabilization in inspector disappeared

PostPosted: Fri Sep 20, 2019 7:38 am
by SimplSam
Ditto -- This has been happening (rarely) since the first 16 Beta for me, but only happened again recently today on 16.1b3 - again where the menu/dialog disappears on the EDIT page.

Stabilisation is still available on the CUT page. I had to restart Resolve to get it back on EDIT. ReOpening / Swapping projects didn't work.

also being discussed here:
viewtopic.php?f=21&t=99033
viewtopic.php?f=32&t=98703

Re: 16b4 Stabilization in inspector disappeared

PostPosted: Fri Oct 11, 2019 8:40 pm
by ricardo marty
Peter Chamberlain wrote:Is the header for stabilizing there and just controls missing?
Which OS?


Both are missing all I get is clip audio attributes, nothing foe video, Running 16.1.3 Had it before.


Ricardo Marty

Re: 16b4 Stabilization in inspector disappeared

PostPosted: Sun Nov 10, 2019 7:55 pm
by Christian Korahyn
Still missing...
16.1.1.005

Re: 16b4 Stabilization in inspector disappeared

PostPosted: Sun Nov 10, 2019 9:38 pm
by Mel Matsuoka
I’m also getting this periodically in 16.1.1 on macOS 10.13.6


Sent from my iPhone using Tapatalk Pro

Re: 16b4 Stabilization in inspector disappeared

PostPosted: Sun Nov 10, 2019 9:54 pm
by ricardo marty
Mel Matsuoka wrote:I’m also getting this periodically in 16.1.1 on macOS 10.13.6


Sent from my iPhone using Tapatalk Pro


Its also happening to me. Im on version 16

Ricardo Marty

Re: 16b4 Stabilization in inspector disappeared

PostPosted: Mon Nov 11, 2019 2:20 pm
by IngolfZ
Christian Korahyn wrote:Still missing...
16.1.1.005

Still existing in 16.1.1.005 und Win 10
DVR_16.1.1_Inspector.JPG
DVR_16.1.1_Inspector.JPG (35.76 KiB) Viewed 7084 times

Re: 16b4 Stabilization in inspector disappeared

PostPosted: Mon Nov 11, 2019 2:30 pm
by spencer_moshian
IngolfZ wrote:
Christian Korahyn wrote:Still missing...
16.1.1.005

Still existing in 16.1.1.005 und Win 10
DVR_16.1.1_Inspector.JPG


It occasionally disappears, not always missing

Re: 16b4 Stabilization in inspector disappeared

PostPosted: Wed Nov 13, 2019 9:31 am
by ChipKng
Just like the keyframe modifiers in the retime control: https://forum.blackmagicdesign.com/viewtopic.php?f=32&t=101018

Re: 16b4 Stabilization in inspector disappeared

PostPosted: Tue Nov 26, 2019 10:51 pm
by mwyman
Still having the stabilizer issue 11/26/2019. Seems like recent version caused it.

Re: 16b4 Stabilization in inspector disappeared

PostPosted: Sun Dec 08, 2019 11:31 am
by inte8rior
Still happening in 16.1.1.005 / Mac OS Mojave

Re: 16b4 Stabilization in inspector disappeared

PostPosted: Mon Dec 16, 2019 11:16 pm
by Dmitry Kitsov BMD
Stabilization in the EDIT page cannot operate when more than one video clip is selected.
When you see this feature disappears in the inspector check that:

A. you do not have more than one clip selected.
B. check that you do not have a current clip Linked to any other than the audio clip. Linking more than one video clip together causes one or the other to be selected.
C. If you have to have more than one video clip linked for your workflow, Option-clicking the clip will allow you to temporarily bypass the link and have only the currently clicked on clip selected.

Re: 16b4 Stabilization in inspector disappeared

PostPosted: Tue Dec 17, 2019 1:00 am
by spencer_moshian
I've found it occurs if I stabilize a clip in a node on the color page. After that, when I go back to the edit page, the Stabilization section disappears. I'm not sure if this happens every time, I've just noticed that when this does happen, I've often just stabilized the clip on the color tab.

Re: 16b4 Stabilization in inspector disappeared

PostPosted: Thu Dec 26, 2019 1:02 pm
by Reddydrag
Dmitry Kitsov BMD wrote:Stabilization in the EDIT page cannot operate when more than one video clip is selected.


Ok, but that's NOT the case. Just happens randomly. It's DR just being unstable.

Re: 16b4 Stabilization in inspector disappeared

PostPosted: Fri Dec 27, 2019 5:22 pm
by Dmitry Kitsov BMD
Hello, Piet,
next time when you observe this behavior, please consider first Option-clicking the video clip you are trying to Stabilize. Do you see the Stabilize Pallet reappear then?
Please understand that my suggestion based on the deep analysis of more than one case, where a user actually reached out to support and provided project files. Invariably linked clips were involved.

Re: 16b4 Stabilization in inspector disappeared

PostPosted: Thu Jan 09, 2020 6:41 pm
by Ben Watson
I too have had stablize disappear. Option clicking the clip did nothing.
Only a restart of Resolve fixed it.

using version 16.1.2.026

Re: 16b4 Stabilization in inspector disappeared

PostPosted: Fri Jan 10, 2020 4:31 pm
by infocus_jc
Same here...

I can't see the stabilization tab in the inspector.
I have to restart resolve every time to have it back.

Resolve 16.1.2.026
Mac OS Mojave 10.14.6

Also, waveforms are not reliable at all... Sometimes it's here, sometimes it's not... It's really annoying (my cache folders are correctly setup)

Re: 16b4 Stabilization in inspector disappeared

PostPosted: Sun Jan 12, 2020 5:00 pm
by DerPaule13
Same here. Stabilizer just disappeared and reappeared after restart.

Re: 16b4 Stabilization in inspector disappeared

PostPosted: Thu Feb 06, 2020 10:37 pm
by Reddydrag
Dmitry Kitsov BMD wrote:Hello, Piet,
next time when. you observe this behavior, please consider first Option-clicking the video clip you are trying to Stabilize. Do you see the Stabilize Pallet reappear then?
Please understand that my suggestion based on the deep analysis of more than one case, where a user actually reached out to support and provided project files. Invariably linked clips were involved.

I think that you guys really need to work on the quality of your support. Have you really read all the posts here? You guys ask for specs all the time, and when given, the support is nowhere to be found or heard of again. Besides... option-click will not work in my case, now would it (read the specs, PLEASE).
BMD support became as unstable as DR16.x.x! How else would you explain the constant ignoring of all the those customer problems with the latest versions of DR. Problems that are clearly software based.

Re: 16b4 Stabilization in inspector disappeared

PostPosted: Fri Feb 07, 2020 5:38 am
by Shrinivas Ramani
Piet (or others),
Could you post a case where you selected exactly one video clip and you couldn't find the stabilization option shown in the inspector?

Thanks
Shrinivas

Re: 16b4 Stabilization in inspector disappeared

PostPosted: Fri Feb 07, 2020 9:25 am
by PieroLass
it happens random, but if you restart davinci you find the stabilization back...

Re: 16b4 Stabilization in inspector disappeared

PostPosted: Fri Feb 21, 2020 12:48 pm
by dsol1980
this happened to me in a project - only one video clip was selected, and it was unlinked to any other video clips (just some audio clips)

Re: 16b4 Stabilization in inspector disappeared

PostPosted: Mon Feb 24, 2020 2:29 pm
by juntingzhou
I have the same problem.
Op clicking doesn't work and the clip is absolutely not linked to any other clips...
And this customer service response is incredibly bad lol
I thought BMD was good at customer services.

Re: 16b4 Stabilization in inspector disappeared

PostPosted: Tue Feb 25, 2020 10:58 pm
by CrescentmoonHD
Yes .. I have been having the same problem with 16.1 .. On the new Mac Pro 2019 in Catalina.
Stabilization just disappears randomly .. Must restart Resolve to correct!
FYI!!
thank you!
mark

Re: 16b4 Stabilization in inspector disappeared

PostPosted: Wed Feb 26, 2020 2:22 pm
by dsol1980
I emailed the technical team at Black magic and they said that it will probably be fixed in the next release. They thought that it mostly happened on Mac, although it happens also on my PC version

Re: 16b4 Stabilization in inspector disappeared

PostPosted: Fri Mar 20, 2020 5:00 pm
by paultom
This is still happening for me in release 16.2. Quitting & restarting sorts it, but that's obviously a pain - 3 times today so far.

Re: 16b4 Stabilization in inspector disappeared

PostPosted: Fri Mar 27, 2020 7:51 pm
by devinpickering
Screen Shot 2020-03-27 at 3.48.56 PM.png
Screen Shot 2020-03-27 at 3.48.56 PM.png (854.96 KiB) Viewed 3932 times
Screen Shot 2020-03-27 at 3.48.56 PM.png
Screen Shot 2020-03-27 at 3.48.56 PM.png (854.96 KiB) Viewed 3932 times



Same thing here. All of a sudden, my options for stabilizing have disappeared. Take a look. This happens on every clip in the timeline now. ?????

Running 16.1.2

Re: 16b4 Stabilization in inspector disappeared

PostPosted: Tue Apr 14, 2020 6:45 pm
by caojbr
It's SOLVED to me!

I simply closed the app and started again, and the Stabilisation option came back.

Resolve 16.2.0.55, Mac OSX