- Posts: 36
- Joined: Fri Sep 13, 2013 4:25 pm
Wed Apr 14, 2021 9:28 pm
The title pretty much says it. I'm feeding the MiniConverter a UHD SDI signal from a BM Decklink Studio 4K, and feeding an Osee LCM215 HD monitor via HDMI. The MiniConverter will not down convert to a signal the monitor can recognize.
If I output HD from the Decklink, the MiniConverter converts it to HDMI the monitor can handle reliably, at pretty much any frame rate I'd want to use. If I output 2K, the MiniConverter converts it to HDMI, but does not downscale, so the monitor sees a center cut. If I output UHD from the Decklink, the monitor gets an unrecognizable signal, regardless of frame rate.
I suspected cabling, but the setup works perfectly if I replace the MiniConverter with an Atomos Shogun.
Any ideas?
If I output HD from the Decklink, the MiniConverter converts it to HDMI the monitor can handle reliably, at pretty much any frame rate I'd want to use. If I output 2K, the MiniConverter converts it to HDMI, but does not downscale, so the monitor sees a center cut. If I output UHD from the Decklink, the monitor gets an unrecognizable signal, regardless of frame rate.
I suspected cabling, but the setup works perfectly if I replace the MiniConverter with an Atomos Shogun.
Any ideas?
David Fuller
AirStream Pictures
Portland, ME
airstreampictures.com
AirStream Pictures
Portland, ME
airstreampictures.com