- Posts: 1
- Joined: Mon Nov 19, 2012 10:32 am
Please help, unable to make this card work. Looks like a driver issue.
Device is detected, but Capture freezes
Device is detected, but Capture freezes
- Code: Select all
[root@coder ~]# uname -a
Linux coder.hostname 2.6.32-279.14.1.el6.x86_64 #1 SMP Tue Nov 6 23:43:09 UTC 2012 x86_64 x86_64 x86_64 GNU/Linux
[root@coder ~]# cat /etc/redhat-release
CentOS release 6.3 (Final)
[root@coder ~]# dmesg | grep -i black
blackmagic: module license 'Proprietary' taints kernel.
blackmagic: Loading driver (version: 9.6.7a19)
blackmagic_driver 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
blackmagic_driver 0000:01:00.0: setting latency timer to 64
blackmagic_driver 0000:01:00.0: setting latency timer to 64
blackmagic: Successfully loaded device "blackmagic0" [pci@0000:01:00.0]
[root@coder DeviceList]# ./DeviceList
=============== DeckLink SDI ===============
Attribute list:
Serial port present ? Yes
Serial port name: /dev/blackmagic/serial0
Number of sub-devices: 1
Sub-device index: 0
Number of audio channels: 8
Input mode detection supported ? Yes
Internal keying supported ? Yes
External keying supported ? No
HD-mode keying supported ? No
Supported video output display modes and pixel formats:
NTSC 720 x 486 29.97 FPS 8-bit YUV 10-bit YUV
NTSC 23.98 720 x 486 23.976 FPS 8-bit YUV 10-bit YUV
PAL 720 x 576 25 FPS 8-bit YUV 10-bit YUV
HD 1080p 23.98 1920 x 1080 23.976 FPS 8-bit YUV 10-bit YUV
HD 1080p 24 1920 x 1080 24 FPS 8-bit YUV 10-bit YUV
HD 1080p 25 1920 x 1080 25 FPS 8-bit YUV 10-bit YUV
HD 1080p 29.97 1920 x 1080 29.97 FPS 8-bit YUV 10-bit YUV
HD 1080p 30 1920 x 1080 30 FPS 8-bit YUV 10-bit YUV
HD 1080i 50 1920 x 1080 25 FPS 8-bit YUV 10-bit YUV
HD 1080i 59.94 1920 x 1080 29.97 FPS 8-bit YUV 10-bit YUV
HD 1080i 60 1920 x 1080 30 FPS 8-bit YUV 10-bit YUV
HD 720p 50 1280 x 720 50 FPS 8-bit YUV 10-bit YUV
HD 720p 59.94 1280 x 720 59.9401 FPS 8-bit YUV 10-bit YUV
HD 720p 60 1280 x 720 60 FPS 8-bit YUV 10-bit YUV
Supported video output connections:
SDI
Supported video input connections:
SDI
[root@coder ~]# /usr/bin/BlackmagicFirmwareUpdater status
blackmagic0 [DeckLink SDI] 0xff PLEASE_UPDATE
[root@coder ~]# /usr/bin/BlackmagicFirmwareUpdater update 0
Firmware update failed[/] [ ] 0.00% completed
[root@coder DeviceList]# ls /dev | grep black
blackmagic
blackmagic0
blackmagic_serial0
[root@coder DeviceList]# lspci | grep -i black
01:00.0 Multimedia video controller: Blackmagic Design Device a11b (rev ff)
[root@coder Capture]# ./Capture -m6 -p0 -n1