Blackmagic Forum

We have the Cintel 2 scanner, and want to wire it to a sound follower.

Does anyone know the pinouts of the XLR style connector for the biphase output on the Cintel? We need them to make up a cable to the sound follower.

I'm also hoping that the audio inputs on the Cintel will allow us to feed the audio from the Sound Follower into the Cintel and capture the sepmag audio at the same time as the scan, but can't find any documentation on this in the manual.

Any help appreciated!

Hi,

all of our XLR outputs will comply to the XLR audio standard. So for the +/- and GND pins just refer to standard XLR wiring.

Hi,

Pin 1 = GND (Screen)
Pin 2 = B+ Phase
Pin 3 = A+ Phase

If follower goes in opposite direction to scanner; transpose A/B.

Thanks, will try that out.

How do I set the audio capture in Resolve to be from the XLR inputs?

Resolve 17 has the support. You will see 'External Audio' option in audio settings.