- Posts: 4
- Joined: Fri Sep 10, 2021 7:02 am
- Real Name: Enzo Piccianato
Because - if I recall correctly - what your describing is a pulldown sequence. There is an option in the loader to deal with this automatically.
Just go into the Loader's import settings and adjust it to your needs.
This is a quote from the manual. It sounds a lot like what you're after.
Import Mode
This menu provides options for removing pull-up from an image sequence. Pull-up is a reversible
method of combining frames used to convert 24 fps footage into 30 fps. It is commonly used to
broadcast NTSC versions of films.
– Normal: This passes the image without applying pull-up or pull-down 2:3.
– Pull Up: This removes existing 3:2 pull-down applied to the image sequence, converting from 30
fps to 24 fps 2:3.
– Pull Down: The footage has pull-down applied, converting 24 fps footage to 30 fps by creating
five frames out of every four. The process mode of a Loader set to Pull Down should always be
Full Frames.
First Frame
This menu appears when the Import Mode is set to either Pull Up or Pull Down. It is used to determine
which frame of the 3:2 sequence is used as the first frame of the loaded clip.
Detect Pull-Down Sequence
This button is used to detect and set the pull-up sequence of the footage automatically. It only works if
Pull-Up or Pull-Down is first selected from the Import Mode menu. If it succeeds in detecting the order,
the First Frame control automatically sets to the correct value.
Hope it helps